So you officially have more experience with heavier machinery, I was told by the tool rental joint that tires are for harder surfaces and tracks are for softer ground like grass and dirt. Also tracks usually rent for more. This is all of my knowledge written into a long run on sentence. Keep kicking ass brother
Thanks man. The logic is there I don’t claim to be an expert on anything but I am an avid researcher … that said I would love to understand the differences in the track shapes
If the hour meter dies, Rocky Mountain ATV-MC has Tusk replacements that match the screw holes. It does have an external wire that needs to route thru a hole. Drill and add grommet. Meter has several functions, including RPM. I put one on my mini ex.
Thanks for making this video 😊 I ordered the same machine, (just a different brand name) Definitely looking forward to getting it in a month or so. I like the simplicity of these, should be easy to keep them going 👍
Yes, the triangle tracks work better, especially on gravel. It gives the rocks more opportunity to fall out before they reach the dive cog and jam it up. A jammed cog happens to me just about every time I make a turn on 3/4 clean crushed rock with my mini excavator, which does not have triangle tracks. I have to put the boom down on the ground to lift the jammed track up. Then cycle it back and forth a bit to get the grave unstuck. So, good choice on triangle tracks.
Triangular tracks only provide improved ground clearance over flat tracks. The big difference you'll find in skid steer drivetrain setup is tires versus tracks.
Can you get a backhoe excavator attachment for this? I've seen it for other models. I don't know if attachments are universal or it can only work with specific ones.
That I have not seen. Not for this size yet at least. I am still not clear in the gmp of the hydraulics on this or specifically on the auxiliary circuit….so I am not sure what type of accessories it can run. But I am super new to hydraulic equipment
dude... would have been a game changer... i wasnt really aware of them back them if they were available.. i think they will be available everywhere eventually
I've looking at these and almost all show the standard bucket is .15 yard. I don't know how that is measured. I would guess level, so you might get a bit more if you are good at scooping up dirt.
If nothing else the high drive track might be longer, meaning it has more rubber surface than a low drive belt. That could translate into longer track life?? Also you mentioned that you have 1 hydraulic pump; actually what you showed us is a twin gear pump set on the same input shaft (note the 4 hoses). Might be that one pump runs the right valve body and the other runs the left valve body; it would be easy to track back the hoses to figure it out. Also look for a spin-on hydraulic oil filter hiding somewhere under the hood. If the hydro oil filter is absent it could be an inexpensive & smart add-on.
Thank you for all of that including the correction about the pump. You are absolutely right and tried to make that note in the newest video. But that’s still more I for than I had. I am very new to hydraulics
That shape is better the top of the triangle shape is is the motor that moves the track so it's up of the ground vs having I straight track so the motor is close to the ground
So you officially have more experience with heavier machinery, I was told by the tool rental joint that tires are for harder surfaces and tracks are for softer ground like grass and dirt. Also tracks usually rent for more. This is all of my knowledge written into a long run on sentence. Keep kicking ass brother
Thanks man. The logic is there I don’t claim to be an expert on anything but I am an avid researcher … that said I would love to understand the differences in the track shapes
I have one with tires and I can confirm, the tires tear up grass something fierce.
Love the content man! I’ve been checking your channel every day waiting for a new video to drop
thanks man, I try to get them out on sundays, but i got a little behind this week better late than never
I just got one
May 2024
I do concrete so it works for me. Takes the labor off your back.
Concrete is something I am studying up on. I have done very little bit I have a lot to do
I just got one tonight, ready to move some gravel tomorrow!
If the hour meter dies, Rocky Mountain ATV-MC has Tusk replacements that match the screw holes. It does have an external wire that needs to route thru a hole. Drill and add grommet. Meter has several functions, including RPM. I put one on my mini ex.
Rpm is a neat feature
Thanks for making this video 😊
I ordered the same machine, (just a different brand name)
Definitely looking forward to getting it in a month or so. I like the simplicity of these, should be easy to keep them going 👍
Yea man. I am curious to see your video on yours when it comes out. Seems like the market for these thing should be huge at the price point
How much u pay for it and from where
Yes, the triangle tracks work better, especially on gravel. It gives the rocks more opportunity to fall out before they reach the dive cog and jam it up. A jammed cog happens to me just about every time I make a turn on 3/4 clean crushed rock with my mini excavator, which does not have triangle tracks. I have to put the boom down on the ground to lift the jammed track up. Then cycle it back and forth a bit to get the grave unstuck. So, good choice on triangle tracks.
that makes a lot of sense when you use that example.... i ll be careful with the minix when i get gravel down... had not really thought of that
Triangular tracks only provide improved ground clearance over flat tracks. The big difference you'll find in skid steer drivetrain setup is tires versus tracks.
Perfect job !! Good man !
Have you looked at the price of a shovel lately? You did good. Some counter weights will help keep it on the ground
thats a really good point
Where can we order extra parts and attachments for this machine. Looking to get an extra set of tracks for it.
I just purchased this exact model for my dad. We are driving it across Kansas as typing this. He wants to know what does the middle lever do??
Auxiliary hydraulics my good man. For attachments. I still have not been able to figure out the gpm flow rate on it though
Can you get a backhoe excavator attachment for this? I've seen it for other models. I don't know if attachments are universal or it can only work with specific ones.
That I have not seen. Not for this size yet at least.
I am still not clear in the gmp of the hydraulics on this or specifically on the auxiliary circuit….so I am not sure what type of accessories it can run. But I am super new to hydraulic equipment
@@betweenthesharksgarage ah ok
You needed that when you added on to your shop.
dude... would have been a game changer... i wasnt really aware of them back them if they were available.. i think they will be available everywhere eventually
Isnt that a dual pump? Im allso an amature but i thought that mashines with more pump just have them in line one after another?
That one is. I made a mistake in the video. The excavator is one pump
What is in the caravan I’ve been waiting
Man… alright we will do one
I want to see how much uship will charge to deliver I got one in ritchie bros auction for 4400 same machine need dimensions how tall how wide how long
How much material will it carry….looks like maybe two wheel barrels??
I've looking at these and almost all show the standard bucket is .15 yard. I don't know how that is measured. I would guess level, so you might get a bit more if you are good at scooping up dirt.
Is there anyone that could post a video on how to change hydraulic fluids on the machpro mps300
If nothing else the high drive track might be longer, meaning it has more rubber surface than a low drive belt. That could translate into longer track life?? Also you mentioned that you have 1 hydraulic pump; actually what you showed us is a twin gear pump set on the same input shaft (note the 4 hoses). Might be that one pump runs the right valve body and the other runs the left valve body; it would be easy to track back the hoses to figure it out. Also look for a spin-on hydraulic oil filter hiding somewhere under the hood. If the hydro oil filter is absent it could be an inexpensive & smart add-on.
Thank you for all of that including the correction about the pump. You are absolutely right and tried to make that note in the newest video. But that’s still more I for than I had.
I am very new to hydraulics
Definitely a good Deal Buy Starton fuel additive and put it in the fuel help save the carburetor
Thanks man that stuff makes me nervous the project farm did a great video on fuel and fuel stabilizer. Definitely worth checking out @projectfarm
What speed this can go?
Can’t say exactly but it is plenty quick. The mini excavator is far slower
That shape is better the top of the triangle shape is is the motor that moves the track so it's up of the ground vs having I straight track so the motor is close to the ground
interesting that makes sense to me
6:43 saw them in the shadows
cool! hopefully the chinesium holds
Hope so too. But I think it will
Where are the sexy riding mowers?
quit stalling and fix that car parked infront of the garage and make a will it drive video
Lol. Fair enough
Boring‼ 👎
Like we care what you think 😂
Go watch something else then.
Yeah you are!