LoLin NodeMCU V3 ESP8266 Firmware Flashing | AT Firmware V1.3.0.2
HTML-код
- Опубликовано: 23 мар 2019
- LoLin NodeMCU V3 ESP8266 Firmware Flashing | AT Firmware V1.3.0.2 . In this project video i use LoLin NodeMCU V3 ESP8266, NodeMCU Flasher, AT Firmware V1.3.0.2 and Arduino IDE 1.8.9.
Download NodeMCU Flasher : github.com/nodemcu/nodemcu-fl...
Download AT Firmware V1.3.0.2 : www.electrodragon.com/w/File:...
*Important
------------------
Sending AT commands using Arduino Serial is not necessarily supported by other firmware. Learn first what firmware you will use.
------------------
***********************************************
Thanks for watching & don't forget to like, comment and Subscribe...
***********************************************
For other video tutorials on this channel, please see this playlist:
- Basic4Android (B4A) Tutorials : • Basic4Android (B4A) | ...
- Electronics Tutorials : • 3 LED Flip Flop
- Arduino Tutorials : • Arduino | Scrolling Te...
- Great Cow Basic Tutorials : • Great Cow BASIC with A...
- Bascom Avr Tutorials : • Bascom Avr | How to Se...
- VB .NET Tutorials : • Visual Basic .NET | ...
***********************************************
Download Arduino IDE : www.arduino.cc/en/Main/Software
***********************************************
Music Background :
Song: Ikson - Do It (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
Far Away by Declan DP / declandp
Licensing Agreement 2.0 (READ)
www.declandp.info/music-licensing
Music promoted by Audio Library • Far Away - Declan DP (...
*********************************************** 
Наука
The link to download "AT Firmware V1.3.0.2" in the video description is no longer working, so use this link to download "AT Firmware V1.3.0.2" : forum.arduino.cc/t/nodemcu-esp8266-arduino-serial-at-command-code-problem/617095/12
Thank you so much!
I've been sitting in front of my computer for 5 hs trying to make my NodeMcu work! and it did thanks to you.
You're welcome 🙂.
Good job 👍.
thanks for the good tutorial, finally my NodeMCU can be used again!
I couldn't make it before watching your video. Thanks a lot !
You are welcome :-)
Thanks dude!!! I tried to do it for 3 hours, thx
Bro my flasher didnt start the flash at all and my nodemcu led onboard doesnt blink at all why is it happening
you are the best
Thank you :-)
is it necessary to hold down the flash button?
Bang tempatku lampunya kedip tapi gak muncul mac addresnya
is it connect space in ssid??
Really very nice video, but I was not happy with total views, you deserved more views. All the best my friend.
Thank you very much my friend :-)
very helping video, thank you
You're welcome :-)
pak ketika saya pencet tombol reset kenama tidak muncul tulisan "wifi connected" dan "wifi got ip" ??
In 2023 still ok. You must found software in web (on google disk). On first time it didnt work, i did one more flash and now it works.
Program stops at Begin find esp8266, know why? Says require wifi and waiting on MAC?
Did you ever figure it out because its happening to me to
I finished following your video ...but when I press the reset button, the serial monitor displays that "WiFI is disconnected" ... how do I fix this ??
Please help ...
Does your project need Firmware ?
sir this page has been deleted "Download AT Firmware V1.3.0.2 : @t" can you updated the link?
Try downloading here: domoticx.com/esp8266-wifi-at-firmware/
File AT Firmware V1.3.0.2 kehapus mas...
Sir cant detect the barcode
Pls help
thanks, very good
You are welcome :-)
Error:Serial port connect failed, please check it. can you tell me what to do about that. i have an esp8266 and it is cp2102. i am trying to do a wifi jammer
If you are using a "windows" operating system make sure that you have the cp2102 driver installed.
why do u need to flash ?
can i do with baud rate 9600? because on the back of my module they specify to use 9600
I don't know, but.... because any doubt, you can try at both speed.
@@blacksheep425 yeah ... true , for firmware we can choose any speed but for uploading code through UART , have to select 9600
@@hetshah9742 nice information. Thanks.
Kenapa waiting MAC terus ya
bang kok saya udah nyoba gabisa ya ga ceklis tapi malah strip merah gitu gakeluar apa-apa
gatau bang
permisi bang numpang tanya, saya udah ikutin stepnya dan berhasil flashing tapi ketika dipencet reset cuma muncul tulisan nggak jelas ya? dan nggak bisa di AT command juga. Saya make NODEmcu v3 lolin juga, kenapa ya mas? terimakasih mas.
Pastikan bahwa baudrate yang kamu gunakan di serial monitor bernilai sama dengan yang ada pada video.
"Error:Serial port connect failed, please check it.
Note:Detect serial port changed.
Note:Detect serial port changed.
Note:Auto MAP serial port.Port-->COM11
Note:Serial port connected.
Note:Begin find ESP8266.
Note:ESP8266 ACK success.
Note:ESP8266 ACK success.
Error:Set ESP8266 Address timeout."
Bang, minta tolong bisa kirim file firmware nya.
why we use Firmware Flashing | AT Firmware V1.3.0.2?
There are lots of firmware for NodeMCU, I use AT Firmware only as an example for how to Flash Firmware at NodeMCU.
For additional information, AT Firmware V1.3.0.2 is used so that the Arduino Serial Monitor or other Serial Monitor can send AT Command to NodeMCU for the Command to be responded by NodeMCU. Because if you use the factory default firmware, the AT Command sent will not be responded to by NodeMCU. As is the case with my NodeMCU, I don't know whether this case also happened in another NodeMCU.
Bg kok gua loading nya lama dan gk muncul muncul ,tu gmna y ,mohon d jawab
Pastikan kalau kamu sudah mengikuti semua step seperti pada video. Pastikan juga kalau kamu menggunakan NodeMCU yang sama dengan yang saya gunakan. Karena ada berbagai macam NodeMCU yang ada dipasaran.
Can i flash this firmware for esp12e but not Lolin?
I'm not so sure, but you can try it, because I only tried this on LoLin NodeMCU ESP8266
@@utehstr okay thank you so much. I've just ordered esp12e today
Great your movie.
Thank you :-)
Pls rtl8720, 5G its possible for esp2866???
NO
Cant find the port, why?
Have you installed the driver ?
V1.3.0.2 AT Firmware.bin.zip has been deleted in this page. Can you help me?
Look in the comments column, there is someone who shared the firmware file.
should us flash our nodemcu v3 by AT command?
It doesn't have to be, NodeMCU is flashed as needed.