What year is this specific model? That's the million dollar question. All the years of make in the description aren't this difficult, I'm sure. I have a 2009 personally; I'll post what it looks like in a following comment. My motor has quit, so I'll see what it looks like and if it makes more sense for a mechanic to replace or if I can do it on my own. You have to weigh both parts cost and what your time is worth.
Just when I thought I'd seen every cheap built product GM had built. I'm a retired certified mechanic, but this kind of manufacturing is the result of the now China Motors Corporation.
I am stumped. My blower quit working. I replaced the control resistor & motor. Check all the fuses and relays they all seem good. I am getting 6 to volts dc where the motor plugs in. What am i missing?
What ever happened to bolting these motors in . This could have bin a 5 min job if it was designed better! Someone had to engineer what once was an easy job to change out of the design . Turns what once was a 5min job into just over an hour. GM should be embarrassed.
My car is dripping water from this blower motor. I checked the sunroof and it’s not coming from there. I don’t know where else it could be coming from. Any help is much appreciated!
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I used a 5/16 drill bit and 8, #8 5/8" sheet metal screws. Youre welcome
my motor didnt come with screws
oh and the far reaching part SUCKS on the back side.
What year is this specific model? That's the million dollar question. All the years of make in the description aren't this difficult, I'm sure. I have a 2009 personally; I'll post what it looks like in a following comment. My motor has quit, so I'll see what it looks like and if it makes more sense for a mechanic to replace or if I can do it on my own. You have to weigh both parts cost and what your time is worth.
You would think its made of gold with all that work. I guess ill deal with the noise until it dies.
How do you know when you have a bad blower motor?
vid helped a bunch, thank you!
Just when I thought I'd seen every cheap built product GM had built. I'm a retired certified mechanic, but this kind of manufacturing is the result of the now China Motors Corporation.
I am stumped. My blower quit working. I replaced the control resistor & motor. Check all the fuses and relays they all seem good. I am getting 6 to volts dc where the motor plugs in. What am i missing?
What ever happened to bolting these motors in . This could have bin a 5 min job if it was designed better! Someone had to engineer what once was an easy job to change out of the design . Turns what once was a 5min job into just over an hour. GM should be embarrassed.
My car is dripping water from this blower motor. I checked the sunroof and it’s not coming from there. I don’t know where else it could be coming from. Any help is much appreciated!
GM knows that most of their newer cars are junk and won’t be collectible, thus the prescribed repairs ensure points deductions at car shows.😂😂😂
What if you break teeth off the fan part
What an asinine design. This is why engineers are hated.
Embarrassing Chevrolet