Hi can you please help me find out if my treadmill motor is going bad? when I turn it ON it starts just fine but as soon as I step on it, it starts to slow down and then it comes to a complete stop then I step off of it and keeps running fine until i step on it again and it stops thank you I hope you can help me with detecting the problem
My Trotter 540 Supertrainer has been turning on by itself and then it goes as fast as it can, even faster than any program for running. I have had to turn off the power button switch, because it starts without a program being activated. It has started in the middle of the night when the power button was on.
need help with my pro form treadmill: when I started the treadmill, inclin went all the way up and machine is stuck; not moving. I unplugged and restarted and only thing I see is funny noise and beeping noise and light flashes at the incline box. What can I do at this point? Appreciate the help.
what is the best way to verify belt speed? at my gym it seems like each treadmills belt is running faster or slower than the displayed speed or speed setting. one of them at 6 mph seems like it is actually running much faster than that maybe closer to 7 mph, while another one may be set at 6mph and seems more true to that setting.
My treadmill goes at higher speeds and lags at speeds 1 & 2. I have not used it in years and had not lubricated it. After lubricating, it's rolling much better, it's just laggy at lower speeds as I said before. It slows upon standing on it. What do u think is happening? Should I lubricate again or check anything in particular? Thanks!
i have a maxpro treadmill, as soon i power it, time display flashing and program showing P1 on the screen, it only let you go up and down in timing only, when press start doesnt work, i have to feedle pressing speed control button and when i hear bip , it sometimes let me push start and starts at a very high speed, then go down to 2 speed then incline to 5% then stop button doesn t work , i have to stop it manullay. ANY IDEA PLEASE
I want a help. my trademill is being stop by its self after some second. can u tell what's the prob. ( its emergency stopper has been misplaced, I put a magnet instead)
what to do if belt is not moving freely when the machine is off, its very hard to move - ( My issue is that machine speeds up on its own , so it will be on 1 but speed up to go very fast )
The speed issue is most likely related to a bad motor control board. If you are standing on the belt and manually trying to walk it and it is not moving freely is most likely due to a worn walking belt. To discuss further you can give me a call at 888-362-1105 ext 298.
It may need to be calibrated or if it is speeding up on its own then it could be a failed motor control board. Do you have the full model number off the machine?
Hi can you please help me find out if my treadmill motor is going bad? when I turn it ON it starts just fine but as soon as I step on it, it starts to slow down and then it comes to a complete stop then I step off of it and keeps running fine until i step on it again and it stops thank you I hope you can help me with detecting the problem
Electrical issue or a mechanical issue. Thanks for helping me narrow it down. Lol
Glad to help!
My Trotter 540 Supertrainer has been turning on by itself and then it goes as fast as it can, even faster than any program for running. I have had to turn off the power button switch, because it starts without a program being activated. It has started in the middle of the night when the power button was on.
Richard Brockunier I am having the same problem.....can anyone help
need help with my pro form treadmill: when I started the treadmill, inclin went all the way up and machine is stuck; not moving. I unplugged and restarted and only thing I see is funny noise and beeping noise and light flashes at the incline box. What can I do at this point? Appreciate the help.
what is the best way to verify belt speed? at my gym it seems like each treadmills belt is running faster or slower than the displayed speed or speed setting. one of them at 6 mph seems like it is actually running much faster than that maybe closer to 7 mph, while another one may be set at 6mph and seems more true to that setting.
My treadmill goes at higher speeds and lags at speeds 1 & 2. I have not used it in years and had not lubricated it. After lubricating, it's rolling much better, it's just laggy at lower speeds as I said before. It slows upon standing on it. What do u think is happening? Should I lubricate again or check anything in particular? Thanks!
i have a maxpro treadmill, as soon i power it, time display flashing and program showing P1 on the screen, it only let you go up and down in timing only, when press start doesnt work, i have to feedle pressing speed control button and when i hear bip , it sometimes let me push start and starts at a very high speed, then go down to 2 speed then incline to 5% then stop button doesn t work , i have to stop it manullay. ANY IDEA PLEASE
I want a help. my trademill is being stop by its self after some second.
can u tell what's the prob.
( its emergency stopper has been misplaced, I put a magnet instead)
I have treadmill model jfo1b and there is a problem with error 07 !can you explain me how can I fix it?
what to do if belt is not moving freely when the machine is off, its very hard to move - ( My issue is that machine speeds up on its own , so it will be on 1 but speed up to go very fast )
The speed issue is most likely related to a bad motor control board. If you are standing on the belt and manually trying to walk it and it is not moving freely is most likely due to a worn walking belt. To discuss further you can give me a call at 888-362-1105 ext 298.
What if the treadmill goes faster then the setting when you start walking on it?
It may need to be calibrated or if it is speeding up on its own then it could be a failed motor control board. Do you have the full model number off the machine?
Sir I hava a customer that he is facing atumatic speed is increasing after 10 speed how we have solve that problem
Thanks
You're welcome!
any idea on how to reset it to factory settings. when i bought i only walk on it using up and down speed and incline sometimes
mine speeds up!!!
Mine too
Mine went so fast it almost killed me.
@cassl14 Nope not yet, it's just sitting in a room disconnected. Unfortunately, that wasn't sarcasm.
Almost broke my leg phew
🙄🙄🙄
Good
What is the E3 mean
Your sound is very low.