You're certainly right about the new filaments opening a lot of doors and opportunities for makers. It's blowing my mind. Can't wait to see what people come up with next. There are so many uses.
Well it is absolutely fine if your parents migrated to Sweden, say from Turkey, and now you are a Sweden citizen with Turkish accent, never be shy saying your very original country.. and great job with your work, I love all of your work
Great video. I modified my OG Ender3 to print flexible stuff, and it's incredible. I printed some grommets for my car, the old ones were allowing my air filter box to vibrate because they were worn out... with the new ones it doesn't shake at all.
Really, really nice, man. I made a dremel tool a few time ago and I can easily see myself printing a handle for it with that elastic filament. Really great.
Hey there !!!, love the vids !!!, I've been watching you and another channel for my information. I gotta say, your humor as wacky as it is keeps me coming back. It's learn and laugh which makes just a touch above the other guy I watch. I am getting my first printer this week ... I went with the cr-10, after careful consideration. Thanks for the great vids and laughs
I printed some feet for my gas 6K generator. It sat on the back deck and would send vibrations through the wood into the floors of the house. Add some 4 x 5 in feet zip tied on and it reduced the vibration by 60% or more.
Hey man, I am excited to see your anet a8 in the video, I am turning mine into a corexy style machine..... getting a little too obsessed with these printers! having way to much fun.
Spotted another unique super genius. intj,enfj,enfp,infp quad,,,, Quad abstract thinking here. Cross between intj and enfj mbti most likely personalty type on this one. Enfj would add more sensing ability to an intj while the intj adds abstract thinking to Enfj.
I think I'll print some flexible bumpers for my personal electric vehicles. I'll have to find what filament is both impact resistant and abrasion resistant, as I think those are the two main risks (also, it should be fairly slippery, as it is often preferred to slide rather than abruptly stop during a collision.
Image using the elastic filament, for something like a phone case for a cheap phone like, a phone from a dealer like, metro. Having a back to the case, would help, especially if it's dropped off a table or a desk. I would use it for that, going with a design that had some grip to it.
Speshial yeah here is a link to one www.amazon.com/dp/B01FL49VZE/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=corridigit-20&linkId=f7b4505f5f72b686422ee123a378c38a
you should combine them both and put the really flexible one on the inside of the RC bumper as a hex paten to absorb the energy and the stiffer one on the outside
Neat. I actually have both of those same printers. I haven't actually got my tevo tarantula to work yet, I think the nozzle is clogged, but it's cool to see them being used rather than the super expensive printers
#1 pro tip for printing with flexibles, even with a bowden: run ptfe tube all the way in between the extruder gear and idler, with the tip cut in a wedge shape to fit snug against them.
Great review of what we can expect for a flexible filament and the application we can make out of it! I'm curious about the wood filament did you already try out ? If yes is it possible to print with this kind of material with an anet A8 or a tevo tarantula printer?
+RCLifeOn wow great video lots of useful information ;) i have one question for you tho.. could you link me the vibration dampeners on thingivers and if you have created it yourself could you please share it with us?? it would be awesome. I'm planning to use this for my anet a8 bowden setup since right now I'm using some plastic foam as dampeners. loving the videos man keep up the good work ;)
Hello. You could choose on tevos aliexpress site that the printer could print flexible filament but you have to pay 30 40 euros more. So you need that actualy to pring flexible filament? Or can you just print with the stock version of 180 euros?
What if you make a shock absorbant case with notches that allow a plate harder makerial to latch to it as a kindof duel shock absorber. I haven't got very much money atm, but would love to, in the future, do something along those lines.
Hi... How about to explain differences between materials and for what is better recomended : PLA, ABS, Flexible PLA, HIPS, WOOD, PVA, Nylon, Wood-Polymer, eLastic, PCTPE Show us some examples also. ;) And maybe to try to listing each material for one by one of all your printers... if support to print... or what adjustments can do to work each filaments for each printers... of course, if is possible.
Thanks for your video.. always awesome...any chance you can check flexible tpu and if is any good and printable on Tevo Tarantula... Tpu like SainSmart
so i have a question.i have been working on snorkels for people and one common issue that occurs is the valve under the mouth piece breaks or erodes. is it posible to print one of the valves out of that material. also is it possible to use the as-atone bath method to make it smooth?
I like the part where you opened the same box 3 times :)
00:44 so you easily can watch it again and again
gotta get that run time up
You're certainly right about the new filaments opening a lot of doors and opportunities for makers. It's blowing my mind. Can't wait to see what people come up with next. There are so many uses.
3D printer just upgrades its self
It does
@@kalecardenas9645bro replied 4 years later
@@olliefnbr bro replied 2 years later
@@kalecardenas9645 yo man how r u
Rent a 3D printer
Print a 3D printer with the 3D printer
Return the 3D printer
Make more 3D printers with ur new printer
Holy sht ur right
Prusa strategy. But they built the first one, didn't rent. :)
You just copied a comment from the vid we’re someone actually made a 3D printer from a 3D printer
Stonks
Hadi Moussa actually copied from a tweet. I believe that bill Murray tweeted it.
Every time I watch one of your videos, I want a 3d printer more and more!!!!
Creating Creations i bought one because of this channel ;)
Ask your school to buy one
same
@@justicesickles id say your about 360 days late their bud lol
I got one 2 weeks after I watched one of his vids.
Well it is absolutely fine if your parents migrated to Sweden, say from Turkey, and now you are a Sweden citizen with Turkish accent, never be shy saying your very original country.. and great job with your work, I love all of your work
lol are you exposing the dude
your videos are always awesome dude, keep them coming
Yay entligen en bra youtuber som förstår svenska!
Håller med
Great video. I modified my OG Ender3 to print flexible stuff, and it's incredible. I printed some grommets for my car, the old ones were allowing my air filter box to vibrate because they were worn out... with the new ones it doesn't shake at all.
The jawline would definitely shatter any regular old PLA filament. Thanks heavens for Swedish flexible filaments.
The first time I have touched one 3D printed piece of those type of filament, I said : " Wow ! It's like rubber ! I love that ! "
man you deserve more attention your content is high quality
I bought a anet a8 with your code 10 days after starting to see 3D printers on yt
0:45 he made it so he opens that box 3x
fresh bike lol good eye
fresh bike it’s called an unboxing fetish.
He has multiple cameras
you can actually tell by the way he removes the fillament that it's a different take
ruclips.net/video/2x_xwqSDtrI/видео.html
Ok so I am looking to get into 3d printing as a start up side business and this was very informative
U R my favourite youtuber keep it up man
Really, really nice, man. I made a dremel tool a few time ago and I can easily see myself printing a handle for it with that elastic filament. Really great.
Your english is really good! I love your videos!
I was right haha Sweden. I love your videos so cool to see all this innovation.
fan vad härligt med svenska utubers
Hey there !!!, love the vids !!!, I've been watching you and another channel for my information. I gotta say, your humor as wacky as it is keeps me coming back. It's learn and laugh which makes just a touch above the other guy I watch. I am getting my first printer this week ... I went with the cr-10, after careful consideration. Thanks for the great vids and laughs
Awesome, thanks man!
Jäkligt intressant. Bra videos mannen!
Fan va najs att du är från svergie, älskar dina videos mer taratulan då jag tänker köpa en själv
RCLifeOn, I remember when you only had a few hundred subs. You grew so fast!
The epic open door open the box three times montage was great
I actually used it for a computer stand. It worked so well
A monitor stand? Or you could order one from Apple for $999 :D
Wow so cool I didn't know you could print with those Filaments
1 of yur best vids. new topics. side-by-side comparison. peace
Thanks for good tips for using a flexible filament. I hope i use the filament in my works.
Whats your Dream ?
1. Engineering
2.RUclipsr
Nice video !by the way
mine is both!
3
airplane pilot/youtuber
Hacker/3D printer
1
wow this filament is so good to go with
4:32 GoPro HERO 5 black! Congratulations for your new camera!
Hey thanks! Bought it a couple of days ago :)
Me to! Loving it! Love the slow motion! Have a nice day!
DIYowl no it isnt a gopro 5
Awesome! Indeed!! Thanks for sharing!
jätte bra video ännu en gång! :)
you are really good all time dude
Oh thank you so much!
my plasure
Awesome video. Thank you man
Great Video! Thanks
Pretty cool stuff!
I printed some feet for my gas 6K generator. It sat on the back deck and would send vibrations through the wood into the floors of the house. Add some 4 x 5 in feet zip tied on and it reduced the vibration by 60% or more.
Just imagine printing a door handle with that super flexible filament, the eSun stuff. That would be lit.
The techniques are so great
0:41 Way you walked out of the door was so fake, but I like it. lol
Nice shop✊🏽
simon i like ur videos :D
Very good video! thanks
Hey, you can try to print more & custom phone case's. This will be interesting! 😀
will it print on a non heated bed. Thanks and thanks for the video. well done
Good video man
Ur vids are great
that's pretty sweet being able to print a phone case
yes
it could be a business opportunity to print a phone case as a customer desire
Hey man, I am excited to see your anet a8 in the video, I am turning mine into a corexy style machine..... getting a little too obsessed with these printers! having way to much fun.
Jasså! Så du är från Sverige. Jag med!
Spotted another unique super genius. intj,enfj,enfp,infp quad,,,, Quad abstract thinking here. Cross between intj and enfj mbti most likely personalty type on this one. Enfj would add more sensing ability to an intj while the intj adds abstract thinking to Enfj.
Your videos are the best keep the good work going bro but can you tell me how did you learn to build all the rc stuff like drones....
I think I'll print some flexible bumpers for my personal electric vehicles. I'll have to find what filament is both impact resistant and abrasion resistant, as I think those are the two main risks (also, it should be fairly slippery, as it is often preferred to slide rather than abruptly stop during a collision.
Image using the elastic filament, for something like a phone case for a cheap phone like, a phone from a dealer like, metro. Having a back to the case, would help, especially if it's dropped off a table or a desk. I would use it for that, going with a design that had some grip to it.
I like your 3D printer video’s Great
can you do a video on the software side of printing? maybe show us your workflow or compare different slicing softwares?
man I want a 3D printer so bad
Save up the money there are 3D printers that cost just $200 now.
ppdonut there are?...
Speshial yeah here is a link to one www.amazon.com/dp/B01FL49VZE/ref=as_li_ss_tl?ie=UTF8&linkCode=ll1&tag=corridigit-20&linkId=f7b4505f5f72b686422ee123a378c38a
GrodyMaroon I'm probably gunna get the tarantula
diego ramos the anet a8 is cheapest on gearbest. I have one myself.
The european links are broken. Thank you for testing out the filaments and sharing with us.
you should combine them both and put the really flexible one on the inside of the RC bumper as a hex paten to absorb the energy and the stiffer one on the outside
Neat. I actually have both of those same printers. I haven't actually got my tevo tarantula to work yet, I think the nozzle is clogged, but it's cool to see them being used rather than the super expensive printers
Maybe can you use the second filament do make basquetebol airless ?
witch printer should I buy as my first 3d printer
#1 pro tip for printing with flexibles, even with a bowden: run ptfe tube all the way in between the extruder gear and idler, with the tip cut in a wedge shape to fit snug against them.
Can u make a video on 3d printing, fusion 360, how to print etc... Pls
I'm about to give Nylon a try wish me luck 😉 (ender 3 pro)
Success or fail?
Result?
Bra video 👍
Sweden??? sounded like a New York accent to me... hahaha.. kidding.. thanks for the info.. Great vidsss
Great review of what we can expect for a flexible filament and the application we can make out of it!
I'm curious about the wood filament did you already try out ? If yes is it possible to print with this kind of material with an anet A8 or a tevo tarantula printer?
Hey thanks! I have not tried the wood filament, though I think both printers would be able to print the filament with no problem.
+RCLifeOn wow great video lots of useful information ;)
i have one question for you tho..
could you link me the vibration dampeners on thingivers and if you have created it yourself could you please share it with us?? it would be awesome. I'm planning to use this for my anet a8 bowden setup since right now I'm using some plastic foam as dampeners.
loving the videos man keep up the good work ;)
How do you get the tube guild thing into the 3d print? Did you have to make threads or just tough it in there
Hello. You could choose on tevos aliexpress site that the printer could print flexible filament but you have to pay 30 40 euros more. So you need that actualy to pring flexible filament? Or can you just print with the stock version of 180 euros?
my dad has a 3d printer just like yours. great nerds think alike :)
REALLY GOOD FILAMENT YOU CAN DO PHONE CASE ETC.
220 for extruder and 80 for bed?
What if you make a shock absorbant case with notches that allow a plate harder makerial to latch to it as a kindof duel shock absorber. I haven't got very much money atm, but would love to, in the future, do something along those lines.
0:41that's some nice blush makeup you got on there (;
lol his cheeks were quite rosie
@@ericatyler3787 ikr he smuged it a little
Hi...
How about to explain differences between materials and for what is better recomended : PLA, ABS, Flexible PLA, HIPS, WOOD, PVA, Nylon, Wood-Polymer, eLastic, PCTPE
Show us some examples also. ;)
And maybe to try to listing each material for one by one of all your printers... if support to print... or what adjustments can do to work each filaments for each printers... of course, if is possible.
I think you should print out a test dummy to make the crash test more believable
Tony Rios ?????
Excellent video, what computer cad program is that?
0:06 found that on grabcad as well I see
You are great bro
What kind of action camera was that? It looked interesting
What cad does this guy use?
Thanks for your video.. always awesome...any chance you can check flexible tpu and if is any good and printable on Tevo Tarantula... Tpu like SainSmart
so i have a question.i have been working on snorkels for people and one common issue that occurs is the valve under the mouth piece breaks or erodes. is it posible to print one of the valves out of that material. also is it possible to use the as-atone bath method to make it smooth?
What are the Slicer setting for Flexiable PLA, Temp, speed, bed temp, retraction and so on? I am using a Persia I2 mk2
3d printer is awesome
😎😎😎😎😎😎
What program do you use for your 3d renders and communication to the printer? Interested in making parts! Thank you!
Is the filament stretchy. ? Can I print a hollow object and inflate it with air. ? or is it just flexible..
What was the attachment for the cooling fan you had on your Anet A8? How would i get one? Thank you!
awsome bro
are these food safe? Since one of the big things with silicon as a material is that they're often used for kitchen and medical stuff.
😱😱
You are using the ip5?
Is there any special hot end needed to be able to print with this elastic material? I might just get an anycubic kossel and try it!
Could you please add a guide for adding multi extrusion/filament mod to the tarantula.
Maybe even a triple filament extruder! If that is even possible.
Proud that fila flex was developed by a spanish guy
Is that the 7 camera angle filament unboxing?
BRODER!!!