All I can say is "thanks a million!" I was fed up with our quite new "electronic" washing machine suddenly sounding like the house was falling down! I suspected an internal problem with the tub - and your video came right up. I can't thank you enough! You have a new subscriber. 🙂
Thanks Bro! My washer, a Kenmore 80 series is on its last legs. Then I see my next-door neighbor having a brand new washer being delivered. Once the truck left and their old Whirlpool washer was still sitting in their driveway, I went over and asked them if they would mind if I took it to my house (right across the street) because my washer was banging and slamming around during spin cycle. They told me "have at it, we have a new one", So I two-wheeled it across the street, got on RUclips, found your video, and now I have myself a pretty much brand new washer! Thank You, Man You saved me a ton of money and schooled me on how to fix up old washers.! HAPPY NEW YEAR!
I fixed my shocks (suspension rods), by jamming upholstery foam about 2 1/2" thick by 12" square in the corners. It is keeping my machine from violently shaking now. It works very well now. Hope this help others. Make a video and post it. No need to replace the rods!
Did service work for over 10 years in Oklahoma. On almost every brand, and except the Tulsa area I was responsible for the rest of the state. I watched ur video to help me remember how to get the job done. TY it was a very good video.
Thank you so much for taking (YOUR TIME) to show us how to fix this washing machine. I just replaced my shocks and it sounds great. No banging. Thank you. Saved me $500 on a new washing machine for only $30 on Amazon parts
Thank you very much for your help in getting the washer balancing to back new again 😊. With so little parts compared to the old washers, I was wondering if I needed a new one just being over two years old. But thanks to you that was avoided again thank you so much 😊
Very detailed video, better than all those mechanic videos I have a hard time following 😂 thank you for this, thank you for pausing and actually explaining what you’re doing. As for the hook you can use a trampoline hook you can get it basically anywhere
Thanks for creating and posting this video! I just needed to lift the top up so I could retrieve a sock that was trying to escape. Your video made it easy.
I did everything I could, New suspentions rods, new acuator motor, pulled the agitator and pulled all the change out of the drain holes, thought this may help drain.ran diagonsis said lid switch was bad replaced it, bought the new hub nut and wrench but at this point the best decision I have ever made was to load it up and take it to the dump and hurl it out the back of the truck, then went to costco and bought a new one. Happy Wife Happy life.
Thank you so much for this video. I was able to fix our washer that was violently banging and walking across the floor. Ran my towels and it’s nice and quiet! No more run away washer. 😌
Great Video! With your tips and the step-by-step instruction, I was able to fix my washer in 30 minutes! Buy the factory parts, saves money in the long run! Thanks Bro!!!
Man i did the repair with shocks, it took about 15-20min. It worked great for a few days and then the shaking came back! After watching your video I realized i must have done something wrong, so I looked again and I guess one of the plastic pieces came off from the top of the hook, i just put back and added a load, well see if makes a difference.
Just a fyi! You can use the old springs as a hook to pull up to pull up one of the replacement springs. Putting a rag or towel underneath the motor as stated in the video, will aid you in the process. Thanks for the video "Diy Repairs Now".
Thanks brother. This video helped me to get my repairs underway. I have to wait for the dampeners to come in to complete the repair. I will hit the subscribe and like buttons to show my appreciation. Best wishes bro.
This is my exact machine. I just removed the tubs to deep clean, due to years of pet hair build up. 😛. Came out beautifully clean. Now its banging as if the devil is trying to escape hell, via my washing machine. It won’t spin all the water out, so my clothes smell…again. I never knew about testing the pump. I’ll do that, then change the shocks.
@ thank you. I couldn’t make myself pull it apart again. I don’t have anyone to help lift the tub, as my husband and i are disabled. We gave it to someone who can fix it. Thx
Had issue with mine banging and sometimes shutting off in sensing and after wash light lit up it would just stop...all these issues solved by replacing pressure switch clear hose in back had a pinhole where it rubbed against back plate ..Reason for banging never achieved correct water level because of the hole in hose ..took me weeks to figure it out ..diagnostic mode showed f8 e1 so if your getting water from then inlet solenoids ..check the clear hose
When spinning the drum empty at full speed, the inner drum don't shake much, but the outer drum shakes a lot. I'm thinking the inner drum is out of round, and transmitting force to outer drum. Does that make sense?
I’ve replaced all 4 rods and even changed the hub but it doesn’t stop the tub from swaying side to side. So when it does a spin cycle it bangs around like crazy. Any other suggestions?
For some reason the last balance code light come on but don't flash they stay all on then after 1 a minute it shuts off and still shaking like crazy and the spring are new if I sit on it it will do the spin but otherwise is like coming apart and course don't finish the spinning
When I turn in the cold water it spills right into the tub without stopping, is it supposed to do that? Did I mess something up? It’s connected blue to blue. Someone pls help
If You Have a Wash Plate or Impeller Instead of an Agitator, You Can do the Test By Grabbing the Sides of the Tub and Pushing Down. Here is a Video as Demonstration: ruclips.net/video/NRzb_CxZk8Q/видео.htmlsi=bANTwAsGaZ1bpI5a&t=41
In the Video, We Show How You Can Know if the Suspension Shocks are Bad, However I will Leave here the Link to How to Test Them on a Similar Model. Hope this Helps, Thanks for Watching! ruclips.net/video/einTTJy-ep4/видео.html
If You are So Bothered By My Video, There is a free thing Called Exiting Out and Finding Another Video, Which You are More than Welcome to Try, Instead of Coming to the Comments Section and Leaving Rude Comments. Thanks for this, Have a Good One.
The rod system is the problem, replacing them is a very short lived fix. Shim the tub against the cabinet with foam or polystyrene . The most horrible washmachine design ever😂
All I can say is "thanks a million!" I was fed up with our quite new "electronic" washing machine suddenly sounding like the house was falling down! I suspected an internal problem with the tub - and your video came right up. I can't thank you enough! You have a new subscriber. 🙂
Very helpful what a great step by step power point instruction,thanks again!
Glad it was helpful! Thanks for Watching!
Thanks!
Thanks Bro! My washer, a Kenmore 80 series is on its last legs. Then I see my next-door neighbor having a brand new washer being delivered. Once the truck left and their old Whirlpool washer was still sitting in their driveway, I went over and asked them if they would mind if I took it to my house (right across the street) because my washer was banging and slamming around during spin cycle. They told me "have at it, we have a new one", So I two-wheeled it across the street, got on RUclips, found your video, and now I have myself a pretty much brand new washer! Thank You, Man You saved me a ton of money and schooled me on how to fix up old washers.! HAPPY NEW YEAR!
That is Great to Hear! I am Glad My Video Was Helpful to You in Fixing your New-to-You Washer! Thanks for Watching and Happy New You as Well!
I fixed my shocks (suspension rods), by jamming upholstery foam about 2 1/2" thick by 12" square in the corners. It is keeping my machine from violently shaking now. It works very well now. Hope this help others. Make a video and post it. No need to replace the rods!
Might try this to help out my parents free is always an amazing option
Did service work for over 10 years in Oklahoma. On almost every brand, and except the Tulsa area I was responsible for the rest of the state.
I watched ur video to help me remember how to get the job done. TY it was a very good video.
@@stevenharper2926 I think you need to post the video on this 😅
@@stevenharper2926 hey post your video please
@@stevenharper2926 can you send pics of placement of foam
Thank you so much for taking (YOUR TIME) to show us how to fix this washing machine. I just replaced my shocks and it sounds great. No banging. Thank you. Saved me $500 on a new washing machine for only $30 on Amazon parts
You're welcome! Happy to Hear that You Found My Video Helpful!
Thank you very much for your help in getting the washer balancing to back new again 😊. With so little parts compared to the old washers, I was wondering if I needed a new one just being over two years old. But thanks to you that was avoided again thank you so much 😊
You are Very Welcome! I am Glad My Video Helped!
Very detailed video, better than all those mechanic videos I have a hard time following 😂 thank you for this, thank you for pausing and actually explaining what you’re doing.
As for the hook you can use a trampoline hook you can get it basically anywhere
You're welcome, glad my video was easier to follow than the other mechanics!
Thanks for creating and posting this video! I just needed to lift the top up so I could retrieve a sock that was trying to escape. Your video made it easy.
Happy to Hear it! Thanks for watching!
I did everything I could, New suspentions rods, new acuator motor, pulled the agitator and pulled all the change out of the drain holes, thought this may help drain.ran diagonsis said lid switch was bad replaced it, bought the new hub nut and wrench but at this point the best decision I have ever made was to load it up and take it to the dump and hurl it out the back of the truck, then went to costco and bought a new one. Happy Wife Happy life.
Mine was hole in the pressure switch hose
Thank you so much for this video. I was able to fix our washer that was violently banging and walking across the floor. Ran my towels and it’s nice and quiet! No more run away washer. 😌
Fantastic! Glad to hear you found my video Helpful! Thanks for Watching!
Great Video! With your tips and the step-by-step instruction, I was able to fix my washer in 30 minutes! Buy the factory parts, saves money in the long run!
Thanks Bro!!!
Nice work! Happy to hear My Video Helped You in Getting Your Washer up and Running Again!
Great video! Very informative and clear to understand. Thank you !
Glad it was helpful! Thanks for the Support!
Man i did the repair with shocks, it took about 15-20min. It worked great for a few days and then the shaking came back! After watching your video I realized i must have done something wrong, so I looked again and I guess one of the plastic pieces came off from the top of the hook, i just put back and added a load, well see if makes a difference.
@@russellharris1299 Updates?
@ it worked better, the shaking was still there. Ended up getting an other washer.
This saved me tremendously! Thank you!
Glad My Video helped you Fix Your Washer! Thanks for Watching!
This was very helpful. Thank you!!
Glad it was helpful! Thanks For Watching!
Good information and illustrations for DIY
Many many thanks! Glad You liked my Video!
This is a great video! Great explanations, good camera work. I'm ready to do the repair myself!
Happy to Hear this! Glad to Hear You found my Video Helpful!
Lifesaver bro. I was about to buy a new washer 😂😂😂😂😂😂
Glad I saved You From Having to Buy a New Washer! Thanks for Watching!
You’re the man, god bless you
You’re Welcome, Thanks for the Support!
You just earned yourself a subscriber my friend
Thank You for the Support!
Just a fyi! You can use the old springs as a hook to pull up to pull up one of the replacement springs. Putting a rag or towel underneath the motor as stated in the video, will aid you in the process. Thanks for the video "Diy Repairs Now".
I am glad my video was Helpful, Thanks for the Tips and the Support! Very Much Appreciated!
Thanks brother. This video helped me to get my repairs underway. I have to wait for the dampeners to come in to complete the repair. I will hit the subscribe and like buttons to show my appreciation. Best wishes bro.
Awesome! Glad My Video Was Helpful. Thank You So Much for the Support, It is Very Much Appreciated!
Thank you!
You're Welcome!
very informative
This is my exact machine. I just removed the tubs to deep clean, due to years of pet hair build up. 😛. Came out beautifully clean. Now its banging as if the devil is trying to escape hell, via my washing machine. It won’t spin all the water out, so my clothes smell…again. I never knew about testing the pump. I’ll do that, then change the shocks.
@@kristyb39 If your washer isn't spinning your clothes dry, your hub is likely worn.
@ thank you. I couldn’t make myself pull it apart again. I don’t have anyone to help lift the tub, as my husband and i are disabled. We gave it to someone who can fix it. Thx
When finished installing the shocks
there is a small cutp about six
inches above the shock holder should this be pushed down on the rod ?
Just leave it where it is from manufacturing 👋
What is the purpose of this little cup@@DIYRepairsNow
I changed the shocks and it still shakes violently whats the deal
Same here.
I was reading up on it myself!! It said the washing machine may bad counterweight spring and damping straps
Great Video, thanks for your help
No problem! Glad it was Helpful!
I changed my rods and did the calibration, but it didn't work for me. Mine is still shaking violently..
just use the hook end on the shock you remove.
Thank you:)
No problem 😊 Thanks For Watching My Video!
Awesome video. Where can I purchase the t handle hook you use?
Had issue with mine banging and sometimes shutting off in sensing and after wash light lit up it would just stop...all these issues solved by replacing pressure switch clear hose in back had a pinhole where it rubbed against back plate ..Reason for banging never achieved correct water level because of the hole in hose ..took me weeks to figure it out ..diagnostic mode showed f8 e1 so if your getting water from then inlet solenoids ..check the clear hose
Can you please provide me the hook for replace the shocks. Thank you
Is this the same for the whirlpool with out an agitater
Yes, It Would be the Same Process.
Do you know how to add more water?
You have the item number of the kit?
My washer does not have the agitator. Is this process the same for mine?
Yes, It Would be the Same Process.
Great video!!
Thanks!
Nice video!
Thanks!
Amazing Video ❤ saved 700$$ thank you ❤
You're welcome! Glad My Video Was Helpful to you! 👍🏻
Thank you very good video!
Glad you liked it!
When spinning the drum empty at full speed, the inner drum don't shake much, but the outer drum shakes a lot. I'm thinking the inner drum is out of round, and transmitting force to outer drum. Does that make sense?
What i want to is the suspension rod how do i know the kit to buy. I dont see it on the site
@@jermainewatson1902 Links to All Parts Are in the Description of this Video. Thanks for Watching.
Where did you get the shocks from
Links to All Parts Can Be Found in the Descriptikon of the Video.
I’ve replaced all 4 rods and even changed the hub but it doesn’t stop the tub from swaying side to side. So when it does a spin cycle it bangs around like crazy. Any other suggestions?
For some reason the last balance code light come on but don't flash they stay all on then after 1 a minute it shuts off and still shaking like crazy and the spring are new if I sit on it it will do the spin but otherwise is like coming apart and course don't finish the spinning
When I turn in the cold water it spills right into the tub without stopping, is it supposed to do that? Did I mess something up? It’s connected blue to blue. Someone pls help
What if it has a wash plate instead of a agitator? How do you manually check it? Thanks
If You Have a Wash Plate or Impeller Instead of an Agitator, You Can do the Test By Grabbing the Sides of the Tub and Pushing Down. Here is a Video as Demonstration: ruclips.net/video/NRzb_CxZk8Q/видео.htmlsi=bANTwAsGaZ1bpI5a&t=41
How can I get a hook
I bought the wrong suspension rod for the washer. How do i find my model number to buy right one😊😊
You can find the Model Number on the Back of the opening of the washer or on the Side When you open the Lid.
Bicycle inner tube around basket from the top. (Barely any air at all) Adjust pressure up or down and she will let you know, lol.
How do you know that they are bad
In the Video, We Show How You Can Know if the Suspension Shocks are Bad, However I will Leave here the Link to How to Test Them on a Similar Model. Hope this Helps, Thanks for Watching!
ruclips.net/video/einTTJy-ep4/видео.html
Excellent
Thanks!
Thanks 😊
Welcome 😊 Thanks for Watching!
I got the same brand without the agitator, I changed the shocks and still shakes too much, any idea why
And the transmission is good, no noise at all
Get to the point
If You are So Bothered By My Video, There is a free thing Called Exiting Out and Finding Another Video, Which You are More than Welcome to Try, Instead of Coming to the Comments Section and Leaving Rude Comments. Thanks for this, Have a Good One.
The rod system is the problem, replacing them is a very short lived fix. Shim the tub against the cabinet with foam or polystyrene . The most horrible washmachine design ever😂
@@conductorjohnmthtrains2239 Yeah it didn’t really help mine much at all
My model number is 2DWTW4845EW1
This Repair Also Applies to Your Model. Link to Parts are in the Description of this Video. 👍🏻
That's what i'm thinking, this machine sucks. I'm going to shim the tub
Thank you very much
You are welcome!
thank you so very much
You are very welcome
Thanks!
Welcome! Thank you for the Support, It is Truly Appreciated!