That ZR1 is a damn nasty beautiful car. Great job guy's. Really impressive. Keep up the great work. Fran get rhat motor together, should be scary. Thanks for the video..
Well worth the wait. The way those first few pulls were edited had me thinking: "1,000 for sure.". Amazing work Eric. Cornfed is going to love this setup.
Nothing like a blower with both pulleys. Absolutely woke up my SC’s midrange and power up top - pulls very hard. That Kong is a great setup - wish I could get it on my Toyota with an RPM fuel system/tune.
I'm really sorry Steve, I didn't remember your name, I had to go watch a couple of the older videos to remember your name bro I'm sorry I didn't mean that . Keep up with the great work guys (Fab 5) building America horsepower
@@soundmman1516 damn thats awesome man! Glad to hear it turned out well 👌. Your zr1 makes my c6z06 H/C/I look like a little scooter haha, it's enough for me though! I can't imagine adding another 350whp lol
@@biggiesmalls7939 Even though the C6 ZR1 is “more car”, I think the C6 ZO6 is a “better” car. Once the valve issue is taken care of it’s much more Fun to drive being so lightweight! Gotta love them Both!
I was just about to say Fran's going to say he misses his ZR1. Low and behold that's exactly what happens. He will absolutely need a 2650 on his new build. That thing will be a monster. It will need to be renamed the Kraken because it will only come out when absolutely necessary.
@raceprovenmotorsports Whats the "Cam specs" for this c6zr1 2650 supercharger Build? Really would like to know the Lobe separation at least please?? 🙏🤔👋🏼🇺🇸
Bra,I dont mean to sound arrogant but why would a NA Z06 making 600+ hp to the rear tires surprise you? These LS motors are pretty much race engines from the factory, they respond really well to the slightest modification!!!
RaceProvenMotorsports Not saying anything bad about corvettes but it gets kinda dull you know.They all seem to get the same set of mods done with little changes here and there.
@@Drizzit57 👀 really? Your watching to learn about engine tuning here? Lol. It's the same situation in every RPM video I've watched... There's no tuning tips or tricks taught here... No tutorials on how to navigate popular tuning software or ecu's.
RaceProvenMotorsports I know you don’t list them as a mod. I was watching as he put the head on with a head bolt that’s why I asked. Keep up the good work. Zr1 made killer power
RaceProvenMotorsports yes for just a heads cam head bolts are fine. I agree with you. We only install head studs if our customer wants to run over 15+ psi. It’s little insurance for us I case they do something stupid
I was about to leave a nasty Yelp review like the male Karen I am, but then I got the notification. This was bad ass, now I want to see Fran build his. lol Also, do you give free advice? JOKING!!!!!
Okay, I've got to ask. It seems at least half of the C6s I see on the channel have those C6 ZR1 wheels in the graphite finish (whether they're a ZR1, Z06 or whatever). I live in Florida where, it seems, every third car is a Corvette and I've NEVER seen those wheels down here. I don't even see them on cars on other channels. Are you guys giving them away with the purchase of heads and cam, or what? ;-)
They're GM wheels, the color is competition gray. Most 20 spokes you see are chrome, with silver and comp gray being less common. The Z06 w/ Z07 package came with the comp grays too
@@cornfed_zed7327 I had competition gray wheels on my second Z06 but they were almost flat black. My current one is Cyber Gray Metallic so I've got Gloss Black wheels on it. Down here in Florida C6 and C7 Corvettes go: 5% polished or chrome wheels, 95% black wheels. Pretty much never see silver or gray paint. Maybe a regional thing? Cheers.
Blower.. check......416.....check 112mm tb...check.....Prc 260 heads.... check....full build check.....I want that lid but have not seen it for the LSA 2650......going in a SS sedan
@@prom8332 Yeah the c7 taillights are definitely a little out there, the c8s are the same. The c6 taillights look more realistic, like an actual production car taillight and not incomplete concept.
@@kiddt1999 I'm not saying the c7s are ugly cars because they're not. If I could afford to have 6th and 7th generation corvette I would. But if given choice between the 2 I'll take a c6.
I have no car rnow because I totaled my 5.0 so I'm debating on getting a c6 vette or c7 but cant decide because I can get a ls3 vette for 17k or a c7 for 35k. Ughh
That ZR1 is a damn nasty beautiful car. Great job guy's. Really impressive.
Keep up the great work. Fran get rhat motor together, should be scary.
Thanks for the video..
Well worth the wait. The way those first few pulls were edited had me thinking: "1,000 for sure.". Amazing work Eric. Cornfed is going to love this setup.
Ive been waiting on this one all day!
I agree....never clicked so fast when the notification came in...Just Love Love Love this build. 1000bhp WOW! On stock bottom end!
I’m almost positive it’s 1k to the tire.
I’m sure Fran will get his ZR1 to that power.....plus some.... that’s a badass car you guy built. Nice work
That ZR1 is crazy its like it wants to pull those straps out thats one hella setup RPM!!!
Probably the sexiest Vette I ever saw! Been looking at z06s for past few months and hoping to find the right one. Props on this Beautiful Beast! ☮️
@Matthew Wood did you end up finding one ? Prices went up a little after you posted this comment, so hopefully you got a deal !
I showed this video to my dad. I've never seen a man in his 60's drool so much.
Don’t go to the stroke ward...
Guys seem super enthusiastic!
ZR1 is BEAUTIFUL!
Wow I love it that ZR1 is bad ass 👍🏾👌🏾😍
never clicked a notification so fast!
Nothing like a blower with both pulleys. Absolutely woke up my SC’s midrange and power up top - pulls very hard. That Kong is a great setup - wish I could get it on my Toyota with an RPM fuel system/tune.
Dream car goals 😍
Eric you kicked ass on that one !
Fran, Matt , Eric and Bill keep up with the great work!!💪🏻👍🤘
Robert Werner screw you too lol
I'm really sorry Steve, I didn't remember your name, I had to go watch a couple of the older videos to remember your name bro I'm sorry I didn't mean that . Keep up with the great work guys (Fab 5) building America horsepower
Steve #1
Hot Damn, that ZR1 is impressive! 😎
😍😍😍 wow damn that thing is sick!!! All nice cars boys. Good work. The tuner does the magic though!!
Fran needs to build his zr1 and race Midnight Performance 🙏🙏 that'd be one for the ages .
GONALRN VS PULLUP
Manuel Gomez isnt running the LS9 anymore unfortunately. Wouldve been sick to see both LS9's built go at it rather than a built 5.3 vs LS9
FINALLY!!! Been waiting a while to see that thing dyno. :)
Nice job guys! Really enjoyed this one!
I live South east Michigan and yes it’s fucking cold asf out rn
This video is why a KONG 2650 is currently being installed on my 2010 ZR1 at Dedicated Motorsports in Weatherford, Texas!
How did it turn out?!
@@biggiesmalls7939 Great! 913rwhp on the hub dyno at Dedicated Motorsports! You can see the video on their Facebook profile titled “Kirk Buckels ZR1”!
@@soundmman1516 damn thats awesome man! Glad to hear it turned out well 👌.
Your zr1 makes my c6z06 H/C/I look like a little scooter haha, it's enough for me though!
I can't imagine adding another 350whp lol
@@biggiesmalls7939 Even though the C6 ZR1 is “more car”, I think the C6 ZO6 is a “better” car. Once the valve issue is taken care of it’s much more Fun to drive being so lightweight! Gotta love them Both!
That’s alot of boost for a stock short block, what a beast though!! Beautiful build! Love the C6zr1!!
It's all in the tune,tuning becomes so important at these levels along with plenty of fuel!!!
Joey's V setup is what I want to eventually have in my 5th gen... one day.
I was just about to say Fran's going to say he misses his ZR1. Low and behold that's exactly what happens. He will absolutely need a 2650 on his new build. That thing will be a monster. It will need to be renamed the Kraken because it will only come out when absolutely necessary.
What were the intake temps with that brick?
Just put the Zr1 back together Fran you know you want to. Just do it!!
What a great car 😘 big love and hugs 🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰🥰 to you all guys and keep it up 👍 good luck 👍 best wishes from saudi Arabia 🇸🇦
I want a damn ZR1!!!!!!
How much did the CTSv make with the same blower and a built bottom end? I honestly don’t remember.
This is an amazing car
Might be a stupid question but how would this ZR1 fair on a circuit track? Overheating issues or run all day type?
I'm curious why the KONG 2650 system isn''t compatiable to install on a c6 Gran sport?
They are only made for LSA and LS9
i swear when i get mine im getting this same setup
@raceprovenmotorsports Whats the "Cam specs" for this c6zr1 2650 supercharger Build? Really would like to know the Lobe separation at least please?? 🙏🤔👋🏼🇺🇸
You guys are the best
@3:42 Steve’s laughter sounded like one of the Ed’s from Ed, Edd and Eddy! 😂😂😂
The best fucking cartoon ever yo !
Mr. TAMW i know!!! My favorite!!!
The ZR1 is spicy!
Been waiting all damn day lol
Finally Steve......thought you might have gone skiing again 🚫⛷
stink nyc was gone for a week and you wouldn’t have even noticed :p
Probably colder in Michigan, ya like 23 degrees today. 3 months before we run out cars on the track.
Whatever happened to the blue cts-v with the 2650?? No dyno #'s?
Guys what spark plug for a head cam c6 z06? I tried tr6 and felt down on power from the tr5. Thinking spark tables are off or something
Either is fine.
Can you tune a GM 3.6 L to get a little more power?!? 😂 just wondering!
How do you even use that power anyway. I have a stock ls3 with some bolt ons and spin in 1st and 2nd
You need a smaller wheel and more tire.
How much power can a stock zr1 safely hold?
Was that red ZO6 N/A pushing 636 to the wheels? If so that is amazing to me.
Well it’s not an engine dyno so yes lol
Bra,I dont mean to sound arrogant but why would a NA Z06 making 600+ hp to the rear tires surprise you? These LS motors are pretty much race engines from the factory, they respond really well to the slightest modification!!!
What tires do you guys recommend when keeping the factory rims on the back to handle all the added power? Thanks
With that kinda power.... a 15"conversion is definitely on the list
@@Carportracingboyz world record ZR1 stock car went 8’s on 17’s.
Stick car*
What trunion upgrade you guys use in that red z? im about to do mine and am deciding between comp and che
Mike Minervini Brian tooley racing
@@markmayer948 ohhh shoot I didn't realize they made one..thanks!
Is this shop located in Indiana?Great job on the ZR1!!!!
No Delaware
... ... ... if I get the money I want that black ZR1. Like I really REALLY want it!
Will the 2650 wrk with the LS3?
What does that zr1 package cost? And what's the turn around time? Gotta ship from out west
Please email the shop sales@raceprovenmotorsports.net
Good Stuff....One Day!!!
Feel like the high flow cats add torque to these cars instead of straight pipes with 20 less wtq and they make the same whp some how
more to do with the clutch
Is that duct protection film you guys use for the car fenders? Fellow shop owner here asking
raceprovenmotorsports.com/products/blue-fender-wrap-24-x-200?_pos=1&_sid=e3e48030f&_ss=r
Fran for President!
um europe drives on the same side as the US only the UK is right hand drive!?
What hp of thay car bro?
It's a team effort...however...smirk.
Any stock lt takeoff blowers for sale?
So they do anything other than corvettes?
Feel free and look through our other 400+ videos, we do late model GM we just have had a lot of vettes in recently.
RaceProvenMotorsports Not saying anything bad about corvettes but it gets kinda dull you know.They all seem to get the same set of mods done with little changes here and there.
@@Drizzit57 if your bored of vettes there's about a million give or take different channels.
Brent Iaconelli Thank you for sharing information I already know.Did it ever occur to you that maybe I checked out this channel for the tuning?
@@Drizzit57 👀 really? Your watching to learn about engine tuning here? Lol. It's the same situation in every RPM video I've watched... There's no tuning tips or tricks taught here... No tutorials on how to navigate popular tuning software or ecu's.
Where can u get that lid?
From us
I want y'all to build my Camaro as soon as I get it back form the dealership
It’s a stock bottom end which happens to have a 20% stronger aluminum block and everything else is forged. So yes stock for the LS9 but very robust.
man I need a C6 ZR1 in my life like badly
I'll sweep and mop for free just to hear & feel those bad bitches. Great work hopefully I see you guys at any TX2K.
Hey! Did you finish Paul SR’s car?
Joking of course
how about a rundown of the setup in the description and power numbers.
All mods are listed in the video
With the driver mod? 9.20-9.30 @150-155.....
The blue devil Zr1 went 9.5 @ 150 with 820whp - this should be much faster with a driver.
👑
No head studs with those new heads?
Yes of course, we don’t really list them as a “mod”
RaceProvenMotorsports I know you don’t list them as a mod. I was watching as he put the head on with a head bolt that’s why I asked.
Keep up the good work. Zr1 made killer power
For a heads cam C6 Z yes stock bolts are fine, for the Zr1 no it got heads studs.
RaceProvenMotorsports yes for just a heads cam head bolts are fine. I agree with you.
We only install head studs if our customer wants to run over 15+ psi. It’s little insurance for us I case they do something stupid
Wish I worked with you guys!! You make me miss wrenching 😭
Whats up with Matt’s mustang
When will Paul Sr's car be done?
I hope this is a joke
@@RaceProvenMotorsports 😂
Fuck that thing is perfection.
So basically the same engine with the exact same blower will get almost twice the power if properly built and tuned?
Cam, pulleys, 20+ lbs boost, meth, e85, intake, tune, you get the idea
I was about to leave a nasty Yelp review like the male Karen I am, but then I got the notification. This was bad ass, now I want to see Fran build his. lol Also, do you give free advice? JOKING!!!!!
Lmfao KAREN
Okay, I've got to ask. It seems at least half of the C6s I see on the channel have those C6 ZR1 wheels in the graphite finish (whether they're a ZR1, Z06 or whatever). I live in Florida where, it seems, every third car is a Corvette and I've NEVER seen those wheels down here. I don't even see them on cars on other channels. Are you guys giving them away with the purchase of heads and cam, or what? ;-)
They're GM wheels, the color is competition gray. Most 20 spokes you see are chrome, with silver and comp gray being less common. The Z06 w/ Z07 package came with the comp grays too
@@cornfed_zed7327 I had competition gray wheels on my second Z06 but they were almost flat black. My current one is Cyber Gray Metallic so I've got Gloss Black wheels on it. Down here in Florida C6 and C7 Corvettes go: 5% polished or chrome wheels, 95% black wheels. Pretty much never see silver or gray paint. Maybe a regional thing? Cheers.
@@kingbrutusxxvi could be! Best GM color imo
Bad ass dude
If we get you guys to 150k subs fran has to build his zr1🤷♂️🤣🤣
Did you live in Poland for work Steve?
Bryan .Rawls Family moved over when I was younger for my dads work. So sorta
Blower.. check......416.....check 112mm tb...check.....Prc 260 heads.... check....full build check.....I want that lid but have not seen it for the LSA 2650......going in a SS sedan
I want a zr1 now inferno Orange
Love channel
Nice!!
I would like to see this Corvette have a drag race against King Kong the Porsche.
I love it my guys rpm keep up the work and love video and I love zo6 lot💯💯💯💯
He should get the laptop holder that hooks on wheel then he can get rid of belly
I don’t know how to say sorry 🤨
Me 🤣🤣🤣🤣🤣🤣
Fran kinda reminds me of Donald Gibb (Ogre from Revenge of the Nerds).
Steve, a camera dude, tells Eric (an actual mechanic) that yes it needs new pushrods if the heads were milled. Thanks Captain Obvious. 3:07
He didn’t know if the heads were milled some customer opt to not have them milled so then not needing different length pushrods
Yeah I’ve got a c6 that’s got some work done that I road race. It’s not 1000 HP but then again you can’t track a car with that much power lol
@7:14 you call you boss wife a bitch and get away with it lol
Paul Sr. Still has fans!?!?
Videos are ok but the dumb comments and Frans responses are pure entertainment!
I'll take a c6 Corvette over the c8 and c7 any damn day of the week. Just a simpler car than the new ones.
Brian spangler i had the c6 z06 and decided to move up to the c7. I like all the extra tech and power but yeah it was a simpler car.
C6's are great looking, more fun to drive, more comfortable (C7,C8 are cramped), more reliable and have ROUND TAIL LIGHTS!!!
@@prom8332 Yeah the c7 taillights are definitely a little out there, the c8s are the same. The c6 taillights look more realistic, like an actual production car taillight and not incomplete concept.
@@kiddt1999 I'm not saying the c7s are ugly cars because they're not. If I could afford to have 6th and 7th generation corvette I would. But if given choice between the 2 I'll take a c6.
I have no car rnow because I totaled my 5.0 so I'm debating on getting a c6 vette or c7 but cant decide because I can get a ls3 vette for 17k or a c7 for 35k. Ughh
shootout: RPM vs Fathouse Fabrication.make it happen.
Jesteś z polski spoko pozdrowienia z PL