Drew! This video has been the single most important and useful X32 video I have ever seen. Yesterday I had to do soundcheck with an incomplete band lineup (drummer was running late). Luckily I had a Reaper session of previously recorded gigs, so with this method I was able to merge recorded drums and bass with the members present playing live, the show was saved. Thanks again!
Very interesting. One could have recordings of all your common songs and then, when anyone is out, you could fill in whomever is out by only selecting those channels to come back in. Sweet. The click is critical to keep everyone who is live at the same rhythm as the recorded channels.
Drew. You say you want ideas for future videos. Well, here's a tricky one. How to use the Midas DN4816-I (NOT the "O") with the x32, or any AES50 equiped "desk". If you can figure out a solution to this, I'm sure that there are thousands of user out there who are interested.
Drew , I have a great idea for a video , it involves using this X32 as aStand alone mixer for a Drummer. As a Drummer I use to use the Mackie 1604VLZ . So I fairly recently purchased the X32. I did so for many reasons such as, I can make different “kits” ( EQ, dynamics, FX,) name them and use them quickly live or in studio , plus with the SD card I can record quickly and simply to make drum cover videos . So I’d LOVE to see you make a video for a Drummer as JUST A MIXER , not for routing a PA system , just as a pre mixed drum kit to send to FOH . So as a Drummer I can take it to ANY gig and be ready to take off. I hope this makes sense and would LOVE to work with you as I am still stuck on some features. Thanks b
Our X32 does not have this card device installed. Can one be installed? Next logical question, how much? By the way, have you ever experienced a sudden change in an EQ of a mic? We had one that just went 'hollow' all of a sudden, had to EQ it again. Crazy stuff. Thanks again Drew for all your helpful videos. I've got pages of notes that I'm referencing from watching these videos.
Very helpful explanation! The X32 I am currently using only has the USB output and not the SD card slot. Is there a way I can run a click track from a DAW like Reaper into the board through the USB, but still be able to record to the DAW through the USB?
Same question here. But I'll top it up with Ableton, that is linked with the Resolume to control the visuals as well. Aaand how to route the MIDI tracks to guitarists’ multi-effect pedals.
hi Drew I enjoy your videos very much learned a lot about the X32 but we have a problem with our P16 and the Facebook Live. we will have a good mix during sound check and all is good for our worship team the P16 are good. When we start our service and the Facebook Live is on they lose some of there IN Ear mix. We are using Pro Log to go into Facebook. Any suggestion? and thanks again for your videos
Great video. Quick question though... I have a DL 32 into an x32 rack for in ear monitors, into M32c to control FOH. How can I get the SD card audio (in the x32 rack) to play through both mixers so the musicians can hear in their IEM's via x32 rack and the FOH guy still gets the audio via the M32c? Thank you!
Hi Drew, I understand how this would work in a virtual soundcheck. Is there a way to pre-load, save and name (and quickly recall) multitrack backing tracks for a set of music? (Instead of using a playback system?)
Hey Drew, I watched your videos for a long time. Go on, they are very usefull! I have a question on how to route a guitar signal (input 01 on my x32) to my laptop (e.g. DAW = Studio one) use a plugin (e.g. GuitarRig) to transform the signal and route this transformed signal back on my x32 and the PA. How do I do this? I don´t have the X-Live Card. Thank you very much!
You may have covered this, but is there a way to play stems back from a computer, over USB to the x live (Click, pads, backing tracks etc) AND record all to the SD Card? Would it be 8/8 or 16/16 instead of 32/32 ?
Good evening Drew. I have a trouble shoot. Aux sends for a sub. All my xlr buses are full so I’m using aux 1 out to channel 1 on amp then run to sub. How do I set up fader to control sub off of aux 1 fader independently?
Is it possible to take the playback out of the mains so that i can keep house music running and do some headphones mixing/eqing between soundcheck and showtime?
That's a great idea, at least if one's playing with click. I had some issues though, recording both - on SD and via USB - at the same time. Is that normal? Is that not supposed to happen? Or is it because I'm using too big SD cards since each of the two have 128 gigs?
Can I do the same thing mentioned if I have a Dante card instead of the Xlive? Like record the service and then play back the channels I want back into mixer from the laptop?
Good day ... do you have a way to direct message or email ? I have some questions concerning the x-dante card and wondered if we could correspond directly. Thanks and keep posting the great content !!
Drew Just got a M32C and DL32 and put the Xlive card into the M32C. I can record and play back, but the problem is: "No Session Date/Time Stamp" they all say 2000/00/00 and if I record 3 sessions, the 3rd session is now on session 1 and 2. Sessions 1 and 2 are gone. Help!!!! Thank you!
Hey Drew! Can you save these routing combinations, so that you may vary the Card In vs Live In channels according to the current band lineup? E.g. when the sax player is missing, can you recall a routing that was tailored to feature his tracks as a preset?
Very helpful explanation! The X32 I am currently using only has the USB output and not the SD card slot. Is there a way I can run a click track from a DAW like Reaper into the board through the USB, but still be able to record to the DAW through the USB?
@Jimmy Enns What if you played your click track from a general media player out the standard line out of the computer into your aux in on the X32 and then still used your daw via asio / usb?
![Mariah Carey - We Belong Together [American Music Awards 50th Anniversary Special]](http://i.ytimg.com/vi/UnO2m2BEXDU/mqdefault.jpg)
Drew! This video has been the single most important and useful X32 video I have ever seen. Yesterday I had to do soundcheck with an incomplete band lineup (drummer was running late). Luckily I had a Reaper session of previously recorded gigs, so with this method I was able to merge recorded drums and bass with the members present playing live, the show was saved. Thanks again!
Thank you so much for this. It explains something that I had wanted to do but did not think was possible... until you explained how it was.
Very interesting. One could have recordings of all your common songs and then, when anyone is out, you could fill in whomever is out by only selecting those channels to come back in. Sweet. The click is critical to keep everyone who is live at the same rhythm as the recorded channels.
THANK YOU SO MUCH Drew!
Super helpful
Thanks Drew
Thank you so much!
04:58 Playing back from the SD card AND recording to a laptop via USB at the same time is very neat !
Drew. You say you want ideas for future videos. Well, here's a tricky one. How to use the Midas DN4816-I (NOT the "O") with the x32, or any AES50 equiped "desk". If you can figure out a solution to this, I'm sure that there are thousands of user out there who are interested.
pls make a vid about the sd8 and sd16, how to connect, route etc.. ty 👍
Drew , I have a great idea for a video , it involves using this X32 as aStand alone mixer for a Drummer. As a Drummer I use to use the Mackie 1604VLZ . So I fairly recently purchased the X32. I did so for many reasons such as, I can make different “kits” ( EQ, dynamics, FX,) name them and use them quickly live or in studio , plus with the SD card I can record quickly and simply to make drum cover videos . So I’d LOVE to see you make a video for a Drummer as JUST A MIXER , not for routing a PA system , just as a pre mixed drum kit to send to FOH . So as a Drummer I can take it to ANY gig and be ready to take off. I hope this makes sense and would LOVE to work with you as I am still stuck on some features. Thanks b
Hmm 🤔 could you have the click track & bass play back from the Usb thumb drive and then record your live stage sound to the SD card simultaneously???
Can you go over your settings for all your drum mics? Gates(with triggers), Compression, EQ, effects, etc
Can I use USB flash drive to play 2-track program and click while recording 32-track to SD card in X-Live at the same time?
Absolutely. But, you'll need to make sure your 2-channel track on the USB drive is in WAV format at the bitrate set on the console.
Great Video, but can you show us how to save changes to individual chanels selected ie, vocals, drums etc.??????
Thank for that video - so does that also mean, that i can record on SD and have also the separate channels via USB on my DAW for redundant recording?
Our X32 does not have this card device installed. Can one be installed? Next logical question, how much?
By the way, have you ever experienced a sudden change in an EQ of a mic? We had one that just went 'hollow' all of a sudden, had to EQ it again. Crazy stuff.
Thanks again Drew for all your helpful videos. I've got pages of notes that I'm referencing from watching these videos.
Hey Drew can you make video user output section of the mixing board. I would like to learn more about them there are a lot of that I don’t know about.
Very helpful explanation! The X32 I am currently using only has the USB output and not the SD card slot. Is there a way I can run a click track from a DAW like Reaper into the board through the USB, but still be able to record to the DAW through the USB?
Same question here. But I'll top it up with Ableton, that is linked with the Resolume to control the visuals as well. Aaand how to route the MIDI tracks to guitarists’ multi-effect pedals.
Yes, the X-USB card supports 32-in/32-out.
hi Drew I enjoy your videos very much learned a lot about the X32 but we have a problem with our P16 and the Facebook Live. we will have a good mix during sound check and all is good for our worship team the P16 are good. When we start our service and the Facebook Live is on they lose some of there IN Ear mix. We are using Pro Log to go into Facebook. Any suggestion? and thanks again for your videos
Great video. Quick question though... I have a DL 32 into an x32 rack for in ear monitors, into M32c to control FOH. How can I get the SD card audio (in the x32 rack) to play through both mixers so the musicians can hear in their IEM's via x32 rack and the FOH guy still gets the audio via the M32c? Thank you!
What about options to use waves pluggings without the server and/or exp card
Hi Drew .Thank you very much for the videos. Can you show us how to make parallel compression with X32? I have tried it but I got phasing issue!
Hi Drew, I understand how this would work in a virtual soundcheck. Is there a way to pre-load, save and name (and quickly recall) multitrack backing tracks for a set of music? (Instead of using a playback system?)
Hey Drew, I watched your videos for a long time. Go on, they are very usefull! I have a question on how to route a guitar signal (input 01 on my x32) to my laptop (e.g. DAW = Studio one) use a plugin (e.g. GuitarRig) to transform the signal and route this transformed signal back on my x32 and the PA. How do I do this? I don´t have the X-Live Card. Thank you very much!
You may have covered this, but is there a way to play stems back from a computer, over USB to the x live (Click, pads, backing tracks etc) AND record all to the SD Card? Would it be 8/8 or 16/16 instead of 32/32 ?
I’m trying to figure out the same thing…
Good evening Drew. I have a trouble shoot. Aux sends for a sub. All my xlr buses are full so I’m using aux 1 out to channel 1 on amp then run to sub. How do I set up fader to control sub off of aux 1 fader independently?
Is it possible to take the playback out of the mains so that i can keep house music running and do some headphones mixing/eqing between soundcheck and showtime?
Since there are 2 SD card slots.... Could you be playing back from one and recording to the other at the same time?
You said there would be a video about the second compressor on the vocal channel. Can I post this video?
hello Drew, do you happen to know where i can find sample files for an X-USB card?
That's a great idea, at least if one's playing with click. I had some issues though, recording both - on SD and via USB - at the same time. Is that normal? Is that not supposed to happen? Or is it because I'm using too big SD cards since each of the two have 128 gigs?
nice! I never been able to perform laptop recording with my xlive on mx x32 rack... any idea why ?
On the topic of this vid. What do you do for any Monitors/ I.E.M? Thanks heaps!
How can I press play on these tracks if I’m the worship leader on stage. Can these be triggered via the iPad app?
Can I do the same thing mentioned if I have a Dante card instead of the Xlive? Like record the service and then play back the channels I want back into mixer from the laptop?
Good day ... do you have a way to direct message or email ? I have some questions concerning the x-dante card and wondered if we could correspond directly.
Thanks and keep posting the great content !!
Drew Just got a M32C and DL32 and put the Xlive card into the M32C. I can record and play back, but the problem is: "No Session Date/Time Stamp" they all say 2000/00/00 and if I record 3 sessions, the 3rd session is now on session 1 and 2. Sessions 1 and 2 are gone. Help!!!! Thank you!
I had the same issue. you have to set the internal clock on the m32c
Hey Drew! Can you save these routing combinations, so that you may vary the Card In vs Live In channels according to the current band lineup? E.g. when the sax player is missing, can you recall a routing that was tailored to feature his tracks as a preset?
Got it sorted out, it is feasible!
These bassists are always getting sick.
Very helpful explanation! The X32 I am currently using only has the USB output and not the SD card slot. Is there a way I can run a click track from a DAW like Reaper into the board through the USB, but still be able to record to the DAW through the USB?
@Jimmy Enns What if you played your click track from a general media player out the standard line out of the computer into your aux in on the X32 and then still used your daw via asio / usb?