Amazing!! Powerful oil waste burner without a blower machine DIY tutorial
HTML-код
- Опубликовано: 6 сен 2024
- This is the second time I've made a burner from used oil as fuel, this burner uses steam as a suction and thruster of fire, with a venturi effect technique. So no blower is needed. other than used oil, this burner is water-fueled
so, you're using the steam generated by the heat of the oil fire to create a venturi affect that mixes art in, increasing the efficiency of the burn and the heat output. One thing i would add is a automatic pressure release valve , so it doesn't explode. Pressure testing might also be work looking into
That's right, I want to add a pressure relief valve and a pressure gauge, but it's expensive in my place even if there are cheap but poor quality
@@ThePlantsKeeper Think old pressure cooker safety valve. A pipe with a weighted cone sitting in it. When pressure got to high it lifted released steam then fell back into place. Start light and add weight.
@@ThePlantsKeeper you can fabricate... just find spring and a metal weight
@@ThePlantsKeeper an old fire extinguisher will hold the pressure. The water, foam and powder types have good quality gauges.
how exactly is the burn efficient when the flame isn't blue?
I been commenting on how dangerous a spill of water on oil burner stove design,
but with this, its explicitly mix the steam with the burned oil, now the violent flames is utilized efficiently and also removed the fan which use electricity.... following the design and upgrades on next videos...neat.... keep it up...
Thank you, that's the reason I always do a leak test because it would be very dangerous if any water fell into boiling oil
what will happen seriously? @@ThePlantsKeeper
@@user-jr1nh3qi3b wild fire 🔥
Funny, this is kind of how steam locomotives work. Once the steam is released from one side of the cylinder and the other side is pressurized, the exhausted steam is blown out of the smoke stack to induce a draft through the firebox. That's why they chug.
how to avoid chug?
Very unique design. Really interesting wow 😮 👏 good job 👍
Thanks brother 😊🙏
Had to watch twice to understand the build awesome will be copying when I go off grid with a few mods thank u
Thanks for watching 🤗
What mods?
Perfect
Nice job it works with oil and steamed water.
Thanks 🙏😊
A gallon of water +80c in 0.06 hours = 5-6 KW of heat energy. That's like the power of a home heating system. Not bad for a contraption.
This is amazing but please we we need a video with more details on how it works. Thank you sir.
Just wait okay
@@ThePlantsKeeper or the draft if you can show it😁
Amazingly very good contribution to the human race!..you are very kind and perfect inventor
Thank you 😊🙏
My only dream in life is to live up to your expectations I hope one day I can be judged by you and prove myself worthy to the human race.
Mantapp om kreasi dan idenya, udah sering saya liat aneka oil burner luar, baru ini nemu pake system venturi tekanan uap air, mantap
Makasih kak 🙏😊
Mavalous, good work in deed!
@@magnusmakungu9604 thanks brother
Om kalau mau order bgmn caranya..mohon di respon ya om...ditunggu
Good invention kabayan, improved pa more para excelent at produced more para tayo kahat makinabang
Siap terimakasih kak 😊🙏
Good❤️ I am welder of Bangladesh🌹
Great, great, great invention you have.
I this will be much better if there is a pilot light igniter like what others did before the strong blue fires appears. They do not use any blower but heated the pipe using alcohol before they release the oil and the steam they got from it produces the needed fire. If using water can add more power on the fire then this is much more powerful than just using the oil. The pressure valve is also needed if using water.
Thanks brother, and thank you for the advice I appreciate that 🙏😊
i did watch again & got the idea ⭐⭐⭐⭐⭐
Cách chế bếp nhớt thải không xài quạt gió của bạn rất hay
Thanks brother 😊
Im sure theres a lot of people eyeing this to imitate them hahaha..
Well that is the point sir, sharing is caring 🙏
ofcourse! whats funny?? idiot
Bobo amp 😂
I just think of a Big Wok on top of that monster flame. What a great idea to use old oil from restaurants into the same cooking device 😮
I like your idea
Thanks brother
Very good....!!!!!🎖
Thanks brother
mantap idenya, sukses selalu....
Thanks kak 😊🙏
Neat little project however; it takes energy to cool and or freeze water for its purpose. Neat little household project but not viable for survival or anything like that unless you were to add a solar powered thermoelectric cooler or glyco cooler with a solar option for powering the pump. Which again would be over engineered for a survival application. So it's really better off in a survival situation for someone to actually boil distill over a fire. Still a neat project though for one two get a concept of atmospheric condensation to produce water. But the laws of thermodynamics indicate power in for product out. There by the temperature differential is what matters which is why you have to use cold water in your system whereas a survival system would get its temperature differential from the fire versus atmospheric temperature while at the same time sterilizing and killing any contaminants.
Spoken like a real engineer....confusing as hell, and pretty narrow thinking.
Interesting as hell man can you draw up the plans for us and post them on this late on it put a link in this post
Let me think about it, just wait
Lol he provided a step by step video!
@@wesleymccravy901 But no explanation...one has to wonder why...
That thing looks like a Pulse jet
It is 😁
of course. thank you.
Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks brother 🙏😊
amazing keep it up bro
Thanks brother
Just wow, amazing idea
Thanks brother 😁
amazing keep it up 👍👍
Thanks dude 👍🙏
Very inovative,,welldone👍👍👍
Thanks kak 😊🙏
How long does it take before the steam is generated to assist air flow? When the water is finished you will have a Smokey flame as the tank is refilled and heated? Could you incorporate an air pump to take over those minutes for continuous clean burn?
So when steam is finished we need to turn off burner add more water. It would be good like oil we can have water flow also by balancing water pressure. Still you got very wise Idea thanks for uploading. M.J. Zakaria u.k.
Well done
Thanks ☺️
Wish you good luck
Thanks ma'am
I really liked the concept of this kind of stove in which doesn't uses a blower or of similar kinds... It's a great concept...heck it may even make an appeal for the public and be purchased like crazy is this goes viral.
Also, if i can ask.... Is the oil you're using a used car/motorcycle oil? Or used cooking oil?
I know it may sound stupid for me to ask this but... I can't honestly distinguish which one is what 😅.
Used engine oil or cooking oil both can be used 😊
Impressive 🔥
Kailangan dyan may pressure monitor at realease valve para safe Hindi ma over pressure
English please 🙏😊
He said need pressure gage and pressire relief valve. In my opinion fixing pressure gage is a safety feature the user to know the steam pressure inside before hydrogen and oxygen gases evolve to the combustion chamber. Maybe somebody can make imptove modifications to improve safety features and more intense heat generated.
@@albertocabual6023 I also agree with that, for more safety, you can add a pressure relief valve and a pressure gauge, in my place such equipment is very expensive, some are cheap but it's same as buying garbage
Can one mix water and say acetone or water ethanol together until it a less volatile mixture since water is miscible in these combustible solvents; then allow that to be pressurized from the heat with a smaller orifice and run the venturi burner? And then only be using something like oil or white gas or w/e to initiate the heating of the water/fuel mixture?
Also note I KNOW you cannot use oil and water in that stream generation reservoir because the oil would be separate from the water, the water would enter gas phase before the oil and would not be able to get past the oil's viscosity. It would blow up and kill anyone nearby. Like that time a crude oil storage tank was on fire and fire fighters hosed it for like 2 hours and the water was just slowly seaping into the fuel silo replacing the oil a it burned away. Then it heated the water to a supercritical state and could not contain the pressure. It blew up and gave all that oil exposure to a HUGE area to burn, all the surface area contact with air to burn at once, made the oil into just fast moving droplets of inferno
For heat a 55 gal barrel to produce charcoal
Tlud
Please provide schematic diagram of your burner! Thank you in advance.
Great idea. Could you show me how we could add water continuously when the burner used for long run?
For long-term use, you can increase the size of the boiler, because in hot conditions it becomes difficult to fill water bli
It is impossible to add water continuisly because the mix of hot & a cold water will cause water hammer inside & 90--100% assurance to blow the boiler, so much better don't try it...
@The PlantsKeeper They have a check valve you could use to keep adding water an not lose pressure
Wicked! Love it mate
Thanks 😊
Wow!
Good,, like a boiler.
But maybe we have to add a relief valve for it. Or any precautions?
Anyway, just suggest more Ideas to prevent any danger for more protection.
Thank you for sharing this..
Yes, I agree, a pressure relief valve can be installed to prevent excessive pressure, maybe I will install it in my next project. Thanks 👍
@@ThePlantsKeeper
Yes,, thank you for your response..
God bless for sharing this. Now we have some ideas how we fight for the expensive gases for our house cooking..
@@jacrengel9063 my pleasure 🙏
@@ThePlantsKeeper can we see your updated version of this project with installed pressure safety valve in it?
Good & unique but it's very dangerous, it may blow your face, or hand if you mislook to open the water intake valve while it is hot...
Opening and closing the water inlet is when the tool is cold, because it will be difficult to enter water in hot conditions, unless the pressure relief valve is installed facing downwards
the Cat it's the best in the video ;-)
😁
Ayos delikado ngalang sa mga pabaya at sa mga adik sa cp
Is there a risk of all the water in the reservoir turning to gas at once, and making it explode if you overfill it? Seems very possible when you're putting out that much heat.
Watching here
Thanks 😁
Good job bro but the problem is not blue flame more upgrade for the burner macky marikina city philippines
Thank you sir, but this burner is not for cooking, so it doesn't need to be blue, this stove is for high heat work purposes
Muito interessante!
Wow nice 👍👍👍
Thanks 🙏
Why did you add water? That decreases the useful energy output to produce steam
Wow...👏👏👏👏
Thanks brother 👍🙏
OK, so I guess it is a nice build, but how does it work internally?
Cerdas dan kreatif bngt sih mas, orang mana mas? 😁👍
Good job idol..
can you t show the connections to inside of the 2 feeder tubes/pipe.
if this is my burner, i'd be keeping a full battle gear armor while cooking.
Nice idea 😅, but I don't use it for cooking 😊
Yg kayak gini matiinnya gimana? trus biar ga keluar asep gimana?
Amazing my friend 👍
Thanks 😊🙏
Om sya bikin kompor bahan bakarnoli bekas hasil apinya kok gx bisa biru ya
could a pressure release valve from a hot water heater be appropriate? what rating or specs would the pressure guage need?
It gets better, 100 bar is more than enough
As, Pressure is equal to Force/area you just need to make a 12,5 hole and put a weight of 200g over it to hold this pressure
@@agoradacerto neat
1 liter olie bs untuk berapa menit?
excellent..💪💪❤
Thanks dude 😊
amazing
Thanks 😊
Kulang lng Ng drain hole/pipe to removed replace water after consuming hydrogen or not in use for long time
No need for drainage pipe, because water turns into steam, breaking down the hydrogen happens when contacting with fire
DOES IT SMELL LIKE BURNT OIL? THE COOKED FOOD? It looks like the bottom part is is emitting smoke
It's odorless at all
j'aimerais avoir le plan EXACT: je ne l'aipas bien compris!
and the cat returns at the end of the video. This looks dangerous in the event an even so slight leakage occurs sometime later......kabooom! worse still if your're melting metal, water will make all that metal turn you into a sieve. the idea is ingenious though.
If there is a leak, the pressure will go away and the fire will decrease, I have already pinned a comment about safety by adding a pressure reliever
This might be a rocket
How to add water if it's empty? Open the water valve cause the steam pressure getting low right?
You have to wait until the temperature drops
Put water in the tank, right?
Yes sir
@@ThePlantsKeeper thank you
@@user-cc5rt1dy4c okay 😊
how to get rid of the smoke after cooking and turning off the fire
How to turn it off by stopping the oil supply, and exhausting the steam pressure
We Need now in germany for heeting 🤷🏼♂️👍✌️
From the video and a comment you replied and you channel nameI notice that you're Indonesian, apakah ini dijual?
Yes kak I'm Indonesian, sementara ini masih sibuk buat pertanian organik untuk percontohan jadi blm bisa produksi untuk dijual
@@ThePlantsKeeper very well, nice share, thanks anyway
@@firmannugraha3271 okay you're welcome brother
Cool good job❤
Thanks ☺️
Untuk buang tekanan uap air apa bisa dengan memperbesar lubang pipa kecil yang didalam? Bahaya juga ya kalau tekanannya nggak dibuang
Bisa sampe 3mm, idealnya dipasang pressure relief biar aman
Terima kasih
Sama-sama kak 😊
GooD idea
Thanks 🙏😊
Good one. What was added from the kttle and the stringe and for what purpose?
It's gasoline for starters, because oil is hard to lit when it cold 😊
yong ganong kolay ng apoy hindi ba magka uling ang kaldero
It's a pulse jet.
❤ berapa jumlah biaya untuk pembuatan kompor tersebut
For outdoor 🤗
Awesome man...but, what did you mix in the use oil to make the fire stronger?
It's gas, for starter because oil is hard to lit when cold, it's water that make the fire stronger
@@ThePlantsKeeper what if the water runs out? how much water can be put in there? can it be filled?
@@jeralddalnay8168 When the water runs out the fire will decrease, with this design it can fit about 6 liters of water, but the more water the longer the initial preheat process
@@ThePlantsKeeper maybe I'll make something like that but smaller than that first so I can test it...well then thank you for sharing, keep it up and God Bless 🙏...one last question where are you from??
@@jeralddalnay8168 okay success, I'm from Indonesia
Nice bro
DANGEROUS
Dangerous and useful 😆
Can your system be likened to principle of creating vacuum using compressed air jet?I mean creating a draft (which produces vacuum from sideflows into airjet path). (I know little science only,my apology if incoherent).
Yes, it's sort of like that in principle, the role of pressurized water vapor is like an air jet like you said
Itu pakai air ya bang ?
Can you get a stronger flame with a pilot light at the air intake?
What is pilot light?
Just a small flame at the air intake to speed up the air flow.
It's not needed for this design but a more simple design without the water
What power ignites this pilot light? Maybe I'll try if I understand
@@ThePlantsKeeper any flame a Lil buddy burner a hot coal anything to drive more air into the bigger fire
@@diglettunnel.kaneko Maybe I prefer an air blower if I want to add pressure, I'll think about it later
What is that blue liquid that you pun inside before you start the fire.?
It's gasoline for the starter, because oil is hard to lit when it cold
I dont understand the full mechanics. It would be great if you would explain every single details.
The top tube filled with water is actually a boiler to produce steam, the steam produced is channeled into the middle pipe to help suck the fire and push it stronger
Itu bang kompornya bahan bakarnya pake oli bekas bang by 🇮🇩
Iya kak oli bekas, atau minyak goreng bekas juga bisa
I want to weld but breathing in the fumes is the kind of mistake you only make one time (lethal) so I've always shied away from it
Okay noted 😊👍
Well lets push this further... Can you Heat a bigger tank for a Central Heating or use the Steam for a Turbine to generate Power? It Looks Like its very effective. How much oil per hour?
I think it can, the use of oil is quite wasteful but it is directly proportional to the resulting fire
That's what a oil fired steam train is . Works the same as what you're suggesting
Gumawa ako ba't d sumega?nilagyan ko ng flyingtiger.
Auto subscribe bang👍👍👍
Thanks bro 👍
how much water in your kettle? 1 litre right?
For testing I add 1 liter, but actually 4 liter to make it full
This is actually kerosine veporosed and caught fire
hello sir this is so wow, may i know your emal add? thank you
zu.ihsan@gmail.com
OK what I really want to see is a swimming pool water heater running on waste oil.
For a small swimming pool it might make sense 😁
@@ThePlantsKeeper yes our pool is small. It is a lap pool. About 7000L. Would also be good for a spa pool/jacuzzi.
@@NaughtyGoatFarm wow that sounds awesome 😁
Yeah use similar design but use a fan and hook the pool up to the tank. Wonder how long it would take to heat say 20,000 gallons?
permisi mau nanya semoga di jawab, kalau sumber api dari oli bekasnya diganti sama kompor gas, bisa kaya gitu engga ya apinya?
Bisa sepertinya kak, asal spuyer mendukung dan regulator juga mendukung ☺️
@@ThePlantsKeeper oh gitu ya, soalnya salah perhatikan sebenernya apinya tidak perlu besar ya di bawahnya, asal cukup. yang bikin api besarnya kayaknya uap air yang terbakar ya kak?
@@by.farisi betul kak air dalam kondisi uap lebih mudah dipecah menjadi oksigen dan hidrogen ☺️
@@ThePlantsKeeper coba bikin om, yg sumber apinya gas 🙏🏻😄