Actually, glocks are not with a hamer, so they don't need the slide to be cocked back to shoot once the mag is in, so when he released the slide there was already one bb in the chamber
zZmanYTB glocks have an internal hammer the term you are thinking of is double action so the trigger can cock the gun but racking the slide does the same while also chambering a bb
Robert A there are a lot of different types of OCD. It can be people scared of the dark, who must flip on and off switched a certain amount of times, to wanted everything to be perfect like a neat freak
Aaron M What in God’s great Earth do YOU a think OCD is. I have OCD, and so does my mom, and both brothers. I would know what OCD is. I really want to know what it is to you...
The gas port on the top is a compensator. The c in G-18c stands for compensator. A G-18 usually has a flat top like the G-17. Since the G18 is such a small gun with such a high rate of fire the compensator helps control recoil a wee bit, otherwise it'd fly itself to the moon and back on a 33rd magdump
@thecowboi039 full auto there's gonna be a lot of recoil anyway, but with a non ported barrel, muzzle climb will be greater. If you cover ur with your hand?, well it will damage the crap out your hand, but applying downward pressure will presumably reduce recoil (or just jam it from interfering with the slide) on the airsoft one tho? The compensator does nothing except for slightly lightening the external barrel I suppose
I liked this straight outta the box, the impromptu format combined with the gameplay footage was a nice change. I'd even go so far as to say that helps give the consumer a better perspective on what they're buying.
The loss os hopup in full auto is related to the cooldown effect, but not in the way that was said in earlier comments. The cold hardens the hop rubber, yes, but that tends to add more hop. It is less noticeable in the Marui type of hopup because the thin steel piece that presses the hop has also some elasticity. In KSC, the hop gain with cold gas and quick shots is more noticeable. What happens in full auto GBB´s is also related to cool down, but is different. The cool down makes the gun use more gas for each shot, and more gas means more silicon oil on the hop rubber. The hop rubber becomes slippery and applies less hop effect. To correct this effect, you just have to use dry gas (Like Abbey brut sniper gas). It will work a lot better. You´ll have to lube your gun yourself once in a while.
a GBB firing auto is going to have lower hopup since the power is going to be reduced due to cool down. It's also a new gun that probably has an over lubed hopup rubber and barrel which will also cause consistency issues.
Theory why full auto was sloppy hop. I believe the loss of hop comes from the rapid gas displacement. And as the silicone in the green gas accumulates on the bucking, it inhibits the ability to hop. That fraction of second between semi shots is enough to have proper contact with the rubber and enough to not "hydroplane" over and have enough contact.
@@junixsk8 Sure does, many gbbr users actually buy the softest bucking available for cold weather to avoid this issue. Disadvantage being the increased wear outside of winter.
@@BravoOneCharlie I'm saying that because I had this issue with my lm4. Specifically when using propane and "too much" silicone. Granted green gas bottles are the "perfect" amount of silicone, it does affect when rapid fire. Not taking your point out of question at all. I agree that cold makes it harder to provide hop. I also used to live in NH, and always played in MA fields. GBBs up north were not very happy with the cold. But again, I agree with your opinion and sure it comes with experience.
Thanks for not being a total dick, like most tryhard firearms guys tend to be. I'm more into firearms than I am into airsoft, but I still love being able to shoot people and not go to prison afterward, which is why I airsoft.
You can get them and get it working perfectly fine. But for the price of both the gun and the RONI, you might aswell buy an AEG and get better results. But I'd love to see some gameplay tho.
@@Elhugexx The same can be said for the real steel RONI set up. I just thought itd be sick. Nice to know others already went through with it. Id just like to feel the build quality of the RONI for the gbbs before id buy it. Also dont own a glock gbb but the 18c might change that.
I like the tm Glock better just because it has your markings, it’s more consistent, and it cycles faster because of the ...plastic.. slide. Love that EF is having their 18c come with extended mags.
9:38 Closest is D from Node, and far right is Airsoft Alfonse, 12:15 is Niko from Corridor getting shot (Must be playing TTT with the Node/ Corridor Crew)
@@Jeeps-ye5ct one of the matrix m4's and the SAI 1911 DS in c02. The 1911 made me satisfied enough even if i didn't get the m249 para I was hoping for. The Matrix M4 will be a decent backup gun if my usual MTC3 is down for any reason.
You lose hop bcause of cooldown. As the rubber gets cold it gets a little stiffer and therefore applies less hop on the bb. Furthermore the energy drops as well = less bb spin. Its pretty normal
Just saying y’all can buy We tech G18s for 85 bucks that are just as good. Elite force is charging almost 210$ for this. And the only difference is the trademark. Make your decision...
Ironic definition: Acting in the opposite way to what is expected, and typically causing wry amusement because of this. You wouldn’t expect a lot of the cool airsoft guns to come from a country that would want to ban guns, therefore you sir are wrong. Shame on you.
I have had a WE G18c for almost 2 years now and I really do enjoy the gun. Built a stock for it, have a grip, and made a rail for a red dot. Only problem with them is when full auto is on and you dump your mag, most of the time your slide doesnt lock back when your empty due to mag cooldown.
Take one that you like the looks of. Read in on the internet about it. Go to a shop and feel it, shoulder it. If you dont really care, take an M4, it is widely used so enough aftermarket parts. Lastly, call it an Airsoft replica and have fun
Just for anyone who happens to watch this & doesn't know. The "issue" on full auto isn't the hop, it's the inherently inefficiency of the blowback system in auto. When you switch it to "grin mode" it wastes a lot of gas, straight outa the ejection port & the FPS is all over the place. However well your hop is adjusted means nothing, so forget accuracy & just enjoy, it's not called a "fun switch" for nothing.
@@borkly2491 I believe when I posted this comment, both were the same price at $168. The full auto was what got my attention but I ended up getting the g17. Shortly after I ordered it, I changed my mind and got the g19 for it's size and convenience. This was during the middle of COVID so you know there was no customer service and delayed tracking. I got a refund for the g17 but it arrived anyway lol. So I got both guns for $168. I sometimes put the g17 mag in my g19 as an extended mag
Based on my knowledge in chemistry, I think the BBs losing hop up power is because of lower temperatures, the hotter a projectile is, the more kinetic energy it has.
When you take apart a Glock even the models you need to pull the trigger before disassembly. If you saw when you put the upper back on the lower the spring shot outwards it’s not supposed to do that. Taking the gun down wrong will cause you to strip the the lower and also it will rub against the trigger manifold which you don’t want. I have a collection of real and model glocks. Love the videos just wanted to share that.
I have g17 gen 4 and g18c and weird thing is that I can use g18c mag in g17 but cannot do other way round. G17 mag does fit in 18c but the performance of the gun is decreased like about 50%. Dont know why though.
WoahFear No, there is sadly no co2 version of this. You can pick up a co2 glock 17 but only buy the guns that specify they’re compatible with co2 mags. If you put a co2 mag in your gg gun it can seriously fuck it up. Oh and if it breaks, the co2 mag voids all warranty on the gun.
This is an enjoyable glock, I had so much fun with it. Unfortunately, it has its problems. The first one I purchased lasted about a week, until the slide continued to get stuck, and wouldn't complete a full cycle. I had to manually push the slide forward to complete the cycle. I returned it , and Evike sent me another replacement. This time it had problems once again with the slide. It would jam up in the middle of the cycle, similar to the first one. For such a fun full auto gun, it simply has too many problems that ruin the fun. It seems that they need to work out the glitches and problems with this gun , before they keep selling hundreds if not thousands more of this model....Elite Force needs to go back to the drawing board and get things fixed first. . All in all, in the end, I returned it one more time, (for a third time,) The 18C Glock failed once again. Would I recommend this Glock pistol? Absolutely not, its a total FAIL on Glock's part. I hope Glock and Elite and get their act together and fix the problems, this particular gun has. Sleepless in San Jose
Yeah I had the exact same problems, the recoil spring sucked, the full auto selector was very fragile, the mag release broke, and the slide wouldn’t return to normal position. I got a Glock 17 gen 3 instead, and I modded it out. Much better experience but I miss the full auto. 😢
@@phoenixatkatz9597 Naw Phoenni Pollini, Its you who doesnt have the experience my young grasshopper. Its a Known fact in the Airsoft world these 18 C's are junk. Oh...if it were as simple as some silicon oil. The slide and its internals have engineering flaws within the recoiling, and bucking of the gun, with a few other problems that cant be fixed with oil....LOL. thats funny. Read the hundreds of reviews on various different airsoft blogs youngster.
9:49 did any else hear a guy say “hey no full auto” 😂
Something Newts I think they’re referencing that one video where the guy was shooting so fast they thought it was full auto 😂
@@slimegleaux4947 thats exactly what I was thinking
"Aye no full auto in the building!"
@@GiantGourd "this is not full auto"
@@mobeezythefruit179 "that's not full auto?"
8:21 did he shoot two bb’s at the same time
sTrEAM sNiPer yes
yes, yes he did
he actually shot 3. He accidently got 2 in the chamber.
Actually, glocks are not with a hamer, so they don't need the slide to be cocked back to shoot once the mag is in, so when he released the slide there was already one bb in the chamber
zZmanYTB glocks have an internal hammer the term you are thinking of is double action so the trigger can cock the gun but racking the slide does the same while also chambering a bb
Pretty sure that the hop issue in full auto is from the bbs losing power due to mag cooldown
Also the cold gas makes the hop rubber harder which decreases hop.
Yeah, BBs not having time to make contact with nub doesn't make much sense.
Hpa Tap that baby
He cant the fill valve is at the top of the mag. He would have to drill&tap the mag. Hit up tapp airsoft and get the hpa drum.
@@ALEX-xd7ko I think WE mags fot and feed in the VFC/EF glocks so they could tap those
4:09
Normal person: just a few gaps but it doesn’t matter.
Every one with OCD: but it does matter.
3k subscribers with three videos Challenge good thing I don’t have an airsoft gun like that. I’d cry. I have major OCD when it comes to that
pretty sure that isn't what ocd is but ok
Robert A there are a lot of different types of OCD. It can be people scared of the dark, who must flip on and off switched a certain amount of times, to wanted everything to be perfect like a neat freak
@@gummibear1250 what in gods great earth do you think OCD is
Aaron M
What in God’s great Earth do YOU a think OCD is. I have OCD, and so does my mom, and both brothers. I would know what OCD is.
I really want to know what it is to you...
The gas port on the top is a compensator. The c in G-18c stands for compensator. A G-18 usually has a flat top like the G-17. Since the G18 is such a small gun with such a high rate of fire the compensator helps control recoil a wee bit, otherwise it'd fly itself to the moon and back on a 33rd magdump
if i cover it do i just have a huge amount of recoil
@thecowboi039 full auto there's gonna be a lot of recoil anyway, but with a non ported barrel, muzzle climb will be greater. If you cover ur with your hand?, well it will damage the crap out your hand, but applying downward pressure will presumably reduce recoil (or just jam it from interfering with the slide) on the airsoft one tho? The compensator does nothing except for slightly lightening the external barrel I suppose
Nobody is going to talk about Alfonse making a random cameo?
Node is there too this TTT game is their thing that they do
The whole Node crew and Leah was there
I liked this straight outta the box, the impromptu format combined with the gameplay footage was a nice change. I'd even go so far as to say that helps give the consumer a better perspective on what they're buying.
Mole Rat Stew
@@trapoutkingtv3290 yum yum
What happened to the orange tip. ? Was the barrel changed out???
Can the barrel be changed out on this specific MODEL GLOCK..???
8:45 in 0.25 speed 2 bbs wtf
bc there was one in the barrel already then he re inserted the mag and chambered a second round
It was acually 3
And in 8:21
I see it to
I went to like this but i didnt want to ruin the number
Are we gonna ignore the fact at 9:51 someone says nice trigger finger kid
Those are the node guys. Friends of his
he had double tab root beer 2.0 from call of duty
No he said nice trigger finger jet
A bunch a fucking geeks if ya ask me lololol
9:40 is that Alfons? Recognize those legs anywhere.
I can't believe I just watched like 2-4 minutes of a guy adjusting his hop up lmao
I like how Alfonse is just standing there in his tactical short shorts
Alfonce looks like "do you seriously want to try a full auto?🤣
4:10 my eyes hurt so many gaps someone revoke that gbb license that hurt my soul🤣
😂 i cant live if there is gaps in my mags 😂
Glock mags don't really care about the gaps anyway
9:38 hey! It's the guy from node
GrizzlySubset20 that "gUy" is called Alfonse😀
First Name Last Name I think he is talking about D
@@lunatik_8929 and niko i actually found out this channel through nodes channel i have been watching them for years and always found jet so funny
That guy is Jake and D
@@scripzzz. 99% sure alfonse isn't in Node
Love your reviews. You show the pistols or rifles then real testing. Big fan dude.
Cant wait to see the "no negotiations" part at MSW hahahah
8:32 was that airsoft alfonse? xD
Thats what im saying
dude dummy thicc tbh
theres no other airsofter who wears that beard or those tight shorts lol
I actually prefer this format for straight outta the box
The loss os hopup in full auto is related to the cooldown effect, but not in the way that was said in earlier comments. The cold hardens the hop rubber, yes, but that tends to add more hop. It is less noticeable in the Marui type of hopup because the thin steel piece that presses the hop has also some elasticity. In KSC, the hop gain with cold gas and quick shots is more noticeable.
What happens in full auto GBB´s is also related to cool down, but is different. The cool down makes the gun use more gas for each shot, and more gas means more silicon oil on the hop rubber. The hop rubber becomes slippery and applies less hop effect.
To correct this effect, you just have to use dry gas (Like Abbey brut sniper gas). It will work a lot better. You´ll have to lube your gun yourself once in a while.
D: “hey no full auto!”
a GBB firing auto is going to have lower hopup since the power is going to be reduced due to cool down. It's also a new gun that probably has an over lubed hopup rubber and barrel which will also cause consistency issues.
Theory why full auto was sloppy hop.
I believe the loss of hop comes from the rapid gas displacement. And as the silicone in the green gas accumulates on the bucking, it inhibits the ability to hop. That fraction of second between semi shots is enough to have proper contact with the rubber and enough to not "hydroplane" over and have enough contact.
More like the hop rubber gets too cold and gets harder. Quite common on any gbb at full auto
@@BravoOneCharlie that makes sense too
@@junixsk8 Sure does, many gbbr users actually buy the softest bucking available for cold weather to avoid this issue. Disadvantage being the increased wear outside of winter.
@@BravoOneCharlie I'm saying that because I had this issue with my lm4. Specifically when using propane and "too much" silicone. Granted green gas bottles are the "perfect" amount of silicone, it does affect when rapid fire.
Not taking your point out of question at all. I agree that cold makes it harder to provide hop. I also used to live in NH, and always played in MA fields. GBBs up north were not very happy with the cold.
But again, I agree with your opinion and sure it comes with experience.
@@junixsk8 The silicone issue is plausible too, I only use propane for that reason. Last place you want lube in in your barrel and bucking
I like how you shoot the Glock full-auto as Alfonse just sits there and watches
I’m a firearms guy. And expected to see some glock 18 full auto 😂 love our air soft brethren, tho!
Thanks for not being a total dick, like most tryhard firearms guys tend to be. I'm more into firearms than I am into airsoft, but I still love being able to shoot people and not go to prison afterward, which is why I airsoft.
Redhead Metalhead spoken like a true American😂😂
Redhead Metalhead 🤣
Am I the only one whod like to see the micro RONI platform adapted for these gbb glocks? Lol.
www.redwolfairsoft.com/redwolf/airsoft/Accessories_Conversion_Kits_GBB_CAA_Airsoft_Division_MICRO_RONI_G5_Pistol_Carbine_Conversion_for_Glock_Series_BK.htm
You can get them and get it working perfectly fine. But for the price of both the gun and the RONI, you might aswell buy an AEG and get better results. But I'd love to see some gameplay tho.
@@Elhugexx The same can be said for the real steel RONI set up. I just thought itd be sick. Nice to know others already went through with it. Id just like to feel the build quality of the RONI for the gbbs before id buy it. Also dont own a glock gbb but the 18c might change that.
Straight outta Compton worlds best film
Sry for my English im a swede
I like the tm Glock better just because it has your markings, it’s more consistent, and it cycles faster because of the ...plastic.. slide. Love that EF is having their 18c come with extended mags.
This is budget friendly
@@rustywalters80 this one cost 189 bucks on evike- wouldnt call that budget friendly for a pistol
8:25 when i saw them shorts and sleeveless I immediately knew who it was
General Grievous who
@@backon_roads alfonse
Nobody more than bigman alfonse
9:38 Closest is D from Node, and far right is Airsoft Alfonse, 12:15 is Niko from Corridor getting shot (Must be playing TTT with the Node/ Corridor Crew)
what happened to the orange tip at the end????????
They removed it for looks
When he gets a real gun and u hide it with his air-soft stash to confuse him
Mobimba Larson 😂accidentally kills someone
Nyre LikeKyrie “accidentally”
Jacob Seelye 😂😂
“hey no full auto” 😂😂 gotta love that guy
The lack of hop on full auto is down to magazine cool down and the velocity dropping, your first gbb? 😉
Leigh Rosser mag cooling is marginal to the amount of gas you use on full
Whats a hop?
@@Bouletts69 hop up that they meant it helps your aim
@@aushynebell2238 how does it help the aim?
@@aushynebell2238 does that help with like recoil?
Jet it’s 2019 when will your field come back?
that gun looks REALLY fun to play with, If I hadn't just spent my money on the B.O.A. I'd probably pre-order this and a few extended mags
What’d you get?
@@Jeeps-ye5ct one of the matrix m4's and the SAI 1911 DS in c02. The 1911 made me satisfied enough even if i didn't get the m249 para I was hoping for. The Matrix M4 will be a decent backup gun if my usual MTC3 is down for any reason.
That dam orange tip any advice on how to cut it and make a smooth finish with paint ?
Paint
Ive heard that heating the tip with a hairdryer or heat gun if you have one to melt the glue might help
End up breaking it off with some pliers and scratch my barrel up a bit but I'm happy with it now 😊
Desertfox should make another gear overview, an updated full kit
i dont know if I buy this or a TM G18c.
Help me
I dont care about the accuracy if I was getting shot at by this Glock 18C - I would be scared by the sound and Rate of Fire !
Just Alfonse chillin in the back
4:18 why does it sound like a like a semi real glock when the slide locks it sounds real
It doesn’t lmao
Everybody: Airsoft
Philipines:Pelet
You lose hop bcause of cooldown. As the rubber gets cold it gets a little stiffer and therefore applies less hop on the bb. Furthermore the energy drops as well = less bb spin. Its pretty normal
So bursting it is better?
thank you for telling me about the gun you told me about i love the guns so much you are the best i have not stop using it is so much fun that again
No one:
American Cops: 6:32
Hahaha
Ayyyy marry Christmas Jet
Anyone also here your man at 9:49 be like
‘Hey no full auto’
Luca Wiley yup
Is the orange tip removable?
I'm in California, this is a Glock 18c. This was just delivered to my house...
Yeah, got me for a few secs there...
Is it metal model ?
@@mimer99rocks18 yes
At 17:16 your notification misspelled cringy love ur vids!
11:50 i mcfalling
How does nobody laughs at this 😂😂😂
Lmao
is it just me or when jet says elite force gas it sounds like wheat force gas🤣🤣
Just saying y’all can buy We tech G18s for 85 bucks that are just as good. Elite force is charging almost 210$ for this. And the only difference is the trademark. Make your decision...
n o t w e - t e c h n o
in my country the we tech ones are like 270-300 bucks while the umarex is 260, and here u cant find any extended mags for the WE, not even second hand
When real ammo is so expensive to shoot, airsoft is fun.
You ever notice how a-lot of cool air-soft comes from the state that wants to ban guns.
Kinda ironic don’t you think?
Ironic definition:
Acting in the opposite way to what is expected, and typically causing wry amusement because of this.
You wouldn’t expect a lot of the cool airsoft guns to come from a country that would want to ban guns, therefore you sir are wrong. Shame on you.
Yes, because crazies cant go on killing sprees with air-soft guns
Lol did anyone see black beard from r6 on the left at 8:20 😂😂😂
8:19 is it me or do i see 2 bbs coming out
3
8:18 did he shoot 2 bb's? im new to airsoft idk how this stuff works
Or you can buy a WE Glock 18c for $89. I've been using mine stock for years
Spookiest_ this is if you want trades and quality
I have had a WE G18c for almost 2 years now and I really do enjoy the gun. Built a stock for it, have a grip, and made a rail for a red dot. Only problem with them is when full auto is on and you dump your mag, most of the time your slide doesnt lock back when your empty due to mag cooldown.
@@bradleyvedrine5493 we tech glocks ARE quality, it's the one good thing WE makes
I don’t know where you could get one in the us anymore, Homeland security and ice like to confiscate them through the mail
So it was you who sprayed me with the 18c, lol. Nice one
3:33 his hand
His hand... Is broken!?!
this gun is alot louder than i expected.
the pistol fires two rounds simultaneously @ 8:21
Does anyone know how it will do with the CO2 mags? Play in the cold a lot so it's something I always have to ask about.
Let your mags sit outside in the cold for an hr or so , as long as the mags are cold
I am thinking of getting an assault rifle. I was wondering if you had any suggestions or tips for me
Take one that you like the looks of. Read in on the internet about it. Go to a shop and feel it, shoulder it. If you dont really care, take an M4, it is widely used so enough aftermarket parts. Lastly, call it an Airsoft replica and have fun
Erik Timmerman cheers man that has helped a lot. I will do that
@@owenhorton5670 lancer tactical or even better, g&g combat machines
ICS transform4 is nice for beginners
@@owenhorton5670 no worries, this sport lives on player base. Just keep asking and you Will find somebody who wants to help you
Just for anyone who happens to watch this & doesn't know. The "issue" on full auto isn't the hop, it's the inherently inefficiency of the blowback system in auto. When you switch it to "grin mode" it wastes a lot of gas, straight outa the ejection port & the FPS is all over the place. However well your hop is adjusted means nothing, so forget accuracy & just enjoy, it's not called a "fun switch" for nothing.
Damn, kinda want this instead of glock 17 gen 4 now
@@borkly2491
I believe when I posted this comment, both were the same price at $168. The full auto was what got my attention but I ended up getting the g17. Shortly after I ordered it, I changed my mind and got the g19 for it's size and convenience. This was during the middle of COVID so you know there was no customer service and delayed tracking. I got a refund for the g17 but it arrived anyway lol. So I got both guns for $168. I sometimes put the g17 mag in my g19 as an extended mag
Based on my knowledge in chemistry, I think the BBs losing hop up power is because of lower temperatures, the hotter a projectile is, the more kinetic energy it has.
You are right the gun had the cooldown effect
i cant imagine how satisfying it is to set guns down on a carpeted table.
10:00 is that airsoft Alfonse?
What is better for the heat, green gas or co2?
That full auto would work better if it was hpa tapped.
Didnt know there was another airsoft shop other than gearbox sick
His second mistake with double stack mags, for optimal feeding you want to have it stacked properly.
Do you have to use green/black gas on this gun?
8:24 mmm Alfonse thighs
did you take the orange tip off
Can u tell me that what things do I need for this gun and which bbs also does this gun Needs battery and charger please tell someone
It’s a gas pistol. Therefore it uses gas. No batteries. Batteries are for electric guns. BBs is whatever you want just don’t go below .20g BBs
When you take apart a Glock even the models you need to pull the trigger before disassembly. If you saw when you put the upper back on the lower the spring shot outwards it’s not supposed to do that. Taking the gun down wrong will cause you to strip the the lower and also it will rub against the trigger manifold which you don’t want. I have a collection of real and model glocks. Love the videos just wanted to share that.
6:59 if its so clearly marked why did it seem hard to identify which direction?
Should I get this instead of a standard M4? its better for my budget and has full auto but idk.
@ 3:48
isnt the rear sight adjustable? it's connected with a screw on the 19.
“Hey that’s a nice trigger finger Jet” 😂
Can you put metal bbs in this?
Does your barrel also move alot? Mine does
That full auto ROF is nuts!
This a good weapon for self defense, all those BBs bustin
Weird question can it take Glock 17 mags and can the extended mag fit in a 17
Im not sure about elite force but tokyo marui has same mag for g17 and g18c
They are interchangeable, I messed around with both yesterday
I have g17 gen 4 and g18c and weird thing is that I can use g18c mag in g17 but cannot do other way round. G17 mag does fit in 18c but the performance of the gun is decreased like about 50%. Dont know why though.
God i can't wait for this to hit danish stores
My man got that olight 😎you know good light defense props to you cause I own a bunch of olight and I love em
*”Hey no full auto!”*
Any way to remove orange tip without losing accuracy ?
So u don't have the money. BUT I could buy the we Glock 18c gen4.
Should I????
Pls help
normal gun recoil control: tip down
airsoft gun recoil control: tip up
is there a co2 version of this
Yes just buy a co2 mag for glock 18c
@@rustywalters80 lol no don't do that, put a co2 mag in a green gas gun and it's gonna break in minutes
WoahFear No, there is sadly no co2 version of this. You can pick up a co2 glock 17 but only buy the guns that specify they’re compatible with co2 mags. If you put a co2 mag in your gg gun it can seriously fuck it up. Oh and if it breaks, the co2 mag voids all warranty on the gun.
Sbeve The gun uses either. EF don’t sell different versions of the gun, just different mags.
The full auto is so satisfying
This is an enjoyable glock, I had so much fun with it. Unfortunately, it has its problems. The first one I purchased lasted about a week, until the slide continued to get stuck, and wouldn't complete a full cycle. I had to manually push the slide forward to complete the cycle. I returned it , and Evike sent me another replacement. This time it had problems once again with the slide. It would jam up in the middle of the cycle, similar to the first one. For such a fun full auto gun, it simply has too many problems that ruin the fun. It seems that they need to work out the glitches and problems with this gun , before they keep selling hundreds if not thousands more of this model....Elite Force needs to go back to the drawing board and get things fixed first.
. All in all, in the end, I returned it one more time, (for a third time,) The 18C Glock failed once again. Would I recommend this Glock pistol? Absolutely not, its a total FAIL on Glock's part. I hope Glock and Elite and get their act together and fix the problems, this particular gun has.
Sleepless in San Jose
Yeah I had the exact same problems, the recoil spring sucked, the full auto selector was very fragile, the mag release broke, and the slide wouldn’t return to normal position. I got a Glock 17 gen 3 instead, and I modded it out. Much better experience but I miss the full auto. 😢
same, umarex glocks always have problems for me.
@@phoenixatkatz9597 Naw Phoenni Pollini, Its you who doesnt have the experience my young grasshopper. Its a Known fact in the Airsoft world these 18 C's are junk. Oh...if it were as simple as some silicon oil. The slide and its internals have engineering flaws within the recoiling, and bucking of the gun, with a few other problems that cant be fixed with oil....LOL. thats funny. Read the hundreds of reviews on various different airsoft blogs youngster.
Would this be a good first airsoft gun or would a elite force 1911 tac be better? (Money is no issue)
If money is no issue you’ll have a lot more fun with this
Do you think that somebody should make the SilencerCo Maxim 9 in airsoft, that accepts EF glock mags?