nice! Add a suply tube to let more used oil to drip in and it will burn continually. I made one out of a small tank. I put a 2 inch piece of exhaust pipe in on one side near the bottom and a curved down piece on the upper oposite side. I ran a gravity line in for the oil. I put a fan on the lower 2 inch pipe. I welded a 2 inch nipple in the top with a cap. To get burning let a bit of oil in and drop a few strips of cloth soaked in diesel through the top. when the oil is burning, cap the top and turn on the fan. Heat coming out the curved pipe will melt aluminum.
Your idea is outstanding, your application is crude but effective. How long does 100mm last, have you considered a drip feed for continuous use. Good invention.
Nice concept, now it needs to be reduced in size to about 1/4 so it can be used as a stove or heater with a conventional heatilator tube type heat ex hanger and conventional exhaust for home use. Also, was the-temperature shone in F or C?
I wouldn’t use it for cooking or inside of anything, good for makeing a forge with or building a heat transfer somehow to heat a place, you don’t want those fumes building up or getting on anything you consume
Waste vegitable oil + blue flame good for inside. Fresh air intake adjustable would be beneficial for breathing healthier. I ran wvo no chimney or fresh air gor yrs in shop but i preheated the vegi oil in tank and nozzle
Love the blue flame which few others achieve. One caution, welding galvanized pipe, or zinc plated fasteners is very hard on your lungs. Dip them in muriatic acid for a few minutes to make it safe to weld.
I wonder of you could surround this with a refractory clay or something then build a mini mass heater and an exhaust going outside to eliminate the fumes.
Nice design but Lack of proper air ventilation will result in unstable flame inside the chamber, if you turn the blower into minimal flame will eventually stop.
Taste of the fuel will impact food, depending on method of cooking 1 ....and for the same readon you not supposed to put oil on your skin is the same reason you dont put in in your mouth.
Neat idea. But why the hell did you use galvanized material for the "burner head"? Terrible material selection choice... That zinc coating will degrade and burn-off. Zinc fumes are extremely toxic. Of course, so is the burning oil... but the nonetheless, black-iron fittings & pipe would have been a more appropriate choice (stainless steel would be superior!). In any case, thanks for sharing.
The hole or pipe that exits the fire is too big, if it were smaller the hole that exits the fire might be better than before and there should be more holes at least 6 or 8.
the end plumbing parts making up the final end of air chamber on this one with air holes in it (8 and 12) ...being what appears to be of a larger air volume size than the one you made in build below.....does it result in a slight upgrade from link below or did it turn out about the same in your view? ruclips.net/video/tqEeWTz9eVo/видео.html are you determining size and number of holes based on anything in particular such as ratio between size of oil tub , size of air chamber , size/number of holes air exits?
Its hard to use that and give you an hard time to clean the cooking equipments specialy under the pan to much oily and black spots and the smell of that is very disgusting
Veľmi ekologické 😂😂😂😂😂 viac takýchto vynálezov na starý olej a zemeguľa bude čistejšia 😂😂😂😂😂 eko-aktivisti musia mať z vás veľkú radosť že sa takto staráte o čisté ovzdušie 😂😂😂😂😂😂😂😂😂
The precision and attention to detail is mind-boggling 😂
Hadji there is ready for a job as NASA with his Precision and Skill's.......LMAO !!!!!🤣
Would like to see how you would add an oil feed for long term burn
Ur grinder skills r off the charts
Thank you
Said No One Ever
nice! Add a suply tube to let more used oil to drip in and it will burn continually. I made one out of a small tank. I put a 2 inch piece of exhaust pipe in on one side near the bottom and a curved down piece on the upper oposite side. I ran a gravity line in for the oil. I put a fan on the lower 2 inch pipe. I welded a 2 inch nipple in the top with a cap. To get burning let a bit of oil in and drop a few strips of cloth soaked in diesel through the top. when the oil is burning, cap the top and turn on the fan. Heat coming out the curved pipe will melt aluminum.
Thank you for sharing
That's wonderful
Sometimes the first one made is not always the best, but we give all the credit to the first inventors.
Your idea is outstanding, your application is crude but effective. How long does 100mm last, have you considered a drip feed for continuous use. Good invention.
Many thanks, 100ml takes 15-20 minutes depends on the volume of blower
Nice concept, now it needs to be reduced in size to about 1/4 so it can be used as a stove or heater with a conventional heatilator tube type heat ex hanger and conventional exhaust for home use. Also, was the-temperature shone in F or C?
Great point!, temperature I used c
U don't wanna use that in the house
I wouldn’t use it for cooking or inside of anything, good for makeing a forge with or building a heat transfer somehow to heat a place, you don’t want those fumes building up or getting on anything you consume
Or use to melt steel 😂
Waste vegitable oil + blue flame good for inside. Fresh air intake adjustable would be beneficial for breathing healthier.
I ran wvo no chimney or fresh air gor yrs in shop but i preheated the vegi oil in tank and nozzle
Love the blue flame which few others achieve.
One caution, welding galvanized pipe, or zinc plated fasteners is very hard on your lungs. Dip them in muriatic acid for a few minutes to make it safe to weld.
Appreciated ❤️
MacGyver and the 'A' Team send their love
Thanks
I will make top exhaust like this in my waste oil stoves thanks for the idea.
No problem 👍
great invention, but is it safe, it may contaminate the food your cooking from the burning engine oil?
YESSSSS
You own a welder but not a drill? This is really cool though.
A welding machine but no welding hood....Not Amazing
Ok the grinder finesse cutting the saw blade into a circle was fucking legendary.
Thank you
Very good.
A question though, how long does the amount of oil you added lasts.
15 - 20 minutes depending on the controller
@creativeideas5041 Thank you, and all the best.
Esta muy bueno voy a intentar hacerlo para saber como me sale
Thank you 😊
If that's galvanized pipe, be very careful not to breathe the fumes, very bad for you.
Yes , i was poised after welding , and I was 12 days terrible sick including medication
Yet, you can warn and warn, and few pay any attention.
Great ideas thanks you
Thank you
Thanks for sharing this video
My pleasure
i have seen all of the parts of the previously made stoves at your channel and it is best one you made,
very creative keep it up brother.
Thank you so much
Very creative idea thanks for sharing ❤
You are so welcome!
Need a way to maintain oil level so you don’t have to take top off each time. Great burner
Great point!
Nicely done
Thanks for the visit
Nice idea, upgrade version required now.
Enjoy it
Sinceramente es lo mejor que he visto hasta ahora en quemadores de aceite usado, felicitaciones
Thank you ❤️
Wow amazing. I have an idea. Ty for this video
Your welcome 🤗
great job
Thank you
Thank you for sharing this video! Very helpful!
You are so welcome!
Thank you great job
Our pleasure!
How do you replenish the oil when the stove is working?
I wonder of you could surround this with a refractory clay or something then build a mini mass heater and an exhaust going outside to eliminate the fumes.
Nice design but Lack of proper air ventilation will result in unstable flame inside the chamber, if you turn the blower into minimal flame will eventually stop.
Thanks for the tips!
Is that galvanized tubing you're using for the burners?
Yes sir
Your projects are amazing. Love you sir from Indian kashmir
Many thanks 👍
Very good idea
Many many thanks
Nice job sir❤
Keep watching
Thats a great design, how did you come up with that?
Thank you for watching 😊
That works , little fine tune with delivery, and ya got something .
Thanks
How long this fire will last for the 100 milli of waste oil ?
In your experiment i mean
Hi, 15 to 20 mins
SO . the oil burns down the chamber and air makes it blue.?
Yes sir
How do you replenish the fuel?
Realmente...como é abastecido o óleo ???
Olá, tudo bem? Voce usou óleo velho de motor?
Yes
Ok .belo trabalho.🇧🇷
Ganda idol😊good job😊 👍
Thank you 😁
I like it 👌
How long did it took to burn 100ml of oil?
Thanks, 20 minutes up my friend
Wonderful creation i like it❤
Thanks a lot 😊
Good ol dinosaur juice
Very nice 😊
Thanks 😊
Make it slide for cup. Because some people are afraid to put their hands close to the fire😊😊
Thank you for the tips
Nice diy 👍
Stay connected
Thank you
You're welcome
Excellent
Thank you so much
The fuel being dirty used oil, what about the fumes. Surely there should be black smoke.
Hiw to add oil if empty
Ang galing
Thank you 👍
No i spierdoliłeś porządną piłkę!!
Safety protocol if use in room?
How long to burn 100ml waste oil?
It takes 15 to 20 minutes depends on the volume of blower
@@Trendingnow-31 thank you
Hello, how many hours does 100 grams of motor oil burn?
It takes 15 to 20 minutes
What is it actually used for as shown ?
Nice build but what is it going to be used for?
How long does the 100ml last
15 to 20 minutes
Beautiful 😍
Thank you! 😊
Taste of the fuel will impact food, depending on method of cooking 1 ....and for the same readon you not supposed to put oil on your skin is the same reason you dont put in in your mouth.
I picked up a dc 5v fan with a USB plug on it. To me it's slow what should I look for?
You need controller 12volts
How much oil used in 1 hrs ?
Usually 100ml it takes 15 to 20 minutes
How can get
Brilliant
Appreciate 👍
No grate to hold a pot and it's gonna smell pretty gnarly when that spray paint gets good and hot.
The one thing I see as an issue is oil delivery. Need to be able to supply without having to disassemble the burner.
Thank you for tips
What's the CO2 content? Or carbon monoxide?
the endless music-loop is too loud compared to the working-sound. I have an hearing-aid and I have to switch sound off 😢
some day used oil will be worth a fortune
That's awesome 👍
How longer this will work
18 to 20 minutes 100ml
Oxygen level?
Where do you get the waste oil?
Used cooking oil/engine oil
Waooo keren bgt
Thanks for watching
Чем дольше горит,тем сильнее разогревается масло и начинает закоксовываться в тарелке.Потом чистить.
😮
Ni muzak
I'd like to hear work not music please
With this method there is no way to add more oil safely. Its really good though.
Blower fan aur controller ki kitni cost padhti hai
It coast like you are charging 2 phones
Only he can make this
Thanks
Aire is so spencil
Thank you
Hi where do you buy the fan with controller
Online shop
Neat idea.
But why the hell did you use galvanized material for the "burner head"? Terrible material selection choice...
That zinc coating will degrade and burn-off. Zinc fumes are extremely toxic. Of course, so is the burning oil... but the nonetheless, black-iron fittings & pipe would have been a more appropriate choice (stainless steel would be superior!).
In any case, thanks for sharing.
Many thanks 👍
It gonna take an awful lot of time to wash down your house and getting rid of the smell after using it a month or two. Best of luck.
Probably smells better than those lilac scented things my old lady plugs into the outlet🤮
Burn ethyl alcohol in a steel saucer in the room and the smell is gone.
Dear weare are you from
Thank you for watching
I'm skeptical this video is real, I've never seen waste oil burn so cleanly with such a blue flame. If its legit I'm impressed, but I remain skeptical
That's right , burn oil or kerosene deliver " orange flame "
Don't you have a drill for drilling holes ????
I used rods sometimes
The hole or pipe that exits the fire is too big, if it were smaller the hole that exits the fire might be better than before and there should be more holes at least 6 or 8.
That's good idea
مفيد جيد لو مكان كلينس وصله اضبيض احسن ويداوم مكان كل مره كلينس
Thank you appreciated 👍
the end plumbing parts making up the final end of air chamber on this one with air holes in it (8 and 12) ...being what appears to be of a larger air volume size than the one you made in build below.....does it result in a slight upgrade from link below or did it turn out about the same in your view?
ruclips.net/video/tqEeWTz9eVo/видео.html
are you determining size and number of holes based on anything in particular such as ratio between size of oil tub , size of air chamber , size/number of holes air exits?
But waste oil stove is present in home wastes due to oil expenses
Kipas iyng nya harga sampe berapa bos
2.85A
👍🏻
God
Thanks for watching
How can you use it if there's no electricity you've better buy a rice cooker
v gd
Thank you
Hello Asa ka karun
Thank you for watching
Its hard to use that and give you an hard time to clean the cooking equipments specialy under the pan to much oily and black spots and the smell of that is very disgusting
Даааа... Варить ты точно не умеешь 😂
The dangers of burning unrefined oil is well known, plenty of carcinogens in oil oil that pose a risk when burnt...
As. Well as welding galvanized pipe 😮
Living gives cancer my guy
Do a little bit of research and just the food that you're eating out of the stores. You'd crap your pants
Ik
It already was refined. It's not crude oil. You are disinformation.
😢😢😢😢😢😢
Poor video coverage
Veľmi ekologické 😂😂😂😂😂 viac takýchto vynálezov na starý olej a zemeguľa bude čistejšia 😂😂😂😂😂 eko-aktivisti musia mať z vás veľkú radosť že sa takto staráte o čisté ovzdušie 😂😂😂😂😂😂😂😂😂