𝐋𝐢𝐧𝐞 𝐁𝐚𝐥𝐚𝐧𝐜𝐢𝐧𝐠 | Production Line Balancing ? | Assembly Line Balancing in operations management
HTML-код
- Опубликовано: 16 июл 2024
- #LineBalancing or Assembly line balancing is a production strategy in operations management. Line balancing in operations management is done match the production rate to the Takt Time. It is also known as Production line balancing.
🎭 𝐒𝐮𝐛𝐬𝐜𝐫𝐢𝐛𝐞 𝐦𝐲 𝐘𝐨𝐮𝐓𝐮𝐛𝐞 𝐂𝐡𝐚𝐧𝐧𝐞𝐥 : / digitalelearning
📹 𝐁𝐞𝐬𝐭 𝐋𝐞𝐚𝐧 𝐒𝐢𝐱 𝐬𝐢𝐠𝐦𝐚 & 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐓𝐨𝐨𝐥𝐬 𝐕𝐢𝐝𝐞𝐨𝐬
--------------------------------------------------------------------------------
🎬 Lean Manufacturing : • What is Lean Manufactu...
🎬 Lean Vs Six Sigma : • Lean vs Six sigma (6 s...
🎬 Value Stream Mapping : • What is Value Stream M...
🎬 Quality Function Deployment : • What is Quality Functi...
🎬 Six Sigma (6 Sigma) : • Six Sigma (6 sigma) | ...
🎬 8 Lean Manufacturing wastes: • 𝟴 𝗪𝗮𝘀𝘁𝗲𝘀 𝗼𝗳 𝗟𝗲𝗮𝗻 𝗠𝗮𝗻𝘂𝗳...
🎬 5S Methodology: • What is 5s methodology...
🎬 GEMBA Walk : • What is Gemba : Where ...
🎬 SIPOC Diagram: • What is SIPOC diagram ...
🎬 Lean Pull vs Push : • Lean Pull vs Push | Ju...
🎬 POKA YOKE (Mistake Proofing): / v0ygowej2k
🎬 Just in Time: • What is Just-in-Time (...
🎬 TQM - Total Quality Management : • What is TQM (Total Qua...
🎬 TPS - Toyota Production System : • What is Toyota Product...
🎬 TPM - Total Productive Maintenance : • What is TPM -Total Pro...
🎬 7 Basic Quality tools : • What are the 7 basic q...
🎬 FMEA (Failure Modes & Effect Analysis) : • What is FMEA (Failure ...
🎬 Fishbone Diagram : • What is Fishbone Diagr...
🎬 5 Why Root Cause Analysis: • 5 Whys Root Cause Anal...
🎬 Quality Assurance vs Quality Control : • What is the difference...
🎬 Plan Do Check Act (PDCA cycle) : • What is PDCA - Plan D...
🎬 Critical To Quality in Six Sigma: • What is Critical To Qu...
🎬 Drum Buffer Rope & Theory of Constraints : • What is Drum Buffer Ro...
🎬 Six Sigma Process Variation : • What is Six Sigma Proc...
🎬 Six Sigma Defect Metrics (DPU, DPMO & PPM) : • What is Six Sigma Defe...
🎬 Balance Scorecard ? • What is Balance Scorec...
🎬 Key Performance Indicators (KPI) : • What is Key Performanc...
🎬 New Product Development Process : • 𝐍𝐞𝐰 𝐏𝐫𝐨𝐝𝐮𝐜𝐭 𝐃𝐞𝐯𝐞𝐥𝐨𝐩𝐦𝐞𝐧...
🎬 Product Life Cycle (PLC) stages : • What is Product Life C...
🎬 Fault Tree Analysis: • What is Fault Tree Ana...
🎬 7 basic quality control tools: • What are the 7 basic q...
🎬 5W1H : • What is the 5W1H Metho...
🎬 8D Problem solving methodology: • What is 8D Problem sol...
🎬 One Piece Flow Vs Batch : • One Piece Flow Vs Batc...
🎬 Line Balancing: • 𝐋𝐢𝐧𝐞 𝐁𝐚𝐥𝐚𝐧𝐜𝐢𝐧𝐠 | Produ...
🎬 Heijunka : • What is Heijunka in L...
🎬 Muda, Mura & Muri: • Muda, Mura & Muri - Le...
🎬 Takt Time vs Cycle Time vs Lead time : • Takt Time vs Cycle Tim...
⏱️ 𝑻𝒊𝒎𝒆 𝑺𝒕𝒂𝒎𝒑 ⏱️
-------------------------------
0:00 - Introduction
0:18 - What is Line Balancing ?
2:43 - Line balancing example
8:12 - Benefits of Line Balancing
📢📢 📢📢 𝐅𝐨𝐥𝐥𝐨𝐰𝐬 𝐮𝐬 𝐨𝐧 𝑺𝒐𝒄𝒊𝒂𝒍 𝑴𝒆𝒅𝒊𝒂
-------------------------------------------------------------------------
🐦𝐓𝐰𝐢𝐭𝐭𝐞𝐫 : / digitalelearni1
📸 𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 : / digital_elearning
📩 𝐓𝐞𝐥𝐞𝐠𝐫𝐚𝐦 : t.me/digital_e_learning007
🙋🏻♂️ 𝐏𝐢𝐧𝐭𝐫𝐞𝐬𝐭: / digitalelearning007
🙋🏻♂️ 𝐋𝐢𝐧𝐤𝐞𝐝𝐈𝐧 𝐏𝐚𝐠𝐞: / 55180987
🙋🏻♂️ 𝐅𝐚𝐜𝐞𝐛𝐨𝐨𝐤 𝐏𝐚𝐠𝐞 : / digitalelearni1
💌 𝑪𝒐𝒏𝒕𝒂𝒄𝒕 𝒖𝒔 : digital.e.learning007@gmail.com for any business/ promotion queries.
✍️ 𝓓𝓲𝓼𝓬𝓵𝓪𝓲𝓶𝓮𝓻:
Copyright Disclaimer under section 107 of the Copyright Act of 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. The information contained in this video is just for educational and informational purposes only and does not have any intention to mislead or violate Google and RUclips community guidelines or policy. I respect and follow all terms & conditions of Google & RUclips.
𝐂𝐨𝐦𝐦𝐨𝐧 𝐊𝐞𝐲 𝐬𝐞𝐚𝐫𝐜𝐡 𝐫𝐞𝐥𝐚𝐭𝐞𝐝 𝐭𝐨 𝐭𝐡𝐢𝐬 𝐭𝐨𝐩𝐢𝐜 :
----------------------------------------------------------------------
#Digital_e_Learning #LineBalancing #Bottleneck #OperationsManagement #LeanSixSigma #SixSigma
assembly line balancing in operations management
production line balancing
line balancing
assembly line balancing
line balancing example
line balancing is
line balancing in operations management
assembly line balancing example
line balancing meaning
define line balancing
👀 Hello Friends, 𝐉𝐨𝐢𝐧 my 𝑺𝒐𝒄𝒊𝒂𝒍 𝑴𝒆𝒅𝒊𝒂 𝑳𝒊𝒏𝒌 for regular updates:
------------------------------------------------------------------------------------------------------------------
📸𝐈𝐧𝐬𝐭𝐚𝐠𝐫𝐚𝐦 : instagram.com/digital_elearning/
🐦𝐓𝐰𝐢𝐭𝐭𝐞𝐫: twitter.com/DigitalELEARNI1
📢𝐓𝐞𝐥𝐞𝐠𝐫𝐚𝐦 : t.me/digital_e_learning007
🙋🏻♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐋𝐞𝐚𝐧 𝐬𝐢𝐱 𝐬𝐢𝐠𝐦𝐚) : whatsapp.com/channel/0029VaAUuqs4inooet3e4S3O
🙋🏻♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐒𝐢𝐱 𝐒𝐢𝐠𝐦𝐚 (𝟔σ ) : whatsapp.com/channel/0029VaEWKWbIiRovZpAduc0p
🙋🏻♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐒𝐭𝐚𝐭𝐢𝐬𝐭𝐢𝐜𝐬 & 𝐑𝐞𝐬𝐞𝐚𝐫𝐜𝐡) :whatsapp.com/channel/0029VaAGwzTDJ6H9S5Q4Ow0m
🙋🏻♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐏𝐫𝐨𝐣𝐞𝐜𝐭 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧𝐭) :whatsapp.com/channel/0029Va8slQdEAKWAhXoQK13B
🙋🏻♂𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩 (𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐀𝐬𝐬𝐮𝐫𝐚𝐧𝐜𝐞 & 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐂𝐨𝐧𝐭𝐫𝐨𝐥) :whatsapp.com/channel/0029VaAKJBGKGGGDjcK4mw2h
Unit of Takt time can only be min hr not unit per hour. Takt time =Available time/ customer demand i.e. 480/160=3 min .
Yes correct
It really helped me a lot to understand line balancing❤️
Glad to know Sanju ☺
Whole world's supreme creator bless you all always and you all remember him always with your pure heart.
Thanks 🙏
good evening sir, your explanation is good, but a slight error is there, the formula for takt time is --> net time available/ customer demand, T = Ta/D, but you have used the inverse of that. Moreover, calculating the unit required to produce in one hour can be calculated by the 60/minutes required to produce one unit. And that will the number of units that must be produced in one workstation.
It's too late for me to see this useful information video... I loved your way of explanation. Thanks for the video and keep on share these type of useful information. Thank you...
Thanks a lot Shiv for such kind words. ,😍😍
Its never too late.👍👍
M
It did really helped me to understand basics.
Thanks 😊
The best teaching method from the other
Thank 😊 Tesfaye
we dont have budget for new machine & also no space for that installation, so in that how can increase the productivity on existing machine ?
thank you it was really clear.
You are welcome Yonatan 😊
Perfectly explained!!!
Glad it was helpful!
It is really informative.
I have a suggestion..Now a days organisations are looking for line balancing with less investments. Before planning to install new machines we have to look how we can reduce the processing time of machine B&C with MTM or any other tools.
Thanks
Great suggestion! Vishnu
How we can reduce worker and machine to increase productivity
Awesome video. Thank you
Glad you liked it!
well exokained
Thanks
thank you for teaching
You are welcome
Thanks you so much .
dear Bali
Thank you so much 😀
Thank you mate
Welcome Gaurav 🤗
Thank you for this video is very useful
Awesome, Thank you!❤
Excellent
Thank you so much 😀
Nice learning
Thanks a lot
Great video. I'm interested in what program you used to make the video, the animations I mean.
Thanks
I use Powerpoint
GREAT VIDEO, I shared with a friend who has TERRIBLE bottlenecks at their company.
Thanks 😊 Manuel
You can also watch this detailed video on Bottle neck Analysis ruclips.net/video/ZjlQeBpVk70/видео.html
Can you please make a video on AQS six Sigma green belt certification also.
Thank you
Sure Sachin. I will add
Check out new video on Bottleneck :
-------
🎬 𝐘𝐨𝐮𝐓𝐮𝐛𝐞 𝐯𝐢𝐝𝐞𝐨 𝐥𝐢𝐧𝐤 ruclips.net/video/ZjlQeBpVk70/видео.html
--------
Sir cost is increased
How to avoid without increased cost
if we increase the machines then we have to deploy that workforce also which in turn will increase our costs. how can we tackle this?
Thanks 😊
Can i know the tool u used to create video i want create the sam for my project
I created this in PowerPoint
Good video dear sir make a video on bottleneck with example asap.
Thanks Manjeet 😊
Vinod, here is your video on Bottleneck :
-------
🎬 𝐘𝐨𝐮𝐓𝐮𝐛𝐞 𝐯𝐢𝐝𝐞𝐨 𝐥𝐢𝐧𝐤 ruclips.net/video/ZjlQeBpVk70/видео.html
--------
It's mean for balacing this we have to install 4 new machines
Imaginary explanation plz give some real world examples
Good explanation
Thanks 😊 lot. Appreciated
Check out new video on Bottleneck :
-------
🎬 𝐘𝐨𝐮𝐓𝐮𝐛𝐞 𝐯𝐢𝐝𝐞𝐨 𝐥𝐢𝐧𝐤 ruclips.net/video/ZjlQeBpVk70/видео.html
--------
Which subject it is
Mohit: Line balancing comes under Operation management
Bhai Apki OEE wali video nhi mil rahi h
I will be adding new video on it soon.
@@DigitalELearning plz upload as soon as possible
Thanks
Earlier at 2:13 minutes you said Takt time = Available time / customer demand but while in example you explained the other way 160 (Customer demand) / 8 (Available time ) = 20. So what is correct actually?
20 units must be produced /hours in order to meet 160 units of customer demand.
Here 8 hours is the max available time that we have in a day and 160 units/day is the demand. Just follow the example
Sir hindi me padhaye
Chandra: this is a animated video which is self explanatory and independent of launguage
Line Balancing should be improving productivity and COST-EFFICIENCY in mass production process. You presentation is not cost-effective.
feedback noted Sir
Sir aap bhot gndha pdhate ho
What did you not understood in this video??