1 Year Later w/ Dominator Motorcycles FXRT Fairiing - Should You Avoid Dominator??
HTML-код
- Опубликовано: 6 сен 2024
- follow up review on the Dominator Motorcycles FXRT fairing, Thanks for watching and ride safe vatos.
Buy some merch!
my-store-11270...
My Bikes:
2007 Shadow Sabre 1200c
2005 Sportster 1200c
2020 Low Rider S
Camera Gear:
Hero 9
amzn.to/3nyeWqY
Action 2
amzn.to/3DlbQfL
Osmo Action
amzn.to/3yreDRV
Go Pro Hero 5/8
amzn.to/3gyFqVY
Voice Recorder
amzn.to/3vHmY1X
Go Pro Sessions
Sony A7IV
amzn.to/3Fo3hS2
Sony FX3
amzn.to/3yqJy0S
Nikon D300s
Samsung S20
amzn.to/2SDCu12
Ninja V Kit
amzn.to/3fKaUYr
Sony 50mm 1.2 GM
amzn.to/37sGAwR
Motovlog Setup:
Biltwell Lane Spiltter
amzn.to/2TCwdDc
Biltwell Gringo S
amzn.to/3vxkHWT
Go Pro Hero 8
amzn.to/3gyFqVY
Go Pro Mic Adaptor
amzn.to/3wy6dqV
Sony Voice Recorder
amzn.to/3vHmY1X
Motovlog Mic
amzn.to/2TFSaRP
Handlebar Ram Mount
amzn.to/35tSJk9
Ram Mount X-Grip Kit
amzn.to/3gD0oTT
Ram Mount Arm
amzn.to/3cO4dDc
2020 Low Rider S
Biltwell Alumicore Grips
Memphis Shades Road Warrior/ 11" Windshield
Memphis Shades Hand Guards
Flo-Motorsport Foot Pegs
Harley-Davidson Mustache Engine Guard
Saddlemen TR Step-Up Seat
Cobra El Diable Two-into-One
Harley-Davidson Street Tuner
Plex Audio System
Nilight Aux Lights
Kuryakn Laydown License Plate
Leather Pros V3 Saddlebags
Alloy Art Strut LED Lights
Custom Dynamics LED lights w/ smoked lens
Purchased parts on:
GetLowered
Harley-Davidson
infamouscreep
My biggest problem is the cost. I wound up buying a chinese made knockoff on Ebay for 650 including the mount. Have had zero issues with it. Came primed and ready for prep. Took about 2 hours to sand it up well and use a bit of filler to even everything out. Paint was super easy using an adhesion promoter first. I'd say quality is on par with most other FXRP fairings available for 1.2k+. Mount is solid. Holes were already in the right place for my windshield, but I did need to drill out for the headlight cover and the lower support bracket which was fine. I'd say install was as easy as any of the half dozen I've helped friends install. I designed and 3d printed 8" speaker adapters and run 2 x Kicker KM8 marine speakers at 150w RMS, 300w peak off the same JVC bluetooth amp you run (Have you dyno'd that amp?! It's wild man! Bridged to 2 channels at 4 ohms it's only supposed to push 150w RMS, but it pushes well over 200w rms) Even though the speakers are open air/infinite baffle speakers that don't require a full enclosure I am running some custom foam baffles on the inside to increase the low and mid range response. I don't have my gauges like you (I ride a Street Bob with a 5 gallon conversion), so I had free space up top over my PV. I run a motorcycle Android Auto unit for nav and to use as a head unit. Basically, phone connects on bluetooth through the unit and unit pushes bluetooth to the amp. Looks pretty sick and I get a ton of compliments on it. I'm in the process of adding a JVC KS-DR2001D for bass in my bags and running dual 6.5 woofers as well.
The grill was likely printed in PETG. I print everything in ABS/ASA for my bike, which is much much stronger than PETG. Different filaments have different qualities and using anything other than ABS/ASA for a motorcycle should be avoided...but companies try to cut costs I guess.
You got pics ?
Russ W.
👍👍
Mine came damaged and they never paid to fix it unfortunately