Nais kopong makasama uli lahat ng bomoto saakin na naniniwala sa mga programa ko ibaba ng 50% up to 80% ang ginagamit ng pagluluto ng bawat pamilya ng tahanan. Ngayon po ito na KALAN USED OIL po,maghapon magdamag supper tipid nais kong lahat makatipid kontra LPG,gasolina, kirosen,dahil subrang taas na lahat ng mga bilihin.
I sure hope that Santa Claus is watching , and sees just how bad you need drill bits for Christmas this year!! Cool ideas man! Thanks for sharing! I gave you a BIG THUMBS UP! GOD BLESS!
Hola soy de argentina y me pregunto no hay un argentino que le demuestre a estos que no es asi de facil y vamos muchachos hagan uno que si anda bien y que sea industria bien Argento!!
Crude construction but very effective is what I would say! It could use much better construction practices and better refinement but how is this burning of oil emitting these kinds of gases that you would ordinarily see such as with the use of propane that gives us the clean blue flame that is most common to the use of propane or natural gases???
because the flame of a gas stove is a premixed combustion, basically the fuel is already mixed with air before it combusts. This makes sure that there’s no rich areas of fuel, which cause incompletely combustion, causing soot and a yellow flame. Basically, blue flames mean very clean/complete combustion (very hot), while yellow flames mean incomplete combustion (less heat and more soot).
To all viewers, please be careful in doing such projects using an old flammable gas tank material. The residual gas inside might explode when spark is produced during cutting.
.@@creativeinnovationideas Don't believe it research it because I went to school for concrete work and it is sometimes used in cold climates as antifreeze but it definitely weaken the psi strength
These burners have a big problem, namely that they cannot be cleaned of the deposits from the burnt car oil.but probably if it works with used cooking oil, the deposits will be smaller
Unsafe pa rin, try mo patakan tubig kung ano reaction.ng apoy, mas maganda jan kung may takip ang chamber o ang burner kasi .magliliyab yan pag napatakn ng tubig
At 9 minutes into the video it doesn't show what air pump or fan was used to blow air through the pipe and the holes in the burner. That's the way it works I understand but why not show what forced air method?
So the oil is just used like an oil lamp or something? The burner is just an air supply? I thought the oil would be pressurized or at least continuously fed and through the burner and burn like any other fuel. Looks like you just threw oil in a rocket stove and hoped that paper and sticks would eventually ignite it.
nice one idol watching from Philippines
Thank you for visiting 😊
Galing Naman gumawa Ng kalan na langnges
Thank you
Nais kopong makasama uli lahat ng bomoto saakin na naniniwala sa mga programa ko ibaba ng 50% up to 80% ang ginagamit ng pagluluto ng bawat pamilya ng tahanan.
Ngayon po ito na KALAN USED OIL po,maghapon magdamag supper tipid nais kong lahat makatipid kontra LPG,gasolina, kirosen,dahil subrang taas na lahat ng mga bilihin.
Thank you
I sure hope that Santa Claus is watching , and sees just how bad you need drill bits for Christmas this year!! Cool ideas man! Thanks for sharing! I gave you a BIG THUMBS UP! GOD BLESS!
well done, it turns out very well, it's very pleasant to watch
Thank you
Akayy mantap terimakasih banyak atas ilmunya dan pengalaman x semoga bermanfaat
Thanks for watching
I am watching and learning how to do it. I wanted to try to make one😊
Go for it!❤️
The best lodz. Makakatipid talaga sa LPG o kuryente! 👍👍
Thank you 🙏
24:43 ni no😮@@creativeinnovationideas
Gracias 👍👍👍🇻🇪
Appreciated 😊
Nice galing gumawa ng kalan di langis,good job!😊
Thank you 👍
wow! Amazing bro❤
Thanks 🔥
Hi idol i'm here in jupiter 🪐 watching you.👽
Thanks for coming
Nice one DOL THANK you for sharing ,👍🥰
Thank you too
U R GREAT INVENTOR
MANY thanks 👍
Thanks cuz It really helped a project i was already working on
Great!
galing talaga Ng pinoy kailangan Lang ang suporta Ng governo para mapa lawat pa ang Ka laman Ng pinoy 🙏🙏🙏
thank you❤
I like ur diy berry cool
Many thanks to you my friend,
Ordet
Ferry nice👍
Thanks for the visit
is it posible to use used cooking oil instead of petroleum. petroleum fume when burning is cancerous. and no tar residue
wow nice good idea new friend amazing wow.sending my full support host.tamsak done at dikit fullpack kalimbang all. kasano from pilipines
Thank you my friend ☺️
Best oil stove # 1
Good choice
Thanks 👍
Welcome
آخر واحد هو الأفضل👍🏻
Thank you 🙏
Astig ng gloves mo idol meron ba niyan sa shopee😂😂😂
Thank you for watching
Verry good,sukses
Appreciate 👍
Luckily he's wearing his safety gloves.
Thank you
Very simple to cook
Thanks a lot
😊😊
Gayahin ko ito lodz pramis
I'm glad you like it ☺️
Assistindo aqui de Long Beach California
Hello thank you for visiting ☺️
Yan ang gamit nmin sa pagluluto hinihingi ko lang sa mga kaibigan ko yung pinag change oil lan
Thank for sharing
Nakakasira ata sa kalusugan yan
Bro good, something is better than nothing.go head.
Just found your channel and Subscribed. Very nice work
Thank you 👍
kay galing naman
Thank you
Amazing
Thank you! Cheers!
Sama samahin natin mga gumagawa Ng kalan use oil
Thank you for watching
Can you make another where oil and air are integrated.morev power bro
I'll try my best 👍 keep in touch
Ive got a lot of old propane tanks i can use, but where do you find the burners from?
Junk shops
Induction is best I think because fan we need electric and though it's use oil but need oil if no oil no flame
No 1 is best
Try it 👌
mmlso new friend diy fabrication
Appreciate 👍
HOLE SAW... but I must say you can cut a nice round hole with that grinder
Thank you
Hola soy de argentina y me pregunto no hay un argentino que le demuestre a estos que no es asi de facil y vamos muchachos hagan uno que si anda bien y que sea industria bien Argento!!
Crude construction but very effective is what I would say! It could use much better construction practices and better
refinement but how is this burning of oil emitting these kinds of gases that you would ordinarily see such as with the
use of propane that gives us the clean blue flame that is most common to the use of propane or natural gases???
because the flame of a gas stove is a premixed combustion, basically the fuel is already mixed with air before it combusts. This makes sure that there’s no rich areas of fuel, which cause incompletely combustion, causing soot and a yellow flame.
Basically, blue flames mean very clean/complete combustion (very hot), while yellow flames mean incomplete combustion (less heat and more soot).
Nice
Thanks
To all viewers, please be careful in doing such projects using an old flammable gas tank material. The residual gas inside might explode when spark is produced during cutting.
I usually fill them with water before drilling/grinding just to be safe.
Luckily he's wearing his safety gloves.
Good thing you had your gloves on. I mean they look to do alot of good.
Appreciated thank you 👍
amazing
Glad you think so!
Редко встретишь напрасно потраченное время,
What cutoff wheel skills
Thank you
Valeu
Thanks for watching
Smells good😂😂😂
you missed the part about welding the cap on the back with the threaded pipe? y?
Suggestion mix dish soap in your cement & it will make your projects lighter with no loss in durability
Thanks for the tip
.@@creativeinnovationideas Don't believe it research it because I went to school for concrete work and it is sometimes used in cold climates as antifreeze but it definitely weaken the psi strength
Very very very god
thank you
on the first one.... are you blowing air into thru the larger pipe you installed into the burner ring... or is it sucking its own air in?
Yes sir
@@creativeinnovationideas❤❤❤❤❤
Can you control degree of flame?
nice gloves lol
Like you
☺️
Wow
Thank you for watching ☺️
These burners have a big problem, namely that they cannot be cleaned of the deposits from the burnt car oil.but probably if it works with used cooking oil, the deposits will be smaller
🎉🎉🎉🎉🎉🎉🎉
Whitch used oil you use idol? Cooking oil or car used oil?
Both
Paano papatayin iyan? Sana magawa mo din ang hydro water stove mas malinis at safe pa.
Amoy krudo yung niluluto
What is the milage (working duration ) of the one litter used oil? Please reply me. 🙏🙏🙏🎉🎉
Why the pipes? Shalom you're loved 💔
Bili ka ng gloves para sa safety mo.😂😂😂😂
Thanks 👍
What's if the table wasn't level? 😂👍
Thank you for watching 😊
Benta mo #1
ithank you for watching
New Glove Trend ?
😅 thank you for watching
Nagbebenta kaba sir ng gawa mong de use oil tnx sa reply at magkano poh.
Thank you for like the project but all my project is for giving ideas
Apparently these guys never heard of whole Saws.
Thank you for watching
hole saws
They're using half saws instead... not as efficient as a "Whole" saw though. 🤣🤣
Almost anything cast iron should be coated in oil and baked in an oven at 350 degrees for 15 min… imho
Unsafe pa rin, try mo patakan tubig kung ano reaction.ng apoy, mas maganda jan kung may takip ang chamber o ang burner kasi .magliliyab yan pag napatakn ng tubig
Boss Anu taas ng chamber mula sa flooring
9 cm my friend
At 9 minutes into the video it doesn't show what air pump or fan was used to blow air through the pipe and the holes in the burner. That's the way it works I understand but why not show what forced air method?
Цемент от перегрева взрывается
Bilhin ko nalang gawsa mo brod
Thank you my friend
How much oil required for 1 hour burning
500ml
Aonde eu compro essa ventoinha?
Online shops
tag pila na boss pwde order ko
Not available my friend
pag saba na ok order ko
It appears the oil supply valve is turned off.... So where is the fuel coming from?
there is only the right level of oil that can be put inside the chamber and it takes 10 to 15 minutes
Smells good 🤣🤣🤣
& u bad with that cutting tool. & U give me courage to weld. It ain't gotta be pretty it just has to work! 💪🤌
I appreciate that
I had to turn it orff because the muzak was shite and soe were the diy technics !
Intersted
Great 👍
THUMBS DOWN ! NO EXPLANATION !!!!!!!!!!!!!!!!!
How to clean the last unburned residue in the furnace?
there is almost nothing left inside if the fire is used up, so there is no need to clean it,
So the oil is just used like an oil lamp or something? The burner is just an air supply? I thought the oil would be pressurized or at least continuously fed and through the burner and burn like any other fuel. Looks like you just threw oil in a rocket stove and hoped that paper and sticks would eventually ignite it.
You should try with oil dripper instead you could have constant feed of oil and ne need to refill all the time
Thank you for advise
Magkano naman po kung magpapagawa ?
For content only my friend
Hello boss magkano pagawa order ako
bosing poyding bumiki Po ? magkano Po bayan?
No
a primeira ja é uma fraude ele ta usando gás no cano de baixo, a proposito todos estão recebendo gás , ou seja fraude em todas 😁🤣🤣🤣🤣🤣🤣🤣
whats the point , still using woods?
For me much better mix with woods because it is natural burning mechanism
Da buat flower dari bawah ke aras ini flower dari samping pake t dear ada gk beda kerja flower daruuai bawah keatas dan apa beda flower dari sampin8ng
T is good, used 3mm & 1.5mm
Sinapat ng inyong trabaho
Соблюдайте технику безопасности
Thank you for the tips
PINAHIRAPAN MO ANG SARILI MO MASYADUNG MARAMING PROSESO AT GAMIT BUMILI KANALANG NG GAS STOVE NGA NGA KARIN UMAYOS KA
What type of oil waste ? It is that of gas?
Used engine oil
@@creativeinnovationideasis it safe or carcinogenic?