Good day.. I just watched your 4 recent videos because i didnt watched it yet and i really love your great content with great products to reviewed.. I really appreciate for giving the timecodes in the description below. You really deserve more for your effort and being honest in your reviews. So helpful and informative.. Hope you'll make a video about Top 3 brand in every product quarterly so it will be our guide.. Thanks and more power to you. Keep safe and God bless.
Thanks mate! Hope to see this video sooner! Also, I just bought it and I don't know how long it takes to reach Melbourne, AU. This is very informative and well explained about monitor arm I've ever seen! Great job!
Bro can you put the lower monitor flat to table surface 45° or 70° and top monitor as flat to wall .... I want to see this set up and also how it looks when we add 2 more monitors in the same configuration and all screens be flat and not curved the size can be 27 inch but i would like 32inch 4 screen set up ... I would love to see a photo in community post if you can do this set up
Yea would be good for a lot of people. But I think it is hard to find longer ones that are gas spring. Most longer ones are fixed and don't extend out.
Seems I'm too late to the party as the product apparently is not available anymore. Nonetheless, you did a very good job reviewing this monitor arm. (I actually came here form the Ergotron LX Dual Monitor Arm, which is the only other alternative for two 34" Monitors I've found so far that allows horizontal and vertical alignment.
The monitor arm is very convenient. I also use dual monitor arms. The top of the desk is very clean. The video was very interesting! With love from Japan :)
Could you provide me with the measurement for the clamp beneath the desk? As in, after it is mounted, what is the distance between the bottom of the desk top and the bottom of the screw for the clamp. Thank you!
WOw that brand really is not expensive, im not sure what the quality is. But i just found one for a single monitor which also can rotate for just $39 us thats pretty nice!
This would be perfect but not sure if i wanna spend over $100 on a monitor arm, I get there is a difference in quality. Would a $47 one work well still??? This one def has more movement to it.
hello to anyone who could answer, would you recommend using the grommet mount on dual stack monitor? there is a hole for mounting a grommet pole arm on my desk and it is located near the left side of my table, i have noticed that there is a slight bend due to the weight of the two 24 inch monitors installed. do you think it's better to just have it mounted at the center of the table using the c clamp instead? thanks!
How hard is it to lift both monitors up? I have electric desk and when I stand up, I need monitor to be higher than usually. I also lift my desk higher when I am eating and then I usually have to adjust the monitor. Stacked monitors is probably making this process slower.
Hey mate! Just wanted to ask do you still use this monitor arm 2 years later and what is your updated short review And have you used it in a side to side mount yet?
What if you don't have this type of back on your monitor which is totally flat with the one I have now. However, with another monitor, lets say you have these type of 4 revert holes at the back. Do you just drill to attach to arms to place screws in.? Not IT here. Totally foreign to me. For example back of computer HP 21.5" V22 FHD Monitor - see how it's has those 4 revert type holes. - Which I'm thinking of getting.
can we actively set the bottom one on side and pull the top monitor in bottom at eye level...I am trying to setup a untrawide with a 2k gaming monitor stacked on top for my Gaming + Coding setup, so when I wanna play games I want to set aside the Ultrawide and pull the gaming monitor to eye level to play games...
wish I wouldve watched this first. I think I need a cheaper basic one. I want the opposite, I want the bottom screen to be all the way down to the desk. Doesnt seem possible with this mount
Doesnt that strain your neck or is that simply a thing we get used to? Man it does look super nice! If i ever get a second monitor, ill buy one without a stand and get one of these arms. They llok super nice!
Great review, James! Can you recommend a mount like this (stacking) that could support a bit more weight (22+ lbs)? I'm looking for a solution to stack Apple Thunderbolt Displays.
Hey James thx for a awesome video. i was wondering how far it can go out.. I have a okay wide desk, and i like to have it a bit close when i game.. Thx
you beaut! I'm so fussy when it comes to stuff like this. They look sturdy enough to hold two different sized monitors, I have a 24/26" and a 30/32". Will the bigger monitor hold? Thank you
Can u tell me how I get the top 1 to not move? I’ve tried everything. I’m stacking mine like yours in the video & they’re both 32” & the bottom Monitor I’m having it touch my mousepad & tilt outward some & the other on top but the arm drops. I’d appreciate the help.
it's good stand but the width of the base is not durable, it should have been more wider and solid. I could see in the video that with two monitor on, the base was shaking, and wasn't giving solid and stable look.
@@jcunboxing It should be possible to use another one for the other 2 monitors right?. I'm thinking of buying two of these to set up 4 monitors, rather than buying a 4 monitor arm because 4 monitor arms can not extend out and move around.
@@jcunboxing Thanks. I'm afraid that my desk will topple over if I have 4 monitors especially if they are all positioned at the back of the desk. What are your thoughts? ALso I'm going to buy an electric standing desk, so I'm even more afraid of it toppling when moving the desk up and down .
hi , great video!! im a tall guy so if i want my bottom monitor at eye level i need the bottom of it about 12 inches off the desk. i use a 27inch acer to game and a smaller monitor 24 inch for chat on my stream. do you think i would be able to keep the 11 inch gap using these arms whilst being in a stacked configuration? thanks
Thanks for choosing AVLT! 👍
Probably not. I don't think it would take the weight/size.
@Himezz it’s only rated 13 inches up to 32 inches.
@Himezz but I don’t see why the extra 2 inches would make a difference.
oh man I think this is the stand I want! I want "unlimited" movement top stack and side by side options
Life saving review; this was exactly what i was looking for.
Appreciate the amount of detail and effort you put into this :) cheers mate
Glad it was helpful!
Well that was dope. Thank you sir, this was just the information I was looking for.
Good job! Just watching this video saved me 75 bucks! I installed it myself!
Glad you found it helpful!! :)
Thank ypu man, this was just what I was looking for. Great review video.
great video. i was looking for a good, honest review before i thought about buying this, and im sold.
Dude needed this thanks for the review I searched so many. I also used your link from Amazon to purchase it. Thanks again.
Thanks for the support!!
Thanks heaps man, great guide
Good day.. I just watched your 4 recent videos because i didnt watched it yet and i really love your great content with great products to reviewed.. I really appreciate for giving the timecodes in the description below.
You really deserve more for your effort and being honest in your reviews. So helpful and informative..
Hope you'll make a video about Top 3 brand in every product quarterly so it will be our guide.. Thanks and more power to you. Keep safe and God bless.
Thanks!!! Glad you're liking the new content :D
@@jcunboxing Yes we really love it.. Looking forward for more videos.. 😊
Very thorough and clean explanation. Well thought out
The models in this are Dell Ultrasharp U2419H (bottom) and the older version U2417H (top)
Thanks a bunch for this video, the exact stand I was looking for, for the same reasons you mentioned!
Thanks mate! Hope to see this video sooner! Also, I just bought it and I don't know how long it takes to reach Melbourne, AU. This is very informative and well explained about monitor arm I've ever seen! Great job!
excellent review, detailed but to the point
Wish these same pair came in black
we will watch your career with great interest ;)
Haha nice reference there ;) Thanks!
Nice i am buying it
Awesome video!
Really great video.
Great video! Thanks
Good tutorial mate, looks smart and clean! Great setup!
Bro can you put the lower monitor flat to table surface 45° or 70° and top monitor as flat to wall .... I want to see this set up and also how it looks when we add 2 more monitors in the same configuration and all screens be flat and not curved the size can be 27 inch but i would like 32inch 4 screen set up ... I would love to see a photo in community post if you can do this set up
Great video. I'm like you and need a mount that provides enough space below the bottom monitor for speakers to sit under. Thanks for the suggestion.
It is currently not available on amazon and I am sad :(
looks good in theory but need a longer mounting pole.
Yea would be good for a lot of people. But I think it is hard to find longer ones that are gas spring. Most longer ones are fixed and don't extend out.
great review btw, gained a sub
I wish there were easy options to reinforce desks for gromet style installations.
Can I have one directly in the middle the the other off to the side on the same height
I have two 27" monitors and this exact stand came up when I researched which I should choose. is this a good buy then?
Seems I'm too late to the party as the product apparently is not available anymore.
Nonetheless, you did a very good job reviewing this monitor arm.
(I actually came here form the Ergotron LX Dual Monitor Arm, which is the only other alternative for two 34" Monitors I've found so far that allows horizontal and vertical alignment.
Can we do landscape both montior position with this arms?
Tnx a lot!!!
This is actually exactly what I was looking for as well. Too bad it's so expensive.
The monitor arm is very convenient. I also use dual monitor arms. The top of the desk is very clean. The video was very interesting! With love from Japan :)
could you take the arms off an put onto a taller pole or no
i need this now
Could you provide me with the measurement for the clamp beneath the desk? As in, after it is mounted, what is the distance between the bottom of the desk top and the bottom of the screw for the clamp. Thank you!
If you don't remove it, you can't rotate it yes?
WOw that brand really is not expensive, im not sure what the quality is. But i just found one for a single monitor which also can rotate for just $39 us thats pretty nice!
P{S notice attention to detail. They numered and lettered the bags. This is really a guidance for dummies, super nice!
Holy crap dude!!! 4 monuitors.... bizarre! I already go crazy sometimes having two
So did you make that video :) i see you got 6k already
This would be perfect but not sure if i wanna spend over $100 on a monitor arm, I get there is a difference in quality. Would a $47 one work well still??? This one def has more movement to it.
hello to anyone who could answer, would you recommend using the grommet mount on dual stack monitor? there is a hole for mounting a grommet pole arm on my desk and it is located near the left side of my table, i have noticed that there is a slight bend due to the weight of the two 24 inch monitors installed. do you think it's better to just have it mounted at the center of the table using the c clamp instead? thanks!
I want to stack with 32' monitors (16.9 height). Do you think this could do it comfortably without having to over angle the bottom or top monitor?
How hard is it to lift both monitors up? I have electric desk and when I stand up, I need monitor to be higher than usually. I also lift my desk higher when I am eating and then I usually have to adjust the monitor. Stacked monitors is probably making this process slower.
Hey mate! Just wanted to ask do you still use this monitor arm 2 years later and what is your updated short review
And have you used it in a side to side mount yet?
Very late reply but yes I still use it in the configuration you see. I don't use it side by side.
whats up with the lotion next to the desk set up?
This is what I am looking for wow cool
I want this exact monitor mount but they sold out any other recommended mount exactly the same full adjustable
This is the only one that I've managed to find that adjusts this well and stacks.
Unfortunately this is unavailable on the amazon website. Do you know if there is an alternative?
Sorry, no.
@@jcunboxing no worries. thanks.
i need this ive been looking for months but it doesnt ship to europe sadly
Did you review rotating the arms. Making the screens rotate from landscape to portrait?
I am trying to stack 2 LG49 inch ultra wide monitor on top of each other. Do you know which monitor arm is suitable for my intended set up?
What if you don't have this type of back on your monitor which is totally flat with the one I have now. However, with another monitor, lets say you have these type of 4 revert holes at the back. Do you just drill to attach to arms to place screws in.? Not IT here. Totally foreign to me. For example back of computer HP 21.5" V22 FHD Monitor - see how it's has those 4 revert type holes. - Which I'm thinking of getting.
can we actively set the bottom one on side and pull the top monitor in bottom at eye level...I am trying to setup a untrawide with a 2k gaming monitor stacked on top for my Gaming + Coding setup, so when I wanna play games I want to set aside the Ultrawide and pull the gaming monitor to eye level to play games...
Sorry, not sure as it depends on the size of your monitors. Best to contact the company directly
wish I wouldve watched this first. I think I need a cheaper basic one. I want the opposite, I want the bottom screen to be all the way down to the desk. Doesnt seem possible with this mount
Doesnt that strain your neck or is that simply a thing we get used to? Man it does look super nice! If i ever get a second monitor, ill buy one without a stand and get one of these arms. They llok super nice!
Thanks for the review mate, Do you know how these compare to the North Bayou vairant - H180 ? I'm looking to stack 2 x 27".
oh they're 24" monitors. I thought maybe 27" and had my hopes up for my 2x 32"!
Maybe not.
Can I put a 34” curve monitor at the bottom and 24” monitors at the top…will these monitor arms work?
I wanna stack a «34 bottom and «27 up top is this good? Or should i look for something Else
Can you move top to bottom & vise versa? (Gaming vs editing panels).
monitor arm clamp diameter?
Is that mount sturdy enough to have both monitors offset to one side or the other? So that the pole would be on the side of the monitors?
Will this fit 2 27 inch monitors stacked
Can you swap the positions of the monitor? (Left monitor -> right side, right monitor -> left side?)
Great review, James! Can you recommend a mount like this (stacking) that could support a bit more weight (22+ lbs)? I'm looking for a solution to stack Apple Thunderbolt Displays.
Hey James thx for a awesome video. i was wondering how far it can go out.. I have a okay wide desk, and i like to have it a bit close when i game.. Thx
you beaut! I'm so fussy when it comes to stuff like this. They look sturdy enough to hold two different sized monitors, I have a 24/26" and a 30/32". Will the bigger monitor hold? Thank you
I think it comes down to the weight and just check if it's within manufacturer tolerance.
does the arms work for 34 inch monitors as well?
Can u tell me how I get the top 1 to not move? I’ve tried everything. I’m stacking mine like yours in the video & they’re both 32” & the bottom Monitor I’m having it touch my mousepad & tilt outward some & the other on top but the arm drops. I’d appreciate the help.
Need to adjust the tension for the arm and make sure the weight is within the tolerance outlined by the manufacturer
@@jcunboxing I got it fixed. TY! So n the US the tension is written to turn Left to + but turn counter clockwise, totally crazy 😜
Would this worked in a stacked config with x2 34in Ultrawide monitors?
What is the max monitor width in side by side setup? Can it support two 32” monitor side by side? For example, two dell U3219Q monitors.
Is this gone limp now or standing strong?
Strong 💪
What is the stand your using for your curved monitors? Thanks
What monitors do you use
Dell U2417H and U2419H
@@jcunboxing damn that was fast. How much for each. I just don’t wanna get the wrong one
Well they have newer models now. But pricing depends on where you live. I got the U2419H for around $300 AUD.
What monitor do u have?
it's good stand but the width of the base is not durable, it should have been more wider and solid. I could see in the video that with two monitor on, the base was shaking, and wasn't giving solid and stable look.
not sure if.this is going to jandle a 49inch where most 49inch weighs 10kg+
What mount did you use for your 2 main/middle monitors?
So do you have 2 of these arms to set up 4 monitors?
Nah I'm only using one of these to set up 2 monitors as you can see at the end.
@@jcunboxing It should be possible to use another one for the other 2 monitors right?. I'm thinking of buying two of these to set up 4 monitors, rather than buying a 4 monitor arm because 4 monitor arms can not extend out and move around.
Oh yea for sure. Just make sure the monitors you're using are all within the max weight and size.
@@jcunboxing Thanks. I'm afraid that my desk will topple over if I have 4 monitors especially if they are all positioned at the back of the desk. What are your thoughts? ALso I'm going to buy an electric standing desk, so I'm even more afraid of it toppling when moving the desk up and down .
The height seems perfect for me, bit higher than the NB H180. But this one doesn't seem to be in stock anywhere. Anyone has a link?
Is there a cheaper option that can provide this much rotation and stuff?
Not that I have found.
Can this work with 3 monitor set up by adding additional arm?
Nah I don't think so
Does it come with the monitors or not
Nope
Will i be able to use a touch screen for bottom screen and set it up so it reaches my hands?
Hi, Can i put a 21:9 34" monitor on the left and next to it a 16:9 27"?
Probably not.
Welp can’t find it anywhere...can someone help me and if you find it or one that’s really close to this send it to me plz.
Can this monitor fit a 43 inch & 34 inch Samsung monitor at the same time?
Hmmm hard to say, I'm gonna guess no...
Do you have any thoughts on a stacking arm that would be good for 34" ultra wides?
Probably not, I don't think it'll fair too well handling all that weight
hi , great video!! im a tall guy so if i want my bottom monitor at eye level i need the bottom of it about 12 inches off the desk. i use a 27inch acer to game and a smaller monitor 24 inch for chat on my stream. do you think i would be able to keep the 11 inch gap using these arms whilst being in a stacked configuration? thanks
Very, very unlikely with that size monitor. As you can see with my smaller 24inches, it's no where near 12" off the desk.
@@jcunboxing thanks, ill keep looking
neck pain?
any wobble while using keyboard, etc?
Nope! But I think that comes down more to your desk stability.
Monitor model?
Top - Dell U2417H
Bottom - Dell U2419H
just came here to leave a like,,
it's out of stock though... :(
That intro killed my ears..
instructions, you burn them, make it up as you go along :-)
For thjose interested, the link to his setup :)
ruclips.net/video/msvEmpcmAHw/видео.html
100th comment