6. How to Structure, Format, and Report SmartPLS Results in a Thesis/Dissertation
HTML-код
- Опубликовано: 23 июн 2021
- How to Report SMART-PLS Results in Thesis/Dissertation. The video discusses in detail how to Structure, Format, and Present SMART-PLS results for a Thesis/Dissertation.
_____________________________
Session referred in the Video
------------------------------------------------
Analyzing Reflective-Reflective Higher-Order Construct
• 2. Reflective-Reflecti...
Analyzing Reflective-Formative Higher-Order Construct
• 3. Reflective-Formativ...
Understanding R-Square, F-Square, and Q-Square
• What is R Square, F Sq...
#SmartPLSReporting #SmartPLSResults #ReportingSMARTPLSResults #PresentingDataAnalysis #DataAnalysis #PhD #MS #BusinessResearch #Academics
You can help novice researchers by providing them a general template for each section or point in the analysis or any particular section. Your efforts are so helpful. Ellah bless you.
Good tip! Thanks for watching.
Very informative and helpful as always. Thankyou so much sir
Thanks. I am glad you liked it
Great video, thank you.
Thank you. I am glad you liked it.
Sir, if we find after collecting data that there is discriminant validity issues between two constructs because both constructs are loaded on the same factor/indicator, that can be checked through principal component analysis. Can we combine two indicators on this basis, because it is validity condition before applying pls- sem.Theoretically they are different according to existing scale, but statistically they are loaded on same indicator
Yes they can be combined. Watch this video.
ruclips.net/video/Vvu1Sntf6fc/видео.html
Thank you Sir for this video. I am glad I found it at the right time. In thesis structure, shouldnt we report model fitness test in the end after reporting structural model?
No need to report model fit. If using consistent pls algorithm, you can report it.
@@researchwithfawad okay thankyou Sir
Great!
Thanks. I am glad you liked it.
Greetings sir for running cfa
If we take a model from study as our base model and while designing questionnaire we take constructs from that base study .
Base study has combined 2-3 scale together for creation of constructs in this case we will cite base study as reference or the original studies from which base study derived constructs .
Thanks for watching. Better to cite both.
Thank you sir for sharing the link to this video of yours...one small request, can I get a pdf or word file used in this video for my reference..?? I would be glad if you would share it.
Also a question not related to to this topic. Is there any standard procedure to measure awareness level abt a concept or a phenomenon among the respondents..?
I am sorry but that wont be possible
Very useful.
Thanks
Sir, I read through literature if Ave is less than 0.5 and composite reliability is grater than 0.7, we can say convergent validity is established. Am I right Sir?
Yes, you are right.
Sir, would you share this pattern with me for knowledge? or whether this pattern is suitable for MS level or we may use it for PHD level?
Pattern is almost same as you used in MS. It is good for Phd.
Thank you Dr. Please can you share a link or paper that has the following Statistics for proper study
Thanks for watching. Please google
Sample PhD Thesis using SmartPLS
Dear Sir, do you have this [Structure, Format, and Report Results in a Thesis/Dissertation] for SPSS instead? I admit I'm quite confused on the arrangement of analysis/report to write first...
You can use the same structure but you will have to perform reliability and validity in SPSS plus the assessment of the hypothesized relationships.
JAK for this video. Kindly wanted to know how to calculate SRMR (Standardised Root Mean Square Residual) in Smartpls 3.0version
Thanks. I am glad you liked it. Please see Model fit in smartpls output. SmartPLS does provide the SRMR.
Hi sir, hope you're doing well :)
I have a question about beta coefficient. Is it okay if it is in negative values? If it is okay, how do you suggest me to explain that in my thesis?
Thanks sir.
You can have -ive values. Do you expect the negative relationship? if not, you will have to identify the possible reasons that could lead to the negative relationship.
Sir my independent variables,9 ( qualities of content) and dependent variable 1(customer engagement) with 99 responses my r2 is coming as 0.13....sir how to improve the r2 value ?
You will need to add more variables to improve R sq.
Thank you, prof. is there a video on how to report analysis for a research paper?
Pleasure. I ma glad to hear that you liked it. Here is. Complete playlist on how to perform reporting
Reporting Data Analysis Results: ruclips.net/p/PLb7vm6tsQ3KumlMZjhIYrgn13naHWeh5j
@@researchwithfawad much appreciated
Sir, for SRMR should we report for Saturated model or estimated model.
Estimated model is the preferred choice
@@researchwithfawad Thank You Sir.
Sir. Can you please give a detailed explanation on how and what to report in thesis using CB-SEM using Amos and mediation analysis
You should report the model fit for both measurement and structural model. Plus reliability and validity for measurement model with hypotheses results for structural model
Hello Sir,I am facing issues of proper reporting of the results of CFA in my study. Please help
What is the issue
hi dr. I want SEM AMOS do you have any video about it, also I want to learn it from the beginning. thanks a lot💥💥💥.
Thanks for your interest. Here is complete AMOS playlist
IBM SPSS AMOS: ruclips.net/p/PLb7vm6tsQ3Kvinj9MFF6wbQFDBdkU1ERP
I would request to make a video on how to prepare objectives of synopsis.studenrs need it . 🙏🙏 Regards
Thanks for the suggestion. Hopefully soon.
Can you please give me the links of the thesis papers that you showed in the video..?
Please drop an email on kh.fawad83@gmail.com
@@researchwithfawad sir I too have sent you a mail today. Kindly reply
Hello sir. I am facing problem with Smartpls license activation. Can you suggest any free activation procedure? Peace
Sorry but there is none. You can however get ine month free license, if you register on their website
Respected Sir,
I request you to please provide the PPTs also so that we can have the key points.
Thanks. I am yet to assemble thwm. You kay refer to my website for lecture notes
researchwithfawad.com/index.php/lp-courses/ibm-spss-amos-lecture-series/
Thank you for this video sir. I am thankful that I found your channel at the very early stage of my PhD.
Sir, i have a question... IS there any difference between Amos software and Smart PLS? And which one you would recommend for SEM?
Thanks. I am glad the videos are helpful. Yes there are a lot of differences. PLS is Variance Based SEM (VB-SEM) while AMOS is Covariance Based SEM (CB-SEM). The estimation methods are different. PLS-SEM doesnt provide detailed fit-indices. But it has a number of other advantages. Like there is no assumption of Normality plus HOC are easy. I personally like AMOS but PLS-SEM is easy and offer many advantages.
@@researchwithfawad okay thank you sir for your early response. I would like to make a request here... Sir, Kindly make videos on AMOS. Your explanations are very apt and easy to understand than any other channel/person .. I would be highly grateful if you consider my request.
Greetings of the day sir
In thesis what need to be reported in pls sem
Measurement model
Structural model ?
Both please
@@researchwithfawad okay sir
Model robustness? it needs to be reported in case of model comparison?
Sir can you please explain how to write results in thesis for simple mediation through AMOS/SEM? Is there any link that you can provide?
How to make a table and interpret those results? Also the diagram is required in it!
Please watch this video
ruclips.net/video/YDZ41DcwZjs/видео.html
Also, here is a complete playlist on reporting results
Reporting Data Analysis Results: ruclips.net/p/PLb7vm6tsQ3KumlMZjhIYrgn13naHWeh5j
Thank you so much! I actually used Process for simple mediation however my supervisor wants me to run the tests again through SEM. She thinks its better this way.
Hello sir
How can we get these thesis. I tried but could not find
Please email me on kh.fawad83@gmail.com
I will share the Samples
Ellah bless you
Ameen. JZK
Great Videos Sir. I request you to please explain AMOS software also. It will help a lot.
Thanks. I am glad you liked it. Here is a complete step by step playlist on SPSS AMOS
IBM SPSS AMOS: ruclips.net/p/PLb7vm6tsQ3Kvinj9MFF6wbQFDBdkU1ERP
@@researchwithfawad Thank You So Much Sir🙏
@@researchwithfawad I want to know one thing more Sir. Can you tell us how can we download PLS and AMOS for free for lifetime?
Dear Sir, when will you release the self-developed Literature Review matrix software together with a tutorial video? Tq
Work is being done. Hope to do it soon.
@@researchwithfawad please put it as top priority. tq.
Sir, please also make video about model fit indices in Smartpls
Thanks. Soon انشاء اللہ
@@researchwithfawad thank you so much
Asalamu alaikum sir
Hope you are doing good
Can u share the result's word file.
I can share a sample, email me on kh.fawad83@gmail.com
My HTMT still red and my cross loading all no issues. Like this how i want to interpret it?
Did you watch that video, i shared in my last comment. Did you delete any data
@Research With Fawad I no delete any data. Because my outer loading all is highest value in their own variables
U have video discussion about the t value and p value in path coefficient and how to interpret it?
This video, although no on SmartPLS but on PLS-SEM may help
ruclips.net/video/Q1KaqLLJbvU/видео.html
Asalam o Alikum sir yeh doc mil skta kiya
Please email me on kh.fawad83@gmail.com
I will share some samples.
No English subtitles?
There will be sub-titles if they are generated by Google.
Fawad you are helping the world. Can I have your email address pls?
Thanks. I am glad you liked the videos. Here is my email
kh.fawad83@gmail.com