The $4 NodeMCU ESP8266 Wi-Fi Jammer Setup! (iOS & Android)
HTML-код
- Опубликовано: 3 сен 2018
- Hi guys, Tech James here,
For this tutorial, I’ll show you guys how to turn a NodeMCU ESP8266, into a Wi-Fi Jammer/Deauther. Keep in mind this only works on networks that use 2.4G Wi-Fi. This product was send to me by GearBest.
This video is for educational purposes only.
➤ (NodeMCU ESP8266): www.gearbest.com/transmitters...
➤ (ESP8266Flasher): github.com/nodemcu/nodemcu-fl...
➤ (ESP8266 Deauther BIN Files): github.com/spacehuhn/esp8266_...
➤ (Drivers): www.silabs.com/products/devel...
Music: Chill - Lofi-Fi Hip-hop ( • Video )
Please Like + Subscribe
This video can be removed, contact me directly: techjames1718@outlook.com
- Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research.
creativecommons.org/licenses/... - Хобби
2 years later and this thing still working. you had helped me a lot with my neighbours.
Lmfao
Me too i hate mine as well!
Help
@@Jeyhailio How can we help you, provide us with some information first
@@proxyhx2075 My esp8266 flashes when I press the flash button but then gets stuck on loading and always fails to flash properly. Do you know how I could fix this? I've installed the drivers many times already and done everything as shown but it doesn't want to flash.
Thank you so much for this video. I personally have been struggling to get it up and running until now.
ive been working on my board for 2 hours cuz i couldn't get it to work and then i watch this and find out that i needed the driver ty brov
This is so much better than studying the code from scratch. Thank you.
HELLOOOO THANK YOU SO MUCH!!! THIS IS REALLY HELPFUL AND IT WORKS PERFECTLY.
after 6 years, Its still works PERFECTLY! Thank you for everything
Helo bhai reply me
You are the best! First tutorial that actually works!
Finally got it working. Great video this - appreciate it!
Could u help me please
I followed each step and it works, i love you
your tutorial is so much helping thanks::))
The way to fix the pwned not showing up is by doing all the same steps but change the frequency to 40. It worked for me thanks!
Also, I switched the USB to a different port and it appeared after. A USB 2.0 if you have it.
@@PilaPlanet mine dont work help me
Mine is showing up as farylink
usb com port fix how can i solve
@@chasedavis2358 mine dose to and when I connect to it it won’t let me access the web
i have had so many problems until now! thank u so much, your video was easy to understand and most helpful.
Excellent tutorial man!
Thanks!🍻
How didyou do man
Owsm dude !! Finally its working
grate start for my upcoming project thanks.
i watch many videos but one from these is helpful for me and its your videos . really thanskful to you , you are amazing
Hello, congratulations on your construction. I'm doing one of these with a nodemcu, I2C 1306 display and neopixel led and buttons, but the led does not light up and the buttons on the same pins as yours do not respond, I use the spacehuhn deauther code, I cannot make it work, I am not good in code with arduino, could you help me? I already searched Aconfig.h, but I don't know what else to enable there to work. Thanks
Thank you I tried this 3 other times with different walkthrough and none worked but this one
Great video, Thank You 🤩 👍🏻 Do you know if you can extend the Range of this board ? Like to work say a distance of 5-10 meters? If I soldered a thin piece of wire, maybe about a meter long onto the Aerial on the board ?
Any Help or advice appreciated 😁🤞🏻 Thanks Again 👍🏻
Working perfect thanks 👍🏼
I live in Bangladesh. How many versions of the board can work with the files you provided ??
Am I the only one that just wants to bring this to school 😆
you can get arrested
And very illegal
@@Smellyfoot71 What are chances that they actually discover that he is jamming a school network? Like, none?
I did this already
And I got 20 out of 20 in computer lessons when I told them it was me. Note: A Year ago, I almost needed to re-do the class because I am a scrub with computers
Can i have a question.
I normaly connect to IP And than go to settings And set "hidden" than i reboot And i dont know how to connect to my pwned if IT not show.
Please help
My Node doesn't seem to generate wifi. I can connect but cant go to the IP address in the web address bar because the pwned network isnt generating wifi? Help?
LOL no matter what I search for your name is always there xD you rock dude hahaha
The beacon attack works here, but the deauther stucks in 20 pkts and doesnt work, i tried with FIVE differents esp 8266, and differents acess points...
ONLY TOUR METHOD WORKED TYSMMMMMMMMMMMMMMMMMMM!!!!!!!!!!!!
Hello tech James, I have performed the download flash and I do see the lower green symbol on the left side, but I do not see the "pwned" on the wifi section. Am I doing something wrong?
i got the driver , did everythig but the flasher don't detect the node mcu. What can i do??
Can you use a mac to set this up instead of a pc? Plz help
thanks for this video help to acheive some working result
I have a very curious problem, I managed to make it work as you showed in the video, also when I do the attack, all my mobile devices within my network are disconnected (it works). But even though the attack is on and all my mobile devices are disconnected, my laptop can still use the internet. Is this because it has more power to connect or something like that?
@R R ohh, thanks for the information, with reason with some devices if it worked and others not.
Hibtech james you are a great teacher i followed all your steps but when i get the comport box up its on comport1 were yours is on 3 and when i press the flash button its not working its saying no wifi even though there is please please can you help me many thanks
did you find a fix for this?
Pawned network says @Log in to connect to the internet! when i click it hotspot log in window pop up with error 404 page not found!
Does it also capture handshake while deauth ? or if someone tries to connect to a cloned AP, does it capture the creds ?
dont think so - for that i would recomend you to use kali or parrot os and do it manually in the terminal
You can also connect the Deauther to a power bank instead of your phone to power it!
We know...
What a bout a charger
@@najj71 same goes for that
The flash software still does not see it. What do I do>?
Hey I flashed it but pwned network is not showing any help?
Nice vid btw!
I just got one yesterday an it work for just a bit an when i got home from work, it doesn't work any more. Any tips on how to reconnect to it its not show up at all
Hi. I don’t have that strange thing to connect it to android, how can I do it without it?
Surely a way to overcome this is if someone was to connect an Ethernet/LAN cable from their wireless router to their laptop and in that way they couldn’t get kicked off the Wi-fi network?? Or am I wrong??
You're right
Not working for me :/ Deauth wont work on any Network but it says Attack is Active. Any fixes?
I have a question. I did all the step and it works but only on camera that have wifi. LIke phones and computer does not pop up at all. Can anyone help?
Good day sir, why I can't connect to pwned network after I flashed? It says authentication problem. Do I need to connect the cable to my phone?
Hi so I have accidentaly changed the bin file on how to open it. It opens with some notepad and just shows random numbers. Can you help me restore the way it opens?
hi quick question if i download the deauther... file it shows up in a txt file. How to open it back to a bin...?
hey is the flasher download only for Mac? im trying to flash this with a Mac
Error:Serial port connect failed, please check it.
Log error after Flash Button step. PLease Help
Evil twins and deauther are unseparated, must be collaborated in operations, right??
How to solve the com 1 problem I don't get any other number
What's the difference between 1mb vs 4mb BIN file? Does it affect to more powerful deauthers?
how large the IPAP or de-authentication packets it sends
(IPAP = Internet Protocal Adress Packet)
after i start attack. it does not work and the network pwned disappears but my internet that i attack is still working. and the only way im able to get the network to comeback up is to reset the device
Hey man great tutorial, once I hit flash the stop button popped up, however nothing was being downloaded to my ESP. The screen kept flashing require (gpio) and require (wifi). Any thoughts?
Under the operation tab: COM Port does it have a choice (ie COM3) if not then...On your computer, go to your device manager and see if you have a PORTS option,click on that to see which com channel you are supposed to use (default I believe is COM 3) if there isn't a PORTS option then you have the wrong USB drivers installed. See, most of these MCUs come UNFLASHED and you won't be able to flash the deauth BIN file without the proper USB drivers and NO Windows will not automatically find it. I had to install Python27 on my system just to get the proper drivers on mine. If you still need help I can find the video I found to set this up. This other info about unplugging and plugging it back in won't matter if you don't have the proper drivers.
@@mthewolf1095 Im having the same problem I have a choice of ports 3,4,5 on the flasher & only 3,4 on the pc. wqould you be able to find that vid please....
BRO i try connected pwned but it give can't connect error is coming plz solve the problems
Many people has published the same code, either with the uploader or with code to upload it throughout Arduino IDE but none of them explained hoy to use it or provide a confusing explanation, you explained it clearly and perfect, , thanks a lot for that!!!
thanks my dude!
I did the same procedure as you but I don't identify the door where I granted the nodemcu, what should I do? (I have windows 7 or must I have the 10)
door or port?, the flash tool needto work, no matter what windows it is
I changed the ssid and password.. But when I tried to connect. It does not work. Ssid is visible but I cannot access.. Can you help me this? Thanks
What I can do if it doesn't come up on the phone?please help me
Thanks, still works perfectly, didn't try deauth function, but if fake wifi points work, i suppose deauth will too. If anyone got troubles with password, it's ''deauther'' not in caps.
Hello, lets say i want to jam two or more wifi, Can i use two ESP8266 at the same time? How do i rename the default name from "pwned" to something else?
Yes,from the website
Do I have to be on the node interner
Thanks Bro Love You
Did I turn on the data when I connected with pwned WiFi
up date got a ESP8266 dose not seem to work with the program no clue why
i cant get on the attack website it says connection refused
Will all the downloading also work on a MAC ?
What is the max range this will work? thank you
can a wifi camera connected to a wifi network be blocked and how?
nice very helpful ! : )
the blue light turns on and doesnt turn off please help
Can I hook it up threw my android phone I don't have a pc??
You will have to change teh Hz from 80 to 40 because 2.4ghz supports 40hz not 80hz.. 80hz is for 5ghz wifi.
so thats why it didnt work! thanks
thx
how to change it can anyone tell?
I need to jam my workers' cell when they should be working, and they will not stop. Will this really stop them from using their cell? I hope so. Will the another person know who or what is jammin, and can I still be able to use me own wifi and internet?
You won't be able to use the wifi you're deauthing and you can get arrested for doing it in public places like your work or cafe, etc...
Does it work if I open the browser on PC? Please anybody answer
What's the difference between 1mb bin and 4mb bin? Obviously other than size, does it come with more perks?
In case anyone wondered: "space huhn" means space chicken ("huhn" is German for hen/chicken, pronounced "hoon"). Great tut!
the pwned network said cant connect to this network how to fix
What s the purpose for the second download?
Will this affect a neighbor's ring cameras?
Mine nodemcu jammer works 5 minutes,then restart, whats the problem?
my board is brand new and i exactly followed as you told but mine doesnt go beyond the flash step it just gets stuck there!
@Darrin Were you able to solve the problem?
@Darrin mine does the exact same and did you find out your issue?
It only recieves 2,4 ghz wifi networks, is there an solution or update so you can recieve the other networks too?
nope
How to made wifi repeater with node mcu 8266?
Hi fellow nightowl tinkering around at 4:42 in the morning ;)...
whats the range of this. And is it trackable? Also thank you so much. This is by far the clearest and easiest tutorial on this topic.
Use a wifi extender
@@user-rj6ff8wu6x don't have one
i dont see pawned as a hotspot what should i do?
Is there a way to do all this on a mac?
I bought this recently and I followed all the steps correctly once I plug the device in it comes up as "COM1" and I have no other coms to select and also when I click flash it doesn't even load or give me my mac please help
all you need to do is type COM3
@@Plane_Crazy-sqaud23 i did but it won't flash
I'm stuck at 4:58 I can't seem to find my board it's a Wonolo ESP32, Internet keeps saying how easy it is to setup so far i've spent 4 days on this and still haven't got anywhere. I tried to reboot/reset, no joy
Hello! You have to change the cable you used, it wasn’t working for me however I used an old beats cable and it worked you should hear the connect sound when you plug ur esp in for it to work
how to make public concern for protection against this. What are the possible or initial steps to protect wifi against this attack?
the purpose of this project is to make people realize that u need to upgrade your router and yet some jackass like this guy promote it as WIFI JAMMER even though the creator in the term of service specifically say dont refer to this project as wifi jammer (its pretty good for pranking your friend or getting someone fired tho)
Question about getting a COM Port to appear...I don't see any options in the drop down. Any suggestions?
Same
Would this work with NodeMcu V3 4MB flash ESP8266 12E?
Probably
can you use esp32s for the same?
cool! what's the range?
very very thank you bro
does it work when connected to ethernet cable?
Thank u man!!! All youtube videos about this NodeMcu with Arduino are shit. You are awsome!
this is working. id like to ask though, can we deauth multiple APs in one attack?
yes but it's not recommended