That mag thing of the bbs getting stuck is a user error of yours, you havent filled it up evenly so its on a zig zag patterns and no holes in the middle, those holes what cause it to jam up like that, TM mags do this too, idk if a better spring would fix it
weird, I leave empty bb holes in my WE Glock, TM Hi-Cappa, and KJW M9 all the time. Never got a jam/misfeed in 4 years of playing with the pistols and they were my primary for 3 years until I got a Tippmann. Having that said, I also never lubed the mag spring.
@@AJ_130 No, the guy edited his comment. Before it said "I love how she calls his wife "girl" in the title" then he corrected it after being pointed out.
There shouldn't be gaps between the bbs. That's the problem. Just care about the gaps by loading it carefully and it'll be just fine. It's the same with marui hicapas
I think i know what causes the Mag-Fails: When you look inside the "channel" where your bbs are, between the beginning of the lip and the "channel" , youll probably see a slight overlap which catches the bbs. I had the same problem with my KJW KP08. In case iam right, just take a peace of sandpaper and grind it down:) Best wishes from Germany:)
That was a really nice honest review. I like how he sent everything to you accessory wise so you could test everything and give us the viewer a good idea how everything fits and looks I also noticed the Raised sites for when you got your suppressor on nice feature. You and Leah did a really good job thank you. 👍😊🤘
Regarding the BB jamming, I had the same issue but only when not stacked properly, if you look at the video you can see where the bbs are right ontop of one another instead of slightly to the side. When I made sure to put them in correctly my mag feed without issue every time I tried and it jammed up every time when I loaded them incorrectly.
The probable cause of the magazine jam is because you haven't fully loaded the magazine for each BB stacked. What I mean by this is, you have gaps in between the stack which cause extra friction on the feeder well when pushed upwards and can cause this jamming issue. Be careful and make sure to fill each and every individual BB in the stack to ensure that you do not have this issue. I learnt from experience, trust me.
Wh... Wha... What's with the clickbait thumbnail man? I sat through the entire video wondering what happened to your missus and why she was bleeding. I was starting to feel bad that the pistol caused that... but now I feel betrayed.
Yeah... The content is nice and ok. Don't understand why. I'm subbed to Novritsch and saw him talking about his gun before. So it made sense for me to watch this.
This totally looks like a kjw kp05 with hardened steel hammer section, different nozzle and outer barrel. The grip is from a kp06 and the extended catch is also kp06. Hop up etc is the standard kjw design upon first look
magazine issue. I have seen the same problem with TM 5,1 mags several times, it has always been related to the bb´s, eg ICS bb = problem, G & G bb = no problem
Please make a video when you take off that orange tip I want to see how much work other airsofters have to do to remove them just to attach a tracer or suppressor.
With a gas pistol, you get the most range, consistency, and power by using the heaviest bb that your hop-up can lift. Also, I find it hilarious when people think they need to oil all the parts of airsoft pistols. Any oil you put in the upper half of your pistol will find its way into your hopup and will have a detrimental effect on accuracy. All you need is a few drops of 100% silicon oil on your magazine seals every time you insert a new co2 or once every 3 times you fill up with gas.
Matthew Hopkins... I'm pretty sure what Novritsch was saying on his page was: while US and Italian orders won't be immediately compatible with the adapter, you can still manage to remove the orange tip and gain access to the threads underneath. Just like in this vid towards the end, Jet had his orange tip removed and the threads exposed.
if youd load the bbs the way the should be youd be good sometimes you load 2 bbs on the same side while they should be one left one right one left one right
dude yes, I actually can't believe all the hype this overpriced KJW is getting. Yeah KJW is good, I love mine to death, but people are acting like this is the next TM...
Slide is from a KP08, grip is from a KP06. Outer barrel is the only new thing. Internals I believe are the same in any KJW hi-capa but the purple bucking is from the IPSC series or something like that.
Ok and now go and sum that up how much you would have to pay to buy those parts one by one then built it like the SSP-1. At least it's already built in one piece and you don't necessarily have to upgrade it. And cheaper.
Its not a 1911, its a 2011. A 1911 has a one piece frame with separate grip scales. 2011 like this have a polymer grip frame with folded in grip scales which is bolted to a metal frame. Oh n there is no lower frame its just Frame and Slide. As for the gun its such a shame he used that gawd awful slide, no doubt KJW ( the manufacturers ) offered it cheap to get rid of them. Helical Grooved Barrel is a bit naff to but livable with I suppose as it is his signature on rifles apparently. With a nicer more standard slide and a proper slide mount for the Mini Reddot this could have been something quite special.
A re-branded over rated KJW Hi-Capa by the looks of it. Added coloured nozzle to make it 'custom' and stamped a Novritsch logo on it. I'm sure lots of fan boys will buy it. Honestly think i'd rather spend the money on a WE or Armourer Works Hi-Capa and support lots of local airsoft retailers, rather than just one RUclipsr. The problem you're having with the green gas magazines is not lack of oil. It's an over moulded feed lip which will need replaced for a good one or modified. Otherwise the BB jamming in the mags will keep happening. The chrono results were on 0.25g BB's which is not what they are meant to be measured with. 0.20g BB's is the chrono standard. Actual results would of been 365/370 fps with co2 and 345/350 fps with green gas. Most sites for cqb in the world tend to have a 1 joule limit of 328 fps. So this renders the pistol completely useless to most countries. (unless the ambient temperature is much cooler. Results would then be lower) 3/10 from me. I expected more customness and maybe a nicer company to make it. KJW is a bit meh.
@@alvinlam3160 Absolutely correct. KJW pistols are okay with the co2 mags. Green gas is underwhelming in KJW pistols. I'd much prefer a WE or AW pistol as they shoot awesome on green gas.. Especially the higher PSI stuff like Nuprol Red Gas or similar. TM stuff is overpriced for what you get in all honesty. KJW is decent but not something you'd expect from a Guicci RUclipsr brand. I was expecting maybe a WE/AW base gun with an upgraded hop unit or something to shoot accurately like a TM. You can run those on gas or co2 also. Must of been a pricing issue or maybe lack of knowledge in the pistol world on his behalf? Maybe stick to sniper rifles Novritsch! :D
Isn't the feeding issue because that little brass ring on the back of the mag is loose and needs to be tightened as per any gas fed magazine. Same for the co2. Correct me if I'm wrong
with the BB's getting stuck, i had the same with my WE Glock 17, the plastic guider at the top of the mag doesnt really fir the rest of the mag so when the spring pushes bb's up they get stuck under the plastic guider. i fixed that by filing the edge of wich worked
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
In 3 years you’ll be able to drive onto a milsim in a Novristch tank
and it will be perfect
I'm saying
Imagine that: A Novristch Leopard 2A4 with improvements on the original version XD
Joshua Über ikr probably even make s Novritsch candy or gun
Fuck yes
how do buy novritsch tape tho
Hi Leah
Exactly. That's what I need in my life.
But is it better than FLEX TAPE
Unicorn Leah #novritchspeedsofttape
Where are u guys from and do u travel a lot for airsoft games
open box:
*WAAAAS UP GUYS!*
hahahhah
This is really underrated.
This is amazing!!!
i feel like he could put in a voice box thing and it plays everytime you open the box
15:16 the reason that it is James is because the bbs aren’t loaded right in the mag
Jammed
@@balltown1821 yessssss
“Guns dry out during shipping”. Yeah oil definitely evaporated over a few weeks. Yup.
3:24 the dude checked if their was any security cameras
Mah nigga
Didnt check good enough huh
That mag thing of the bbs getting stuck is a user error of yours, you havent filled it up evenly so its on a zig zag patterns and no holes in the middle, those holes what cause it to jam up like that, TM mags do this too, idk if a better spring would fix it
Exactly what I was going to say
I was gonna say that I was looking to see if it had already been said.
yesss hahaha you should see the academy
weird, I leave empty bb holes in my WE Glock, TM Hi-Cappa, and KJW M9 all the time. Never got a jam/misfeed in 4 years of playing with the pistols and they were my primary for 3 years until I got a Tippmann. Having that said, I also never lubed the mag spring.
Slodin how my ocd would never allow that
Sniper not good enough *builds own* Grenade not good enough *builds own* Pistol not good enough *builds own* Tape not good enough *builds own*
BlackJack frick u peice of 💩
Atomic_TurtlesTV what the hell is your problem?
Atomic turdles What is your problem you fuck
He didn't build anything. The sniper is a Modify M24, grenade is Airsoft Innovations, pistol is KJW.
ZXJ4K3XZ he was a significant part of the design process.
I love how he just calls his wife "girl" in the title.
benjee you used she and his make up your mind
@@liquidsmash3614 ???
@@rexheadproductions5 i think they have one chromosome too many
@@AJ_130 No, the guy edited his comment. Before it said "I love how she calls his wife "girl" in the title" then he corrected it after being pointed out.
If I said to my girl I can see your arm ripple. No matter what caused it. I would be in huge trouble...
These laughs and convos make me uncomfortable
fr tho
its all fake
@@tomdixon4825 They are naturally awkward if you watch enough of their videos it's pretty easy to tell.
Same
Diddums.
Coming soon: The Novritsch SST-35 the best custom tape for airsoft packing
Novritch: this tape will be 400 dollars per inch
"Thats how you know youve made it"
At that moment he was remembering the time when nov was a smaller account
So it seems Novy boy made his own tape... How much for one roll?
lenni ..........?
Rosendo Arguero just to flex on everyone at the field showing you made it
That´ll be you first born child please
69420 dollars 🅱️🅱️🅱️🅱️💯💯💯💯💯💯💯💯💯👌
It's probably steel aluu-meenum and with a special ssg24 outer barrel so I'd say $452
The feeding issue is user error. You have to have them stacked properly. Fill in the gaps between bbs
There shouldn't be gaps between the bbs. That's the problem. Just care about the gaps by loading it carefully and it'll be just fine. It's the same with marui hicapas
Patrick Sturm much agreed
Every pistol misfeed I've seen has been from poor loading
Great, I like the straight outa the box series
i was planning to buy a pistol twice as heavy, full metal and all... this definitely more comfy if you use it as a primary
I think i know what causes the Mag-Fails: When you look inside the "channel" where your bbs are, between the beginning of the lip and the "channel" , youll probably see a slight overlap which catches the bbs. I had the same problem with my KJW KP08. In case iam right, just take a peace of sandpaper and grind it down:) Best wishes from Germany:)
The interesting thing is i have the Green gas version too and my mags never failed like theirs.
@@KiranTheSecond hmm, maybe Novritsch already corrected the magazine lips. If not, my thoughts were wrong:)
it might not an issue with every mag, but as this is a re-branded upgraded KJW hi capa it wouldn't surprise me if it was the same issue
@@barkers64 jes, the Magazines seem to be close to similar
GERMAN ENGINUITY
That was a really nice honest review. I like how he sent everything to you accessory wise so you could test everything and give us the viewer a good idea how everything fits and looks I also noticed the Raised sites for when you got your suppressor on nice feature. You and Leah did a really good job thank you. 👍😊🤘
Novirtsch should make a aeg
uhh no....
No
It would be overpriced af lol
He is making an Aug
Why he is known for sniping
Just recieved it myself! Shot it a couple of times and am pretty happy with it. Lets see how the first skirm goes.
I do like the holster but realised Way too late that it's not usefull for me (a lefty)
Novritsch said he will be selling a left-handed version soon.
He did? Thanks for sharing I guess I missed that. Well I guess I have a spare one untill I decide to dualwield
Stefs Engineering I haven’t received mines yet :( my package tracker says pre-shipment and I’m in California
vincent14196 so does mine and I’m on the east coast, probably customs shit
Did he just called unicorn Leah fat! “ I can see your arms ripple “ LMAO!! Dude my wife would kill me if I ever said that lol
That's your problem 😁
Here's the trick ... if she already slapt you ... don't tell her, her arm was wiggleling doin it 😂
the spiral fluting is for heat dispersion but in this case it is to save weight or just aesthetic.
Regarding the BB jamming, I had the same issue but only when not stacked properly, if you look at the video you can see where the bbs are right ontop of one another instead of slightly to the side. When I made sure to put them in correctly my mag feed without issue every time I tried and it jammed up every time when I loaded them incorrectly.
No, it's the magazines. I have one and it happens to my green gas mags as well.
Love how they put their fingers in the gun. It can snap back and do some damage. I love that look with the attachments though.
15:20 Lod the mag correctly
The probable cause of the magazine jam is because you haven't fully loaded the magazine for each BB stacked. What I mean by this is, you have gaps in between the stack which cause extra friction on the feeder well when pushed upwards and can cause this jamming issue. Be careful and make sure to fill each and every individual BB in the stack to ensure that you do not have this issue. I learnt from experience, trust me.
Wh... Wha... What's with the clickbait thumbnail man?
I sat through the entire video wondering what happened to your missus and why she was bleeding. I was starting to feel bad that the pistol caused that... but now I feel betrayed.
Willzinator it’s how she got her callsign, a long time ago…
Yes, they did clickbait the video.
Yeah... The content is nice and ok. Don't understand why. I'm subbed to Novritsch and saw him talking about his gun before. So it made sense for me to watch this.
Willzinator Feels bad man😭😭
Willzinator so true
The mag wasn’t feeding at 15:32 because he didn’t have the mag double stacked. If it is out of order it puts a weird bind on the bbs in a sense
Bro, the bbs have to be stacked correctly, all hi cap gbb pistols do that...
stop the cap
stop the stack
"not into hi capa builds like me"
*oils magazine after not loading it correctly*
God, she's a beauty. The people are attractive, too.
The people were okay
*They had us in the first half, not gonna lie*
I was gonna say
This totally looks like a kjw kp05 with hardened steel hammer section, different nozzle and outer barrel. The grip is from a kp06 and the extended catch is also kp06. Hop up etc is the standard kjw design upon first look
magazine issue. I have seen the same problem with TM 5,1 mags several times, it has always been related to the bb´s, eg ICS bb = problem, G & G bb = no problem
MKA. I had the same problem with a tm and madbull tracer bbs. Those bbs just plain sucked.
US orders are from a warehouse in my home state of Pennsylvania my order took 12 hrs
"Oil the crap out of the magazine" He really doesn't know a lot.
His 50 thousand dollar collection says different
HI-Capa mags have a tendency to jam if they arent stacked perfectly, sometimes theyll feed sometimes they wont, it depends if it wants to be nice.
"Its so heavy" Novsritch: hold my ssg
15:00 try not to leave gaps between bbs when you load it. Might help with issue
Roses are red
Violets are blue
I got clickbaited
And you did too
HPA pistol with remote line and air tank????
Please make a video when you take off that orange tip I want to see how much work other airsofters have to do to remove them just to attach a tracer or suppressor.
Cross Tactical Airsoft ever find out about that??
"Is it also a novritch red dot?"
💀💀💀😂
With a gas pistol, you get the most range, consistency, and power by using the heaviest bb that your hop-up can lift. Also, I find it hilarious when people think they need to oil all the parts of airsoft pistols. Any oil you put in the upper half of your pistol will find its way into your hopup and will have a detrimental effect on accuracy. All you need is a few drops of 100% silicon oil on your magazine seals every time you insert a new co2 or once every 3 times you fill up with gas.
Novritsch Ferarri 😂 he would say "the original Fererri, wasn't for me. So I made one myself"
What helps with the mag is that the bbs have no gaps in the mag like they do in the video, they should perfectly overlap
When it says America and Italy get non threaded outer barrel then House Gamers recieved non thread, while Jet gets a threaded one
Where did you hear American barrels will come non-threaded?
On the thread adapter page in novritsch's website it tells you that orange tip barrel doesn't have threads.
Matthew Hopkins... I'm pretty sure what Novritsch was saying on his page was: while US and Italian orders won't be immediately compatible with the adapter, you can still manage to remove the orange tip and gain access to the threads underneath. Just like in this vid towards the end, Jet had his orange tip removed and the threads exposed.
@@Le_Spam_Man2100 House Gamers Barrel is not threaded, Novritch is releasing a threaded barrel soon with the thread inside to be bought separately
Was the orange tip easy to remove?
For green gas magazine is not the jamming problem it's how you feed the bb properly. Do not miss a bb while feeding the magazine
That pistol is amazing
sitting in a small room
Leah: Wow that's loud
on the field: who the fuck shot me
Pro tip: try to have a dirty mind while watching
if youd load the bbs the way the should be youd be good sometimes you load 2 bbs on the same side while they should be one left one right one left one right
I would love to see a true unbiased side by side with a KJW Hi-capa
Heard so many people say this, advice on many forums is buy KJW , same gun lower price...I'm going with a KJW
Not bitching but... that “advanced magwell” is called a flared magwell, just for your knowledge
The fit and finish is sooooo typically KJW.
How did you get the thread adapter on? The one Dayton received had no way to screw in the thread adapter from what I saw in his live stream.
Clickbait thumbnail, shame.
facts
You should also make sure the round zigzag with no gaps in the mag, it won't misfeed that way
Jet wants a novrarri
The feeding problem is about how the bb pellets are stocked inside. They should be in order. It happenned the same in all the guns I've tried.
My preferred brand of tracer is gamer girl
I have the same feeding issues. Especially with not high polished ones. For example with G&G BBs there are no feeding problems.
This was the most awkward thing I’ve ever watched great review though
Lots of cringe moments and fake laughing
5:18 ‘It’s like a hi-capa” It is based off the hi-capa, if you read his website at all
I think you got the title wrong. Should be Straight outta the box: KJW hicapa
So true
Why dont you comment on the millions of m4 rip offs too?
@@justinworkman5482 Oh we do. How do you not see people complaining about there being too many M4s
@@justinworkman5482 Also not every m4 is a rip off. This is legit a copy of the KJW hicapas with Novi bois name on it
dude yes, I actually can't believe all the hype this overpriced KJW is getting. Yeah KJW is good, I love mine to death, but people are acting like this is the next TM...
Novritsch: make Novritsch tape
Me: I’ll take your entire stock
It is a mashup of parts from different KJW Hi Capas
post a link to a similar gun at a similar pricepoint and help people out....
Slide is from a KP08, grip is from a KP06. Outer barrel is the only new thing. Internals I believe are the same in any KJW hi-capa but the purple bucking is from the IPSC series or something like that.
Ok and now go and sum that up how much you would have to pay to buy those parts one by one then built it like the SSP-1. At least it's already built in one piece and you don't necessarily have to upgrade it. And cheaper.
It's $35 more, before shipping, than a KP08 which will perform exactly the same.
Some internal parts have been changed compared to standard kjw hicapas. Just like in the ssg24.
Dude, the feeding issue is your mistake. You have to stack the BBs properly. Fill the gaps within the BBs.
The gun is good
One way to get rid of jams on a airsoft hand gun is have your bbs line up without any gaps or space in your mags.
I want to Camo wrap my gun with Novy boii tape!!
Love you dude!!
wacky wahoo! Love you too!! 💙💪
@@REPTheAirsofter thanks!!!🤣
Buy a skin from silo
Its not a 1911, its a 2011. A 1911 has a one piece frame with separate grip scales. 2011 like this have a polymer grip frame with folded in grip scales which is bolted to a metal frame. Oh n there is no lower frame its just Frame and Slide. As for the gun its such a shame he used that gawd awful slide, no doubt KJW ( the manufacturers ) offered it cheap to get rid of them. Helical Grooved Barrel is a bit naff to but livable with I suppose as it is his signature on rifles apparently. With a nicer more standard slide and a proper slide mount for the Mini Reddot this could have been something quite special.
crewgadjy when they said 1911 it was Killin my brain cells
Nice Video but the amount of clickbait amongst them airsoft youtubers is insane
Looks like i can't bring a modified SSP to milsim!
Was anybody else cringing as he was dry firing the pistols
Love your straight outta the box videos.
Happyfamily1145 should review this box
No,Just no
NO
4:29 she quoted the Sam double snake bite pistol
Soooo now he's using his wife as clickbait. Healthy relationships 2019.
Where is the clickbait
from 0:00 to 9:52 he was fully aware that its not a real gun then at 9:53 he seemingly forgot for a while 😂😂
Lol you’ve been playing Airsoft for how long? And you don’t know how to make sure your bbs are double stacked🙃
Was thinking the same and i dont even play airsoft
The feeding bb problem also is a problem on the elite force 1911 tac
is it just me or is Leia older than jet ? like 10 years difference maybe?
Maciej Bruzda it’s the wine
She’s white😬
I know this is two years old video but the mags are jamming because there’s gaps/spaces between the bbs in the mag
Still not as good as my krytac
u sure? how about price?
Still not as good as my krytac
R u sure about that novy Bois guns have mega aimbot
Oof u right my krytac came with wallhacks
@@feedgreedboi8780 oh shet my guy that's pretty serious novy will be jealous
Barrels aren't fluted to be a signature design barrels are usually fluted to take weight off of the gun
Clickbait much? You even have a buzz feed title and stuff. Uncool.
when leah compared it to a dumbell i couldnt stop laughing cuz all i could picture was a group of grandmas using them as speed walking weights
A re-branded over rated KJW Hi-Capa by the looks of it. Added coloured nozzle to make it 'custom' and stamped a Novritsch logo on it. I'm sure lots of fan boys will buy it.
Honestly think i'd rather spend the money on a WE or Armourer Works Hi-Capa and support lots of local airsoft retailers, rather than just one RUclipsr.
The problem you're having with the green gas magazines is not lack of oil. It's an over moulded feed lip which will need replaced for a good one or modified. Otherwise the BB jamming in the mags will keep happening.
The chrono results were on 0.25g BB's which is not what they are meant to be measured with. 0.20g BB's is the chrono standard. Actual results would of been 365/370 fps with co2 and 345/350 fps with green gas. Most sites for cqb in the world tend to have a 1 joule limit of 328 fps. So this renders the pistol completely useless to most countries. (unless the ambient temperature is much cooler. Results would then be lower)
3/10 from me. I expected more customness and maybe a nicer company to make it. KJW is a bit meh.
kj is decent tho, but for his price you can get a tm and some upgrades
@@alvinlam3160 Absolutely correct. KJW pistols are okay with the co2 mags. Green gas is underwhelming in KJW pistols. I'd much prefer a WE or AW pistol as they shoot awesome on green gas.. Especially the higher PSI stuff like Nuprol Red Gas or similar. TM stuff is overpriced for what you get in all honesty.
KJW is decent but not something you'd expect from a Guicci RUclipsr brand. I was expecting maybe a WE/AW base gun with an upgraded hop unit or something to shoot accurately like a TM. You can run those on gas or co2 also. Must of been a pricing issue or maybe lack of knowledge in the pistol world on his behalf?
Maybe stick to sniper rifles Novritsch! :D
the gas mag doesn't work because you need 0.28-gram bbs he says that in the academy
BB weight has nothing to do with it.
It does not come from Europe its from Taiwan.
2:36 My mans is trying to secure that ps5. Hang in there brother
Demonetized for showing how to take apart a gun. Rip
This video has 2 ads on it.
Isn't the feeding issue because that little brass ring on the back of the mag is loose and needs to be tightened as per any gas fed magazine. Same for the co2. Correct me if I'm wrong
When your channel dies
The red dot is made by Canis Latrans. Novritsch did a review of a scope with this red dot mounted on top
I need one
Hudson Megeath Waste of money
Ruski Airsoft its worth it for a reliable hand gun that will last
Hudson Megeath Buy a KJW instead. Same shit but 50 dollars less.
@@hudsonmegeath2677 might as well get a kjw hicapa
Ruski Airsoft but you feel special using a pistol novitsch uses
The BBS got stuck because of the places where the wasn't any BBS you have to put them in cross line
jets balding
with the BB's getting stuck, i had the same with my WE Glock 17, the plastic guider at the top of the mag doesnt really fir the rest of the mag so when the spring pushes bb's up they get stuck under the plastic guider. i fixed that by filing the edge of wich worked