Thank you for this guide it certainly helped me on the right path. One thing to note with a 2011 D40 Navara as this is known in Australia there's a slight difference. You do not (cannot) remove the Door Arm Rest as shown in this video, it is integrated with the whole door covering. Once you undo the 2 screws under the Door handle and under the Switch Bezel as shown you can pop all the Door Trim panel pins around and lift up. Just be careful that behind the arm rest area is a slot a plastic retaining lug slides into.. be sure to lift up, not pull the door forward.... Thank you again, this allowed me to test and find that my front door speaker was OC and dead for sure, I've already ordered some Pioneer replacements (nothing too flash :) and cable adapters to suit. )
Thank you, this was the only guide that was decent enough to follow that I could find on RUclips and even with the slight differences between our models it was enough to give me the confidence to dive in and give it a go.. (I know this sounds silly to people that do car stuff all the time, but cars have never been my thing and I dont want to break stuff)
That is completely understandable. These videos are here to help. The more work you do to your vehicle, the more confidence you will have. It's a process
Thanks for this detailed walkthrough. Just replaced my stock speakers with some infinity’s. Only thing is the new ones are a bit bigger so the screws didn’t lineup in the plastic housing as well as with the stock ones. They’re tight in there tho!
Hello my friend and thanks for the video. One question. Can i solder the socket of the old loudspeaker onto the new one's pins? You think that would work?
My 2017 has tweeters on the front. I see you used a 4 way speaker. Do you have tweeters as well and if so did it sound fine having tweeters in two spots?
i have some ds18 6.5 bullet door speakers and i ordered a wire harness off of amazon that is compatible with the frontier and they look the same as those but the metal thing on the speaker that you plug it into is a different size and they don’t fit. Please help
You may need to order a spade connector kit (amzn.to/4aKYpGK) or run to your local auto parts store (or Walmart) to obtain the correct size. Once you verify it fits, cut the connector off that doesn't fit and crimp the new (correct) one.
The speakers in the video work pretty well; I just needed replacements. According to Crutchfield, it looks like the 2006 Frontier speakers are similar. Double check just to make sure.
Wow Roll down windows, Haven't seen them since I was a kid. Today those things can get you killed. Imagine being pulled over by police and the officer asks you to lower your window, it's dark you reach down for the window handle and strat cracking it a 😳 then all you see is a flash bang in your face. 🤦♂️ New cops don't even know roll down windows were a real thing 😂 Great video. Thanks for sharing.
@@ELEVOPR so the 2022 np300 4x4 diesel. Doesnt have speakers in the back doors. They have from door and tweeters. We use the wiring for the tweeters and ran them to the back doors
Check out www.crutchfield.com/S-p4aH2BaqZvs/p_003NSB710/American-International-NSB710-Speaker-Mounting-Brackets.html Or Amazon "Metra 82-7400 Speaker Adapter"
by far the most helpful video. props to you!
Thank you very much!!!
Chug a beer every time he says that's exactly what we're looking for
You should be able to handle 4 beers
Excellent walkthrough! One of the best I’ve seen!!
Thank you very much 😊
Excellent how to video and thx for providing the links in description too 💯
Thank you!!! I appreciate the support.
Thanks man! Great DIY, very calming voice brother. God bless you
Thank you very much!!!!
Thank you for this guide it certainly helped me on the right path. One thing to note with a 2011 D40 Navara as this is known in Australia there's a slight difference. You do not (cannot) remove the Door Arm Rest as shown in this video, it is integrated with the whole door covering. Once you undo the 2 screws under the Door handle and under the Switch Bezel as shown you can pop all the Door Trim panel pins around and lift up. Just be careful that behind the arm rest area is a slot a plastic retaining lug slides into.. be sure to lift up, not pull the door forward.... Thank you again, this allowed me to test and find that my front door speaker was OC and dead for sure, I've already ordered some Pioneer replacements (nothing too flash :) and cable adapters to suit. )
Good information. Thank you!!!
Thank you, this was the only guide that was decent enough to follow that I could find on RUclips and even with the slight differences between our models it was enough to give me the confidence to dive in and give it a go.. (I know this sounds silly to people that do car stuff all the time, but cars have never been my thing and I dont want to break stuff)
That is completely understandable. These videos are here to help. The more work you do to your vehicle, the more confidence you will have. It's a process
Thanks for this detailed walkthrough. Just replaced my stock speakers with some infinity’s. Only thing is the new ones are a bit bigger so the screws didn’t lineup in the plastic housing as well as with the stock ones. They’re tight in there tho!
I'm glad the video helped. How does the speakers sound?
Great video!!
Thank you very much
Great video 👍 very useful 🙏
Thank you!!!!
Perfectly explained great video 👍🏻
Thank you very much!!!
Hello my friend and thanks for the video. One question. Can i solder the socket of the old loudspeaker onto the new one's pins? You think that would work?
Thank you!!! Should work. As long as it's a good connection, the equipment can't tell the difference.
Gracias por la esplicasion m ayudo mucho
You are very welcome. I'm glad it helped.
Thanks! Do a video for the tweeters in the dash!!!
Thank you for the support. Sadly, my truck is not equipped with tweeters in the dash.
@@mcgurrentertainment no problem the two you have are great! Took any guess work out of this for me just changed out all my speakers on my 07 frontier
That's awesome. I'm glad it helped 😃
My 2017 has tweeters on the front. I see you used a 4 way speaker. Do you have tweeters as well and if so did it sound fine having tweeters in two spots?
Hello Kaeouto, my Frontier is not equipped with in-dash tweeters (it's the bare bones model).
i have some ds18 6.5 bullet door speakers and i ordered a wire harness off of amazon that is compatible with the frontier and they look the same as those but the metal thing on the speaker that you plug it into is a different size and they don’t fit. Please help
You may need to order a spade connector kit (amzn.to/4aKYpGK) or run to your local auto parts store (or Walmart) to obtain the correct size. Once you verify it fits, cut the connector off that doesn't fit and crimp the new (correct) one.
Thanks man 👊🏾🤌🏾
Thank you for the support.😊
Hello man is that speaker good and compatible with nissan frontier 2006 model?
The speakers in the video work pretty well; I just needed replacements. According to Crutchfield, it looks like the 2006 Frontier speakers are similar. Double check just to make sure.
Rattle in the door from the loose connector? Good idea to cover connector in foam and wrap with tape....no chance of a rattle.
Good idea
Again great video.
Does that harness adaptor fit front and rear doors or is the rear door different?
Thank you. Yes, the same harness is used for both front and back.
Great video. Do you have one for the back door speakers?
Thank you very much for your support. Rear Speaker Video: ruclips.net/video/sSadCeLOVOc/видео.html
Wow Roll down windows, Haven't seen them since I was a kid.
Today those things can get you killed. Imagine being pulled over by police and the officer asks you to lower
your window, it's dark you reach down for the window handle and strat cracking it a 😳 then all you see is a flash bang in your face. 🤦♂️
New cops don't even know roll down windows were a real thing 😂
Great video. Thanks for sharing.
Manual windows...it's a good way to stay in shape 😁
hello i installed speakers for the back door because my model np300 didnt come with speakers. but they are not playing any sound
I'm not sure what the configuration for the NP300 is setup as. Hopefully, someone can chime to help determine the root cause.
Ddi you figure it out? were the speakers connected from the back of the radio?
@@ELEVOPR so the 2022 np300 4x4 diesel. Doesnt have speakers in the back doors. They have from door and tweeters. We use the wiring for the tweeters and ran them to the back doors
What’s the name of the wiring harness you used?
Metra 72-7401
Is a 2005 Nissan titan king cab got same 6x9 bracket I can’t find any found for the 6.5 rear
Check out www.crutchfield.com/S-p4aH2BaqZvs/p_003NSB710/American-International-NSB710-Speaker-Mounting-Brackets.html
Or Amazon "Metra 82-7400 Speaker Adapter"
@@mcgurrentertainment u used factory bracket right
No. Aftermarket ones
@@mcgurrentertainment I have the 6.5 brackets but the 6x9 cannot find HELP🙏
Should be a link in the description
Does it give bass without amp?
Yea. It's not an overwhelming amount of bass, but it sounds decent.
@@mcgurrentertainment nice I wanna do this for 23 armada sv. Has no bose system.
Would this work for a 2017?
Depending on your frontier, Crutchfield says these speakers may work.
Assume!
Thank you!!