I agree. They really preform well at max output. Have you tried yet? Unity on the other hand produces low volume but they’re programmed that way I think to help prevent users from blowing the tweeters which was a common issue in the TS3 series.
@@DjSmoothNYI’m looking to buy a new set of speakers and I’m new to everything but I’m just wondering could u tell me when u use the mix out option through to the second speaker with two inputs connected in the first one does that make it much louder than it would be on it would be for just one speaker?
Would we hear both the voice and guitar when the output from speaker one was plugged into the input of speaker two, which was being used as a monitor, as demonstrated near the end of this video?
I've got the TS308's and am pretty sure that I'll add a TS408 or two, but I just can't seem to get answers as to how to connect a bluetooth signal through these to a subwoofer, and why is the bluetooth signal not available on the xlr output?
It’s the way they engineered them that prevents the mix out and Bluetooth to work together. I tried using xlr in, turned on Bluetooth thinking I’d save cable space and nothing! I thought it was broken until I came across this video, lol.
yes, I have a pair of TS412's and we use intro music to a few songs in the band I play in via the bluetooth function from my iPhone, the bluetooth and mix applications are independent and can be used at the same time.
I just got an Alto TS410 and the Sig/Limit is on showing orange even when I have nothing connected, when I connect via Bluetooth, it remains on even at low volumes and the audio will switch from being clear to sounding like you’re hearing it underwater. Any suggestions as to how I can fix this, thanks!
what kind of speaker would you suggest for life digital piano playing? no need for extra volume between 12 or a 15 inch, i'm looking more for a warm sound
Have u taken them out yet and what do u think? I picked up a set as well. Seems pretty loud but so do my Mackie Thump15A’s and I won’t know how these hold up until my gig on the 21st.
Great ?? I once had ts315’s and returned them right away after I started reading tweeter blow up posts. Recently I purchased a pair of ts415’s after researching that the highs now have 450w RMS and 800 RMS for lows. That seems pretty hard to blow. But for some Dj’s who don’t gain stage their levels and hit red, that will ruin any powered speaker quickly lol.
Hi, this video is the reason I got 2 15’s of these. They were working fine, but now they are glitching, albeit me having the music source next to them. I have troublehoot them a couple of times, but they continue with the glitch. What can be causing this?
I noticed that you didn't mention anything about the "Speaker Use" button. I have these speakers and regardless of what you set it to, the sound is the same. The button does essentially nothing.
I have four TS410. There is not a "Thru" signal out, just "mix out". How would I connect these four units in series mono and have the signal even on all speakers so the output sound level is equal? Would I set the volume using the first unit in line, then max out the input on the remaining three? I don't want to waste time setting each speaker input to match the volume of each. I have subwoofers to connect also, and I want to "daisy chain" all full range and sub speakers together with equal line level inputs. Thanks.
You have to max out on the other 3. Not sure why they programmed them that way but they’re even enough when done. I tried it myself before. I noticed the speakers are very tame until you hit 3 o clock through 5.
Hello, i am interested if i can put left and right signal input in one speaker and then use output from the same speaker to another speker, is it possible?
Hello! Yes, this is possible-one can connect the stereo L/R outputs from a line-level device into the CH1 & CH2 inputs on one TS4 speaker, then use an XLR cable to connect the MIX OUT output of that speaker to an input on another TS4 speaker (make sure to set all channel switches to LINE in this setup). Keep in mind that both speakers will carry both the left & right channels of your sound source in this situation, so the two speakers won't act as a stereo pair (with the left speaker carrying only the left channel and vice versa).
@@inMusicBrandsSupport thank you for your promt feeback. Can you tell me what is a difference betwen stereo piar and non stereo in this situation? Is there any differenec in sound quality?
@@shalva098 The difference in this situation is that both TS4 speakers would carry both the L & R signals from the sound source, as opposed to connecting the L & R outputs individually to separate speakers (which would yield one speaker carrying the left signal and one carrying the right signal). There will be no difference in sound quality, but since both L & R outputs are being sent to both speakers as a summed pair, any panned sound from the sound source will not be represented in the speaker configuration. For example, if a song you're playing has a synth riff panned hard left, and a guitar riff panned hard right, both the synth and guitar riffs will play at equal volume through both speakers, as opposed to a dedicated L/R speaker configuration which will more accurately represent the panning of the sound source.
@@inMusicBrandsSupport now understood and thank you for your explanation. Also what i noticed when i divide L&R signals betwen two speakers the music output seems less strong then in terms of summed piar and that why i thought that summed piar is better to get high output from the speakers.
I am using a iPad and dynamic mic through a mixing desk and then via XLR cables to the speakers. However the sound distorts dreadfully! Any ideas please??
@@lincolnlee6595You’re correct. It produces to much distortion because it’s not designed for audio. Max the source gain instead while using line input and save your speakers from premature failure. When I want to get super loud I just add 2 more 15’s and trust me the sound is amazing, even without subs.
The only parts of the TS4 signal chain latency applies to are when a Bluetooth sound source is connected or when two TS4 speakers are linked together in a stereo pair. In cases of delay between a Bluetooth sound source and a speaker, try moving the sound source closer to the speaker, or power cycle the sound source and/or the speaker. Likewise, when there's a delay between two Stereo-Linked speakers, power cycling the audio source and/or the speakers should do the trick!
The voice indication for pairing or any should at am is ALWAYS bad. There's never a need to hear "Bluetooth pairing" Never. Pairing should be nothing more than a blip. That alone will deter me from buying this.
Hi there, you can turn off the voice prompts on any of the TS4 Series speakers by pressing & holding the Bluetooth "PAIR" & "STEREO LINK" buttons until you hear the speaker say "voice off". Pressing & holding these buttons again will turn them back on, and you'll hear "voice on" to confirm this.
@@inMusicBrandsSupport Good. Thanks for that. I hate any bluetooth device that has those pairing sounds. Totally unnecessary and annoying. We can tell when it's paired.
@@indigos290 I just got the fright of my life when i heard BLUETOOTH PAIRING after trying to connect to these straight out of the box. Loud enough to wake Jesus.
![Natanael Cano - Amor Eterno [Official Video]](http://i.ytimg.com/vi/EO4prCs6WpM/mqdefault.jpg)
This is one of the best demo videos I have seen for any prouct. Excellent!
I have the Ts410. Great speaker for its size/price.
Thank you, this video really explains I detail how to correctly set them up.
I have a pair of the TS315 and these speakers are great.
Me too
I have one TS415 for my bedroom and it sounds phenomenal. The TS415 is worth it
@@adamplummer2994 it sure is. I have a pair of the ts415 as well. They sound just phenomenal.
I agree. They really preform well at max output. Have you tried yet? Unity on the other hand produces low volume but they’re programmed that way I think to help prevent users from blowing the tweeters which was a common issue in the TS3 series.
@@DjSmoothNYI’m looking to buy a new set of speakers and I’m new to everything but I’m just wondering could u tell me when u use the mix out option through to the second speaker with two inputs connected in the first one does that make it much louder than it would be on it would be for just one speaker?
Pretty good information. Thank you
Excellent!!
Thanks a lot for this wonderful review 👊👍
Would we hear both the voice and guitar when the output from speaker one was plugged into the input of speaker two, which was being used as a monitor, as demonstrated near the end of this video?
Great this helped me out alot
I tried 312 in the past, but now i got ts412, which are better.. bluetooth is a good improvement...
I press the Stereo Link buttons but they just keep BEEPING, they're literally right next to each other and WON'T connect.
Help.
I've got the TS308's and am pretty sure that I'll add a TS408 or two, but I just can't seem to get answers as to how to connect a bluetooth signal through these to a subwoofer, and why is the bluetooth signal not available on the xlr output?
It’s the way they engineered them that prevents the mix out and Bluetooth to work together. I tried using xlr in, turned on Bluetooth thinking I’d save cable space and nothing! I thought it was broken until I came across this video, lol.
Can you use the Bluetooth input and both line/mic inputs (all three) at the same time?
yes, I have a pair of TS412's and we use intro music to a few songs in the band I play in via the bluetooth function from my iPhone, the bluetooth and mix applications are independent and can be used at the same time.
I just got an Alto TS410 and the Sig/Limit is on showing orange even when I have nothing connected, when I connect via Bluetooth, it remains on even at low volumes and the audio will switch from being clear to sounding like you’re hearing it underwater. Any suggestions as to how I can fix this, thanks!
what kind of speaker would you suggest for life digital piano playing? no need for extra volume between 12 or a 15 inch, i'm looking more for a warm sound
What cable do I buy to connect two of this speakers together
Bagaimana cara mengecheck produk asli dari alto ts415 pak?....
What about if my signal limit turn just red and the speakers shut off even if l got the volume too low ?
When using it with the Dj Mixer, in this video the Speaker Use light is at "EQ Off." Should it be on "Dj" ?
It’s just an EQ setting. I’m assuming if you set it to DJ it just adjusts the lows a couple db higher
Can these be used on the Denon prime go threw Bluetooth anyone no
Just bought a pair of these, TS-415 and judging by the rated RMS I cannot wait to go along to the club's and put their windows out for them 😂😂😂
Have u taken them out yet and what do u think? I picked up a set as well. Seems pretty loud but so do my Mackie Thump15A’s and I won’t know how these hold up until my gig on the 21st.
@@DjSmoothNY so how did they held up?
They said 2500 watts i will say maybe 700 or 750 real rms continuos watts 😂 😎 2500 peak maybe for few seconds so They are ok for the price
1000 watt rms@@bladimirperez5073
Can this be played in stereo? If you have one alto speaker.
How much is the ts 415 speaker that can connect the guitar and microphone?
how long before the tweeters start going out on these. i was very disappointed with the 315s that i had
Great ?? I once had ts315’s and returned them right away after I started reading tweeter blow up posts. Recently I purchased a pair of ts415’s after researching that the highs now have 450w RMS and 800 RMS for lows. That seems pretty hard to blow. But for some Dj’s who don’t gain stage their levels and hit red, that will ruin any powered speaker quickly lol.
Do you have a speakers that can acoustic guitar and microphone?
Can you Equalze the sound separately on the inputs? or is the EQ applied to all the inputs?
EQ settings are applied to the entire speaker, whether via the Speaker Use presets on the speaker itself or via the Alto Pro app's 6-band EQ setting.
Hi, this video is the reason I got 2 15’s of these. They were working fine, but now they are glitching, albeit me having the music source next to them. I have troublehoot them a couple of times, but they continue with the glitch. What can be causing this?
He said to contact Alto professional/ support
I noticed that you didn't mention anything about the "Speaker Use" button. I have these speakers and regardless of what you set it to, the sound is the same. The button does essentially nothing.
Hello, If i am pairing ts318s with a ts415 top what setting should the sub be in? TS3 or Hi-Pass/Bypass mode
I have four TS410. There is not a "Thru" signal out, just "mix out". How would I connect these four units in series mono and have the signal even on all speakers so the output sound level is equal? Would I set the volume using the first unit in line, then max out the input on the remaining three? I don't want to waste time setting each speaker input to match the volume of each. I have subwoofers to connect also, and I want to "daisy chain" all full range and sub speakers together with equal line level inputs. Thanks.
You have to max out on the other 3. Not sure why they programmed them that way but they’re even enough when done. I tried it myself before. I noticed the speakers are very tame until you hit 3 o clock through 5.
But why is there no scenario about using a mixer? What am i missing here?
If you have 1 speaker can you put left and right output from your controller into channel 1 and channel 2 of the alto speaker?
indeed you can.
i use a mixing desk and i connect the desk output leads to the altos two inputs no problem.
hope this helps.
@@whamni thank you so much
hi is there anyway to get the old alto delta app version to ipad or ihone pls help me.
Wish the app was touched on a lil in this video
We also have a video on using the Alto Pro mobile app with the TS4 series! Check it out: ruclips.net/video/1f8nvEqa0OQ/видео.html
@@inMusicBrandsSupport thanks appreciate the quick response
Can i connect TS415 to another TS say TS412? Thanks
Yes
how do you turn off or at lessen the volume of that annoying "bluetooth voice" when connected?😢
between ts 412 and ts 415, what is the best ?
They are both the same but ones bigger than the other one
15’s carry more low end and a louder. 12’s do get loud but they produce a sharper tone.
Hello,
i am interested if i can put left and right signal input in one speaker and then use output from the same speaker to another speker, is it possible?
Hello! Yes, this is possible-one can connect the stereo L/R outputs from a line-level device into the CH1 & CH2 inputs on one TS4 speaker, then use an XLR cable to connect the MIX OUT output of that speaker to an input on another TS4 speaker (make sure to set all channel switches to LINE in this setup). Keep in mind that both speakers will carry both the left & right channels of your sound source in this situation, so the two speakers won't act as a stereo pair (with the left speaker carrying only the left channel and vice versa).
@@inMusicBrandsSupport thank you for your promt feeback. Can you tell me what is a difference betwen stereo piar and non stereo in this situation? Is there any differenec in sound quality?
@@shalva098 The difference in this situation is that both TS4 speakers would carry both the L & R signals from the sound source, as opposed to connecting the L & R outputs individually to separate speakers (which would yield one speaker carrying the left signal and one carrying the right signal).
There will be no difference in sound quality, but since both L & R outputs are being sent to both speakers as a summed pair, any panned sound from the sound source will not be represented in the speaker configuration. For example, if a song you're playing has a synth riff panned hard left, and a guitar riff panned hard right, both the synth and guitar riffs will play at equal volume through both speakers, as opposed to a dedicated L/R speaker configuration which will more accurately represent the panning of the sound source.
@@inMusicBrandsSupport now understood and thank you for your explanation. Also what i noticed when i divide L&R signals betwen two speakers the music output seems less strong then in terms of summed piar and that why i thought that summed piar is better to get high output from the speakers.
I am using a iPad and dynamic mic through a mixing desk and then via XLR cables to the speakers.
However the sound distorts dreadfully! Any ideas please??
Maybe overgain
Try to set to line level and set to 9 oclock setting first
@@solidstatelightsandsoundrental I made a school boy error.
Setting was on 'mic' not 'line'.
Perfect now.
I used Line level connected to my mixer but its not loud compared to mic level what did I do wrong?
Did you know what the problem was? also for me it is stronger in MIC option
I still dont know. I still uses the mic but I don't maximize the knob. I always make sure that the limit doesn't go red.
When U use the Mic option, doesn't it sound slightly distorted especially when its turned up higher?
As long its not going red it sound good.@@lincolnlee6595
@@lincolnlee6595You’re correct. It produces to much distortion because it’s not designed for audio. Max the source gain instead while using line input and save your speakers from premature failure. When I want to get super loud I just add 2 more 15’s and trust me the sound is amazing, even without subs.
How's alto ts4 series on latency? Any voice delay?
The only parts of the TS4 signal chain latency applies to are when a Bluetooth sound source is connected or when two TS4 speakers are linked together in a stereo pair. In cases of delay between a Bluetooth sound source and a speaker, try moving the sound source closer to the speaker, or power cycle the sound source and/or the speaker. Likewise, when there's a delay between two Stereo-Linked speakers, power cycling the audio source and/or the speakers should do the trick!
@inMusicBrandsSupport ok got it, thanks brotha
We use the ts4 12 and the bass 1x15 subs , the sound seems to be either very toppy or very bassy.nowt in the middle...
I would just add another 15 or 2. No subs, trust me u won’t regret it.
The voice indication for pairing or any should at am is ALWAYS bad. There's never a need to hear "Bluetooth pairing" Never. Pairing should be nothing more than a blip. That alone will deter me from buying this.
Hi there, you can turn off the voice prompts on any of the TS4 Series speakers by pressing & holding the Bluetooth "PAIR" & "STEREO LINK" buttons until you hear the speaker say "voice off". Pressing & holding these buttons again will turn them back on, and you'll hear "voice on" to confirm this.
@@inMusicBrandsSupport Good. Thanks for that. I hate any bluetooth device that has those pairing sounds. Totally unnecessary and annoying. We can tell when it's paired.
@@indigos290 I just got the fright of my life when i heard BLUETOOTH PAIRING after trying to connect to these straight out of the box. Loud enough to wake Jesus.
Do you have an Instagram
My signal limit light on red what should I do???
Any help??
@@ChrisPaul-lq2kyturn down the gain on the speaker until it’s green again