How to Time a Pfaff 1245-706/47 Sewing Machine - TUTORIAL
HTML-код
- Опубликовано: 29 сен 2015
- ✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
✅Get our courses at: www.cechaflo.com
---------------------------------------------------------------------------------
Some basic knowledge about sewing machines is a MUST for an upholsterer/car trimmer. As I said in former video, 'procedures to tune-up an industrial sewing machine are similar' to what we have studied on our Singer 241-12 sewing machine.
Needless to say that you could save some extra money you would have to pay a technician to do the job...and I do not mean pennies, but above a hundred dollars.
Another trade marks follow the same principles.
I hope you find this information useful!
Cesar 
Авто/Мото
Thank you for posting this video. I have a Pfaff 1245 and your demonstration of how to adjust the timing is much easier to understand than reading the manual!
Sincere thanks. You saved me serious down time. My 1245 now runs considerably better, and I look forward to watching all of your tutorials. My respect and gratitude to you.
Thank you Cechaflo, I timed my Pfaff 545 using your tutorial and now works perfect and smoothly
This was super helpful! I noticed my PFAFF 145 H2 was running a little rough. I did all the basic adjustments before going deeper and no improvement. All it took was a small adjustment to the needle bar and the issue was resolved. She hasn’t stitched this nice in a long while. Thank you so much for creating this video.
Thank you! I forgot how to put the upper thread in my old Pfaff 17473 from 1966. I use it about once a year and to day was that day! You saved my day!! =D
FABULOUS video !!! I've had this Pfaff forever and never had any trouble that I couldn't solve--until yesterday, when I knocked it off it's timing. I don't have time to be without it--so I looked at this video. I'm back in business today because of it !! Thanks so much for posting this !! David (in St.Mary's Bay NL,Canada)
Hello David, I am so glad these videos are useful!
Welcome to this channel anytime!
Canada a great country! My English teacher, and forever friend is Canadian (from British Columbia) We have a friendship for more than 30 years.
Greetings from Mexico!
I learned a great deal from your efforts... thank you so much. May blessings rain down upon you and yourhousehold.
Clear and easy to follow. Pfaff machines are worth every cent.
ruclips.net/video/U3HBXBDDKoo/видео.html
Thanks you saved a lot of folks a lot of money
Thank you so much. It's a transforming experience from the the machine owning me, to me owning the machine! 🤩
Perfection. As always. I am so envious of your knowledge. Thank you once again for sharing it with us. You are the only one willing to share the in depth procedures. So thank you thank you cechaflo. Ps. My boyfriend is starting to get jealous of you. I spend more time watching your videos than with him!! Hahaha!♡♡♡ I told him I'm learning. He said, "You don't even have a sewing machine like that!" Lol. Take care. Hope you guys are staying healthy.♡
Great video, I timed my 145 with your video, and it sews great! Thank You
Since I started watching your tutorials a few weeks ago I have been looking for a walking foot machine. Even used ones are expensive. By diligent searching I was able to buy a neglected, but complete Pfaff 145 H3 for $50.00. Thanks to this video, I was able to disassemble and clean it then time it and it is now working great. Thank you for all your excellent videos!
If doing some maintenance the machines come back to their former glory. Irons last more than us!
A few years ago I bought a leather skiving machine 100 years old abandoned in a corner of a shoemaker'shop.
I knew this ruined machine could recover its former glory and that is why it is now:
ruclips.net/video/fx_XuIHcO50/видео.html
Thanks for watching the videos!
Вы большой молодец!
Хорошо настроили машинку, хотелось бы научиться! Спасибо! Danke schon! Gut arbeit.
This video not only showed me how to fix the timing of my 545, it gave me confidence to take it apart! The way your video is constructed and explained walked me right through the procedure. I didn't have to shlep my machine to the technicians business and wait five days!!! Thank you very much!!! Please, please keep up the great work and make more videos of machine maintenance and repair. The sewing is a learning process but if my machine is down or not working properly, I'm dead in the water. Thank you for taking the time make to make this!!!
Dear friend, I really appreciate your kind comment!
I am glad the video is useful!
Welcome to this channel anytime!
Thank you so much for this video. I've been trying to get rid of the harsh sound on my machine for over a month. Now it's sewing like a dream!
+John Bigsby I'm glad the video was useful for you! ...When the 'hook point' is lightly backwards, hence, 'upper tension' has to be tightened more to get an even lockstitch...so, the thread is too tensioned, and causes the 'annoying harsh sound'.
Thanks for following us on our channel!
Grazie, Maestro!
What a brilliant video this is
This other video is related and it seems more clear.
ruclips.net/video/pQGPdiY6m9U/видео.html
This video just saved my day.... THANK YOU
this video helped (somewhat) me fix my pfaff computerized (ambition essential) machine. thank u!
I like this machine its good for leather ..im formerly service technician of pfaff phil.under zuellig philippines. and stamm intl.
Gracia's a este video e arreglado 3 De mis maquinas
MIL Gracias maestro por compartir y por su tiempo
Excellent tutorial. People who do not understand how it works after watching this should not be screwing around with these great machines. I have a one needle Pfaff 146 (so effectively a 145). When I got it the thread kept breaking. Then a professional told me that it could be that the hook was touching the needle. The needle then gets hot and your thread breaks. Turns out he was right. So I got out my screwdrivers and did most of what you showed in this video. The 50 year old machine has now been running for a couple of years like it is brand new.
Thanks for kind comment!
Great video! I knocked my machine out of timing due to operator error and HATE taking it into a local shop for repairs, they have a week wait. I was able to re-time my machine in about an hour after watching this, it works great now I have a pfaff 145.
+William Simmons Hi William, I 'm so glad that my video was useful for you!!!...thanks so much for this positive comment!!!
This works for a Pfaff 545! Thank you!!!
Thank you so much for this!
This was very helpfull and saved me lots of money to get it fixed (as we only got one service center in the whole country....!). Thanks a lot for taking the time to make this video. It might help others to know, that to align the needle and the hook, I found tiny markings (holes) on each gears to where the hook and the needle meet. They were not easy to find under alle the greasing stuff, but they surely made the timing much easier on my Pfaff 545.
I'm so glad the video is useful! ...Thanks for watching the videos!
Maestro gracias por compartir su conocimiento dios lo bendiga.....solo que yo soy mexicana y no sé hablar inglés...y soy su seguidora
Большое спасибо за ваши уроки! Всегда с удовольствием смотрю!
muito obrigado pela aula, vídeo muito claro, e que bela máquina essa! salutos desde Londrina Brasil, Carlos
Muchas gracias por ver los videos!
Thank you maestro Cesar!!! Unbelievable!!! So helpful!! Bravo!!
another outstanding tutorial!!!! muchisimas gracias por todo que haces!!!
You are welcome to the channel! Happy New Year 2017!
hello Cesar, it was very helpfull for me even my machine is not the same (it is a Pfaff345 H3) with a walking foot.
Your video gave me the good way to put in time this machine and it now sew perfectly.
thank you again, Alain.
I'm glad the video was useful for you!
I have a PFAFF 546 H3 which is a dual needle walking foot, while i was sewing the screws on the large bevel gear underneath came loose so shuttle going nowhere, I spent a lot of frustrating time to no avail to fix the timing, i eventually came to your video which i am grateful for, thanks for the info.
I am glad the video was useful!
Thanks for watching!
awesome job my friend thank you so much because now i will be able to fix my own pfaff 145 sewing machine/ / excellente trabajo amigo e aprendido mucho con este video y ahora podre reparar my propia maquina muchas grasias ,
Me da mucho gusto que los videos sean de utilidad.
Thanks for your video
Check the auto opener, and check the area where the bobbin base meets the underside of the needle plate. The auto opener may be pulling too much - causing the thread to bind up - causing you to add more tension. The bobbin case tension could also be too tight.
great video i have a pfaff 1245 and this will be helpful
+Chris M, I think so, Chris! ...Thanks for watching!
Спасибо (Thank You)
Thank you so much for this wonderful tutorial! I have followed the tutorial but my hook seems to catch or stop at random and I am still unable to keep my machine in time. Do you have any suggestions?
great explanation, thanks!
Thanks for watching!
@@Cechaflo I'm trying to improve my sewing machine, brother LT2-B832-3. The problem is less tight stitches, or even overtight without a balance between the top & bottom threads. In the manual the normal needle size is dpx5, but I will try dpx17 like this video of yours. my question after watching this video: How come the dpx17 needle which is 1.5mm different from dpx5 can make changes to the stitches? "still thinking ... learning ....
Geri Syandra Yusman I only would say if a needle goes down through too deep it would be necessary to place the rotary hook lightly backwards. In other words it would be delayed too much.
The needle should descend down through just enough to a dead point to start the ascending movement (no more than 2 mm) to form the upper thread loop that would be caught by the hook.
Between the needle point and needle eye there is a little belly that should almost rub another belly of lateral wall of rotary hook. This happens precisely at the milimetrical ascending movement. This protruding side helps to stand the thread forming the loop that would immediately caught by the hook point.
Perhaps the needle of your machine is ok and the issue would be that the hook is not catching the loop faster. It could happen the needle is going too deep. Of course, it catches the thread loop and sew, but some failures appear.
Bien explicado felicidades bien maestro
Gracias por la información estaremos pendientes de su canal que contribuye al aprendizaje gracias a su buena voluntad
señor cesar despues de tanto tiempo... y asesoria suya! logre conseguir una maquina triple transporte, como le habia comentado hace mas de un año la situacion economica en mi pais y practicamente todo aqui es cada vez mas dificil (venezuela) pero logre adquirir una PFAFF 145, segun lei es la version antigua de esta maquina! seguire observando sus videos para aprender como en si.... se usa y se le hace servicio y mantenimiento!
neoholland que bueno aprender este oficio
Thank you! Got the bigger picture
Thanks for watching!
i recently change the belt just put in and didnt have to check feed timing or top dead centre easy fit and go
Hi Sir,Nicely executed I love it when it moves all in sink it must be a good feeling. If you ever get the chance and you are willing to show,could you film setting the timing on a machine when it has two bobbing cases either side of each other please.
+wow dude I'd like to.
hola Cesar gracias por leerme y contestarme tan pronto hoy en estos momentos te estoy viendo con el tema del
mantenimiento, calibrado y puesta a punto de tus maquinas de coser,y es como si yo me estaria viendo en un espejo clavadito,todo igual, creo que llevas años el oficio ¿40? no se ya me diras pero se ve que eres de la vieja escuela saludos cordiales " ARTISTA"
The spec for needle bar height to hook timing is 1mm above needle eye for the 47. Do you get better performance with middle of scarf?
super
I love pfaff machine
Thanks for watching the video!
Fantastic knowledge you teach, and brilliant ,camera work, thank you both,
Do you have any tutorials on the 45k1 singer and the 132k6 as I use both but each with there own issues,
I also would like to know is there any tricks to stop my two machines leaving upper dog feed and lower foot marks on the leather,
I have never had those Singer machines you are mentioning. After watching and reading some information I have realized they are very powerful, heavy duty sewing machines. Regarding your question my opinion is the feed dog and presser foot teeth leave marks on the leather material because the pressure spring is too tightened. Loosen it a little bit.
@@Cechaflo ok cheers
@@piecetoyou8285 Our Best Wishes and Happy New Year 2024!!!
شكرا عل شرح رائع👍👍
Thanks for watching this video!
Thanks for the video. How do you know that the set screws will be on the grooves of the hook shaft when you loosen them to free the hook? I loosened the set screws to time it and it gets out of time after a short while because the set screws do not aligned with the grooves after I move the hook around to align it to the needle scarf. Thanks for your advice. Very helpful videos!
In fact the timing is done with the 'small gear'. It is not necessary to move the bigger gear. As you can see the small gear has two set screws. When both of them are loose the shuttle axis is free and can be moved back and forth.
ruclips.net/video/lGhoOsr91rk/видео.html
This shaft has no grooves to place the set screws. The shaft is thoroughly rounded.
After going the needle bar 2 mm approx. upwards considering the ascending movement, the hook point should meet the center of needle scarf above the needle eye. At his moment, you should carefully tighten one of the set screws. The other is hidden behind and after tightening the first one you would turn the big wheel to find the other screw to also be tightened.
I hope this information is useful.
We have another related timing video:
ruclips.net/video/pQGPdiY6m9U/видео.html
This is helpful. I wish you where talking while showing what you were doing. But very clear. Thanks
+azbikerider49 Thanks for watching...I will take into account your suggestion.
Vi un video donde su máquina tiene placa como para darle la distancia al material cuando va cosiendo Usted fabricó la placa de metal, puede hacer un tutorial sobre cómo hacerla gracias de antemano
Can you do a video on how the tension release is supposed to be hooked up when the presser foot is lifted. I can not find anywhere how all of it goes together and how and when it works. Thanks for all your video’s!!!
If I am right you are referring to the 'little pin' that is placed in the center hole of the bigger half cut threaded bolt. If the take up lever is lifted it puts in action a mechanism that pushes this little pin frontwards.
This little pin pushes the small black disc with slot guide (ruclips.net/video/_KIJbS4khyo/видео.html) releasing the tension of the thread.
At this time of the video you can clearly see the little pin in the back inside the center of the half cut bolt.
ruclips.net/video/_KIJbS4khyo/видео.html
If the original is lost, you could make a new one out of a wood nail or thick sewing needle(10 mm long approx.)
I hope this information helps.
buenas tardes señor cesar, yo tengo una pfaff 136- 2bs creo que es una maquina muy buena, su puntada maxima es 5.5 mm, ahora tengo la posibilidad de comprarme una de triple arrastre, pero tengo 2 opciones, la 1245 y la 1246, a 1/4 ,me las dan en el mismo precio pero no se cual sea mas versatil, o mas facil de manejar ,si la de una o la de 2 agujas? usted que. opina? me gustaria mucho saber su opinion! saludos de Leon Guanajuato!
Hola amigo compre en maquina de triple arrastre, él problema es que cuando la pongo en marcha golpetea la palanca de reversa , me podría decir él problema
Hello , I am Stefan , I have a Pfaff 145 with a painful small bobin. Is it posible to change the rotary hook wit a big one from Pfaff 1245-706? Kind regards!
The Pfaff 145 bobbin is slightly shorter:www.amazon.com/Cutex-Brand-Bobbins-Sewing-Machines/dp/B01AETIG8O#:~:text=The%20Metric%20measurements%20for%20this,of%20PFAFF%20Industrial%20Sewing%20Machines.
The Pfaff 1245 bobbin is slightly bigger:www.amazon.com/Cutex-Capacity-Bobbins-Sewing-Machines/dp/B09FKGJF3B#:~:text=The%20Metric%20measurements%20for%20this,MM%20Wide%20and%2011MM%20Thick.
I really do not know if it is possible to change the rotary hook from a Pfaff 1245
Unfortunately I do not have a Pfaff 145 for the testing if it is possible.
Is there anything I can do if my machine won't stitch forward after using a back stitch? It is like it doesn't go the other way even though the lever is down.
Boa tarde..
O modelo da pfaff de 2 agulha E normal a lancadeira ter uma folga .engraxei a maquina e ficou mais macia ,obrigado pela ajuda
hola cechaflo
muchas gracias por los videos
me gustaría conocer tu opinión sobre la maquina
de coser durkopp adler 267. estoy dudando si comprar esa máquina o la pfaff 1245.
gracias
Estimado Antoni, Las dos máquinas son muy buenas. Solamente Ud. tiene la última decisión. ¿Van a ser nuevas o usadas? Si son usadas tendría que basarse en el estado en que se encuentre cada una para decidir cual le conviene mejor; que tengas sus partes completas, etc. y el precio también tiene que ver.
Please I also have Adler 167-73 sewing machine buy I master how to use it
perfect .
Thanks for watching!
What needle do you use for that? I would like to take up upholstery and my father has the same machine. I find it hard to find the needle. I want to do vinyl and sofa fabrics TY
According to Pfaff 1245 manual, needle system is 134-35. The correct sizes go from 110 (european measure)=18 (Singer or american measure), 120=20, 130=21, 140=22, 160=23, to 180=24.
For thin materials, could use a 18, 120 Medium size material a 21, 22 Heavy materials a 160, 180
ruclips.net/video/vtfrcDS5WJQ/видео.html
For the projects you have in mind a 120=20 needle size would fit well. You could use standard upholstery thread 92 polyester.
There is a wing nut in the back to regulate the height of presser foot. It should go in the middle.
Threads:www.thethreadexchange.com/miva/merchant.mvc?Screen=CTGY&Category_Code=polyester-thread-092
store.keysew.com/thread
Hi Cechaflo, I have found all your videos very helpful, thank you for taking the time to make and upload them. I have recently bought a Brother 837 Walking foot machine for my upholstery business, on the whole it sews very nicely but on occasion it randomly skips some stitches. I have tried all the obvious fixes (new/correct needle, tensions etc) but wondered if you could advise where to try next. In between the skipped stitches it sews perfectly. Thanks again. Ray :-)
+Mackenzie Upholstery Hi Ray, Sometimes, the 'skipping issue' is caused when the 'hook point' is not close enough to the 'needle scarf' and at the time of sewing the needle bends a little and the mentioned 'hook point' does not reach the 'upper thread loop'...the solution is move the 'hook point' closer to 'needle scarf'.
On the other hand, perhaps, the 'hook point' is not catching the 'thread loop' on time (too fast), so, you have to move the 'hook mechanism' a little backwards to allow the needle form the 'thread loop' while its ascending movement(2,...3 mm)
+Cechaflo Thanks for your reply. I think I have managed to solve the issue. On close inspection i think your second suggestion was the problem. Rather than mess around with the hook mechanism on this occassion I adjusted the needle bar down a fraction and it has not dropped a stich since. Thanks again for your time and help ☺
+Mackenzie Upholstery Hi Ray, great you've found a fast solution for the skipping issue. A more steady solution would be to move the 'needle bar' the same 'little fraction' downwards.
You are welcome anytime!
hola disculpa mi maquina no sube el pedal q le puedo a ser la deje de utiliza en por dos años q le ago
Thanks for the helpful videos..just recently used them to overhaul a 1245 706/46... Looking to get a synchronized binder...can't figure out of the feed dog and plate listed for a model with a thread trimmer will work with my older model without one...would you happen to know? This video leads me to believe yes, but I haven't seen the inner workings of a newer model with the thread trimmer
My machines are old version and do not have the thread trimmer.
@@Cechaflo Mine as well, but I can only find a binder needle plate for one with a thread trimmer...didn't know if it would work on my older machine
@@reckonill www.tnattachmentco.com/
Good video but would be a great video if you added voice to what you were doing and thinking of doing! Cheers
Pregunta?. Porque salta puntada la maquina 1245 cuando se colocan perfiles plásticos.
En cuero, vinilo o ecocuero cose normal.
Ya revisamos el gancho y esta bien a punto e inicia su cruce al inicio ese la muesca de la aguja.
Muchas gracias por la orientación o colaboración que me puedan dar.
Si usamos una aguja delgada, la aguja si perfora al plástico, pero este se mantiene apretado/adherido a la aguja y no permite que el hilo se suelte debajo al ascenso de la barra de aguja y forma el 'bucle' que agarra el gancho y hacer el 'locstitch'. La solución es coser plásticos con una aguja mas gruesa, para que el hilo corra suelto y forme su 'bucle'.
I’ve just purchased a Pfaff 145 and it seems to sew pretty well. In many circumstances at different stitch length, thread and needle combinations. The upper tensions gets loose when sewing in reverse. Any tips as to why?
I have a video about tensions hopefully, it is useful. ruclips.net/video/_KIJbS4khyo/видео.html
Do a test on a piece of paper to check the stitch length with no thread on the machine. The same distance would be forwards and backwards. The needle point should enter the same holes. If it does not meet the same hole it means the small presser foot should be regulated to touch the feed dog on time to travel forwards or backwards.
hola buenas noches,me podría ayudar a conseguir algunas refacciones para mi maquina que es una adler 167-Gk373 triple arrastre ocupo pies,bobinas y dientes,saludos!
Amigo de pura casualidad ud sabe si en una Pfaff 146 las partes del pie alimentador etc son intercambiables con la 1246 mas q nada viendo la posibilidad de tener varios gauges en la apertura de la aguja
Cualquier informacion sera agradecida
Una disculpa, pero desconozco esta información.
Do you have a separate video on how you take the bobbin and shuttle out?
These links might be useful:
✅ ruclips.net/video/_KIJbS4khyo/видео.html
✅ ruclips.net/video/pQGPdiY6m9U/видео.html
@@Cechaflo thank you. I spent abit of time today on my Pfaff 156 post bed today. I got it working thanks to your video after 9-10 times adjusting it couldn't figure out why it kept slipping after 2 layers of leather . Figured I just had to grind flat the ends to those 2 screw that was on the shuttle gear. But besides that I had to reposition the hook to the needle . The rest of your video was very informative for future problems.
Gracias por estos videos! como siempre veo sus videos y trato de aprender! antes le había mencionado que gracias a sus videos me he interesado bastante en aprender a tapizar! y bueno he estado buscando bastante maquinas industriales usadas para comenzar! y creo que comprare una PFAFF 463!! vengo a preguntarle primero a usted maestro! ya que no se si la maquina sea buena para trabajos como los que veo aquí en su canal de youtube! me dijeron que esa me serviría pero la verdad preferiría preguntarle primero a usted que es el que de verdad sabe! sino que otra maquina o cual maquina pfaff podría recomendar para coser cuero o que me ayude a hacer trabajos como los que usted aqui nos enseña¿? por lo menos para empezar! después si dios quiere cambiaría a una mas avanzada!
+Xiomara Velasquez Me parece bien la máquina, para empezar a hacer tapicería, es sencilla, pero muy fuerte para coser materiales como el cuero/piel; mas adelante podría comprar otra industrial de triple arrastre. No vaya a pagar mucho por la máquina... un aproximado de 200 a 300 dólares a lo mucho y tiene que estar en buen estado, con su mesa y motor (es precio aprox en México).
ruclips.net/video/AI5hNCPcy5w/видео.html
Gracias por ver nuestros videos!
This machine is very similar to my pfaff 545 H3, I'm wondering if the same method of timing would / should work????
Yes, your sewing machine is very similar to 1245-706/47.
The timing method works out for it. This is a related newest video:
ruclips.net/video/pQGPdiY6m9U/видео.html
Onde comprar uma máquina dessas?
I have a 545 h4 and it's skipping stitches does the same procedure apply?
Yes, the process is similar. This is a related video:
ruclips.net/video/pQGPdiY6m9U/видео.html
Для этой процедуры (перемещение острия крючка ближе / дальше к игольному шарфу) необходимо было ослабить «вертикальную большую шестерню» сейчас, «острие крючка» достаточно близко к «игольному шарфу».
чтобы он оставался на месте, осторожно затяните «регулировочные болты».
Я собираюсь ослабить установочные винты маленькой шестерни, чтобы освободить челнок.
1. Установите «игольницу» в крайнее нижнее положение (нижняя мертвая точка).
2. Теперь поднимите планку на 3 мм вверх и удерживайте ее.
3 Теперь вам нужно совместить «острие челнока» с центром «иглы». Напоминаю, что челнок движется свободно, поэтому я могу разместить «точку крючка» точно в нужной части.
4. Осторожно затяните два винта один за другим.
5. Следующая процедура - определить высоту «игловодителя».
Итак, прежде чем что-либо делать, убедитесь, что «игла» выровнена с «острием крючка», как и в предыдущем шаге, на 3 мм вверх.
6. Слегка ослабьте «регулировочный болт» игловодителя, не позволяя ему упасть.
7. Мы можем слегка косить «игольную планку» вверх и вниз, пока «игольная коса» не встретится с «острием крючка» над ее ушком (в центре).
8. Теперь затяните регулировочный болт игловодителя.
9. Установите пластиковые крышки на место.
10. «Мизинец / носок» челнока должен войти в «канавку» под «узкой игольной пластиной».
Это не часть процедуры поднятия, а когда я разбирал транспортер. Я снова это отрегулировал.
Это тоже не часть явки. В нижней и задней части есть болт, который регулирует «тонкий рычаг» в передней части, где проходит нить (поэтому, если он настроен, не трогайте его).
Hi Cechaflo! You have been doing a incradible inspiring job! So I dicde to step forward and buy a real machine for the job! Is the Pfaff 1245-706/07 much diferent or worst from this one you use at this video? Thank you so much for evething you have been doing!
+TV Plus You are welcome! ...I'm so glad my videos were and are an inspiration for you!
señor el video no tiene voz y las explicaciones son en inglés me quedé igual
Are there any instructions or tips on how to change the timing belt for this machine? Thank you for your contribution Cechaflo!
I have no related video on youtube. Some useful drawings on 3.03 page of the manual:www.universalsewing.com/images2/parts_lists/all/6ihfjkle.pdf
As far as I know, it would no be a big deal to change this belt. Before purchasing the belt verify it is compatible to your machine.
www.amazon.com/Industrial-Sewing-Machine-Timing-16-410918-05/dp/B075XNCRD1
www.aliexpress.com/item/32950507719.html
@@Cechaflo That's very helpful. Probably also a good idea to make my own marks on the pulley and gear prior to swapping the belt. Thanks again
Does the hand wheel supposed to be 100% easy to spin ? I have some spots of my PFAFF 145 wheels where it is a bit harder to turn. Like the hand wheel is not 100% free spinning with some tight spots.
The hand wheel is linked to the clutch motor by a rubber belt. I would suggest you to check it out first with no rubber belt. Next, check it out with the belt attached to the motor clutch pulley. After doing this you would realize what is wrong.
@@Cechaflo yes this is without the belt attached and there is just one spot where the handwheel spin is not 100% free like it is rubbing against metal. Thank you for the video, I am going to try to time my 145 according to.your very detailed tutorial video. I also have oiled every moving parts but the hand wheel.is still not 100% free spinning.
Cesar, how did you get your machine to work with the newer feet? I bought the newer feet because I don't like sewing everything with welt feet but the feet hit each other. Any help would be greatly appreciated
In my case, I only bought the flat feet for the pfaff, attached it to the bars and they fitted perfectly without touching each other.
But in your case, (Suppose I understood your question) if the new presser feet is touching each other, despite putting them in the correct position, the solution would be to smoothly grind off one of the sides is touching.
Rusty McClintock
Thank you, I am not sure how to add a video here as it does look like there is any facility to do that?
The videos should be uploaded in youtube andl links would be pasted to this section.
Otherwise, to our channel emailsite: cechaflo@gmail.com
I have the same machine the timming is good but I have a little problem. My stitch length always seems to small. I have set the length on the adjustment knob and the lever on the back of the machine. Any other tips ?
Sometimes, the issue happens when the presser feet are not synchronized
@@Cechaflo I'll give that a try! Thank you for the quick response.
My friend you have to explain what you are doing it's going to be much better
hi. i have a quilting machine with multple stiching needles. its a new machine from china and its giving me lots of miss stitches. i have watched ur video which is very helpful to some extent. but i still have challenges timminf all 36 needles. what do u advice i do now?
I've no idea about a quilting machine...sorry. I think not easy to put it on time.
How do u thread 2-needle Pfaff 142 ind sewing machine?
I do not have a related video, sorry. I only have a one needle machine video:
ruclips.net/video/H4sOyVIYHt0/видео.html
Sir pleas muje masin ke niche ki jo badi do excel he wo or dati ka setting kese karna he wo batao pleas
GGGOOOOOOOOOOOOOOOOOD !!!!!
Sorry.... 1 more question : ) Do you have explanation video about eccentric wheel explanation (sewing machine)?
I have no related videos yet.
Did you take the gearboxes off and leave them off? The reason I ask is I can’t get them to stay bolted on
It is not necessary to remove the gearboxes. I only did it for instructional purpose.
This other review video is related:
ruclips.net/video/pQGPdiY6m9U/видео.html
@@Cechaflo do I need to put them back on? They just won’t stay on that’s why I ask. If they are needed.
@@PuffStitch I have not understood the question, sorry. Are you referring to the plastic case that houses the gear mechanisms? aren't you?
Bunā Ziua!!
Sunt tapițer si mi-am cumpārat un PFAFF 1245-706/47 vreau o pārere este o mașinā bunā si fiabilā?
Vā salut cu respect!!
It is a strong and trustable machine if it is in good condition and set up.
@@Cechaflo the machine looks perfect. it still needs small adjustments, I got it thanks to your review. for me you are an idol and I respect you for everything you do!! Greetings!
Hi,
Please help, I have Pfaff 245 and it runs to fast, even if I press the feet very gently. Is the any options to setup the speed?
Regards
These two videos show some ideas to slow down the speed of an inudustrial sewing machine. Nonetheless, the ideal would be a 'servo motor'
ruclips.net/video/5_0YQ_W8iVM/видео.html
ruclips.net/video/jaVDiZGi9js/видео.html
the longer needle is 190
Hello, any chances of giving me a hand please? My Pfaff 335 clone has got 2 problems: the manual foot lift does not work and the walking foot does not make contact with the plate so the presser foot stays in the same point all the time and doesn’t not stitch anything. I have got videos that show the problem. Please help if you can, thank you
I'd be glad to help if it is possible. Please, send videos to this comment section.
Haga un tutorial con poste de 2 agujas saludos desde Lima Perú
Muchas gracias por la sugerencia. Por el momento solo tenemos 2 videos que muestran una máquina de poste, triple arrastre de dos agujas.
ruclips.net/video/vU4mAuH1y_U/видео.html
ruclips.net/video/gvUmmyz2tRA/видео.html
Hello !
I bought a Pfaff 1245 and was rebuilding it with the help of my Machine Repair instructor, Tim.
Tim has sadly passed away.
I was working on an above-deck issue that involved the Needle Bar Cradle and I don’t know what happened...
The Walking Foot doesn’t walk.
I boldly tried to adjust it, by changing the timing on the rods behind the sewing machine.
Now, there isn’t anything in the Pfaff 1245 Manual about those rods.
Do you have any videos about a full teardown?
We were planning to do a full-teardown and rebuild.
Tim’s graduation exam was to strip the machine to parts, throw them in a bucket of grease and rebuild it within two hours.
So I know there is a way to adjust everything from scratch, but I don’t know where to look for this information.
In fact you have a good sewing machine. It is just matter of putting the pieces together to let it run again.
I think the most advisable would be to have the help of another technician. Unfortunately, I do no have more related videos to help, sorry.
Señor Cesar: According to an old Pfaff Owner's Manual, the machine requires needle "Subclass -706/05; -706/07: needle system 134-35. Subclass -706/47: needle system *190*." (190 r; MT x 190) Like yours, my Pfaff 1245-706/48 also came adjusted with a 135-17. I asked Groz-Beckert about the lengths of the two different needle systems and this was their reply:
"The needle systems 190 and 135x17 are exact, except for the length of the needle.
190 - 44.5 mm in length from the top of the eye to the top of the shank. 2.0 mm shank diameter.
135x17 - 38.9 mm in length from the top of the eye to the top of the shank. 2.0 mm shank diameter. The entire length of the needle is never mentioned when checking needles for a specific machine.
Unfortunately, the longer the needle, the better chance of having skipped stitches, or breaking a needle, exists. Many times the extra length on the 190 is not needed for the sewing operation. Many mechanics will lower the needle bar height 5.6 mm to accommodate the 135x17 needles. By doing this they reduce the chances of the problems mentioned above. Plus, the 190 needles are limited to a very small availability of sizes and point styles. On the other hand, the 135x17 needles offer a wide array of sizes and point styles."
So there are the trade-offs. Given the nature of the work you perform on the machine (slower speed with greater control, and precision, not high-speed production) the issue of skipped stitches may not be a factor.
What do you think? Thank you for your excellent videos! Muchas Gracias!
A local supplier recommended and sold me this needle size:photos.app.goo.gl/OXy61tSDRivoIZez2
photos.app.goo.gl/L4cFcdXvX1CcKjHk2
Hola Señor César. I have a .pdf copy of the original Instruction Manual for your model of the Pfaff 1245, that was scanned by the Keystone Sewing Machine Company. If you want a copy, give me an e-mail and I will send it to you. You might find it an interesting reference.
Hello Mr. Clinton, I also have found similar information for the 1245 Pfaff:
keysew.com/Webpages/Owners&PartsBooks/OwnersBooks/1245%20Owners%20Old%20Case.pdf
www.manualslib.com/manual/121969/Pfaff-1245.html
I really appreciate your assistance!
I have a Pfaff 1245-706/48 that needs to have some cleaning, and I wonder since it's only a digit of difference with mine I wonder if i can apply the same
The mechanisms are similar and you can do the same process on your Pfaff machine. This other video is also helpful to understand the timing process: ruclips.net/video/pQGPdiY6m9U/видео.html
@@Cechaflo Thank you! I will study both your videos. I am new to the field, and I hope to add extra life to this beautiful machine.
I have an extra question. Do you have any sources for the tables?
@@ThatTacoLady I do not know, sorry. I am located in Mexico. Hopefully, if you are in the USA:
www.sailrite.com/Sewing-Machines/Sailrite-Sewing-Machine-Parts/Table-Stands/Sewing-Machine/Fabricator
Perhaps, it would be necessary to elongate the hollow part of the machine to make your machine head fit perfectly.
A carpenter can do a new one for you or to restore the table of your machine have by putting over a new formica.
A yellow glue is useful to stick formica to a wood table: ruclips.net/video/o2xeezdF8Ss/видео.html
@@Cechaflo Very useful information! Thank you!