Super helpful Tanner.. no other video I've seen addresses the issue with having the throttle cut switch bound properly. I hit a snag and couldnt get my throttle servo to move in direct throttle and it turned out to be the throttle cut was not bound properly.
Thanks for the video Tanner. Really made it a lot easier setting up my first nitro on the VBCt. One question though, is there anyway to limit the maximum throttle value in the Direct Throttle mode? Just so it wouldnt potentially be able to rev so high in FM1 (where I have Direct Throttle selected).
By default it should display it, you have to be connected to the model of course. If your screen doesn’t have it, you can add any parameter by long holding down on the screen -> add the rpm signal….. shoot me a message on Facebook if you still can’t figure it out and I’ll try to help ya.
@@tanneringram1449 i mean after disconnct power...usualy vbar touch will show the log data example rpm , temp but my vbar touch just show log data controller...i will message u ...thank sir
@@firdausborhan6319 ahhh. Yes it only logs the data if it’s being read over the ESC telemetry. Sadly VBAR doesn’t log the rpm port itself or other data we have with nitro. I wish they did!
What’s the sensor config setting? I think I have the wrong setting as I was setting up my throttle servo and now my heli won’t change banks. My sensor Config is set a 5 right now. Using spektrum back plate sensor Vbar control
@@tanneringram1449 thank you! Somehow when I reset my settings for min/max throw it put it to 5 and my head speed wouldn’t change. Now it’s working thank you
Great video Tanner!!! My Raw 580 Nitro is almost done!!!
Tanner is a great asset to the FRRC Team. Thank for the comment Booboo. 😊
Thanks to your video, I found the RPM sensing display window. Thank you.👍👍
Awesome!
good info
Glad it was helpful!
Super helpful Tanner.. no other video I've seen addresses the issue with having the throttle cut switch bound properly. I hit a snag and couldnt get my throttle servo to move in direct throttle and it turned out to be the throttle cut was not bound properly.
Awesome!! Happy to help. 😊
I'm so happy Tanner Ingram was able to help you #TeamFlyRightRC.
Thanks for the video Tanner. Really made it a lot easier setting up my first nitro on the VBCt. One question though, is there anyway to limit the maximum throttle value in the Direct Throttle mode? Just so it wouldnt potentially be able to rev so high in FM1 (where I have Direct Throttle selected).
Yes you can, if you turn direct throttle off and instead set a curve for bank 1 you can set that up!
This video better be good Tanner!!
😆
Why after fly vbar touch not display rpm graph...what is problem..?..please help me...
By default it should display it, you have to be connected to the model of course. If your screen doesn’t have it, you can add any parameter by long holding down on the screen -> add the rpm signal….. shoot me a message on Facebook if you still can’t figure it out and I’ll try to help ya.
@@tanneringram1449 i mean after disconnct power...usualy vbar touch will show the log data example rpm , temp but my vbar touch just show log data controller...i will message u ...thank sir
@@firdausborhan6319 ahhh. Yes it only logs the data if it’s being read over the ESC telemetry. Sadly VBAR doesn’t log the rpm port itself or other data we have with nitro. I wish they did!
👍
What’s the sensor config setting? I think I have the wrong setting as I was setting up my throttle servo and now my heli won’t change banks. My sensor Config is set a 5 right now. Using spektrum back plate sensor Vbar control
Sensor config as in number of poles? Should be set at 1 pole in the VBAR (as it’s reading the back of the crank once per rotation)
@@tanneringram1449 thank you! Somehow when I reset my settings for min/max throw it put it to 5 and my head speed wouldn’t change. Now it’s working thank you
👍