I've had to deal with the compressor often, and I had only understood half of it, but the visuals here helped me a lot. Your explanation was perfect. Keep it up, people will stay once they watch. Maybe make 2 or 3 thumbnails and rotate them for the same videos to increase your exposure and improve click-through-rate.
Thank you, I really just wanted to hear how the one knob compressor on the Yamaha desk sounded and you did that so thanks. Also for the explanations - thumbs up :)
I'm trying to see how one knob compression works on the Yamaha MG06X. Brilliant videos btw. Any ideas if on the Yamaha MG06X, is one knob compression used on channels 1L and 2R & you alter it with the gain? Or does gear4 music have their specs wrong on their site?
You're always a blessing. In my church a front of house mix from Yamaha digital mixer supplies to MG6 used for live streaming and the input source is usually very hot especially during singing. What's the best relationship between the Gain, channel know and the Master know levels?
Thanks for making this. I, too, find 12:00 is usually a sweet spot for vox. Was just wondering what settings are under the hood of these things, and to my surprise, you answered that question! Thanks! Are the numbers in the manual?
¡¡GRACIAS!! Estoy aprendiendo a usar una de estas consolas pequeñas y no entendía bien el tema de la compresión. GRACIAS a este video tengo una idea más clara de cómo abordarlo. De nuevo. ¡GRACIAS!
Hi, do you think the compressor would be suitable for Pub karaoke with a mixture of people singing too softly and yelling into the mic? 🤔 Thanks for the great video!
While basic, I think these would have been a very useful feature if they had been implemented on Portastudios back in the day, given the limited dynamic range of cassettes.
One thing about compressior i worked in radio station before they use a behinger compressior pro i noticed my voice sounds like im breathing hard thats because there really compressing the audio
I have a Yamaha mixer. What do I do to prevent feedback? Do I adjust the "gain" knob, "compression" knob, or the "volume" knob? If so, do I adjust it up or down? Thanks.
Wow, awesome video. I just start considering the Behringer Xenyx Q802 but I was curious about how the one knob works. Thank you so much, it help me a lot!
no.. only to that specific channel. The other two channel doesnt have it so i wouldnt use it for vocals. If you need more than 2, get a bigger mixer board or you can run racks.
That was the BEST explanation of compression I have EVER seen!
I know, right!? 😮
You’re really good at explaining things. Well made tutorials. Cheers
Glad you like them!
I've had to deal with the compressor often, and I had only understood half of it, but the visuals here helped me a lot. Your explanation was perfect. Keep it up, people will stay once they watch.
Maybe make 2 or 3 thumbnails and rotate them for the same videos to increase your exposure and improve click-through-rate.
Amazing.
1 knob compressors are so nice for people who don't want to learn too much and still have it work intuitively !!
Three year old video is still the best explanation of compression I've been able to find. Thanks a lot!
Thank you, I really just wanted to hear how the one knob compressor on the Yamaha desk sounded and you did that so thanks. Also for the explanations - thumbs up :)
Thanx! Just going from Soundcraft to Yamaha one of the upgrades was compression…the one knob approach looks useable
Nice, concise, down to earth explanation of a very difficult concept! Thanks!!
Amazing content. Because of your reviews etc... I now have the Yamaha, Shure, and Cloudlifter etc...
I getting more better understanding on how and when to use Compressor.. thanks so much for this tutorial..
Your videos are so good! I bought this exact mixer and your videos have been gold
Nice! Good luck with whatever you're working on!
Literally the most perfect video about this topic that I could imagine
Thank you for the simple and nice explanation 👍
You are welcome!
Your expression and explanation are good, you really took your time, but am new to this, how best can you help me?
I'm trying to see how one knob compression works on the Yamaha MG06X. Brilliant videos btw. Any ideas if on the Yamaha MG06X, is one knob compression used on channels 1L and 2R & you alter it with the gain? Or does gear4 music have their specs wrong on their site?
You're always a blessing. In my church a front of house mix from Yamaha digital mixer supplies to MG6 used for live streaming and the input source is usually very hot especially during singing. What's the best relationship between the Gain, channel know and the Master know levels?
This is the best explanation ever. its very clear and helpful ,Thanks
Thanks Jordan great video!
Thanks for making this. I, too, find 12:00 is usually a sweet spot for vox. Was just wondering what settings are under the hood of these things, and to my surprise, you answered that question! Thanks! Are the numbers in the manual?
There is a diagram printed on the mixer itself that shows the compression ratio.
@@kettnercreative Too cool! Thank you :)
How would you guys generally set the one knob compressor for kick drum snare drums and toms?
Finally a good explanation, I get it now!!!1 Thank!!!
Glad this helped
What a great explanation, Thanks
¡¡GRACIAS!! Estoy aprendiendo a usar una de estas consolas pequeñas y no entendía bien el tema de la compresión. GRACIAS a este video tengo una idea más clara de cómo abordarlo. De nuevo. ¡GRACIAS!
Awesome video!
Thank you so much!
Very helpful
Super! J’ai la même console que toi! I have the same mixer as you showed..
Merci!✌️🎼
Hi, do you think the compressor would be suitable for Pub karaoke with a mixture of people singing too softly and yelling into the mic? 🤔
Thanks for the great video!
While basic, I think these would have been a very useful feature if they had been implemented on Portastudios back in the day, given the limited dynamic range of cassettes.
For sure! I always leave the dbx or Dolby nr switched on when I record, because the noise reduction is a compressor.
Thanks for the explanation, very well made
Thank you so much, your videos are very helpful. 💚🌿
Absolutely awesome and informative video!
Thanks, Mr. Kettner!
Perfect video, thanks.
Should I run my controller through the 1 knob compressor?
How is the Yamaha compressor sounding compared to Mackie profxv3’s compressor? Are those all digital compressor or analog compressor? Thanks.
Thank you sir for your packaged information
Excellent explanation
Does it means less compression for bassy vocal to make it sound brighter?
What is the different in using a compressor and a di box and can I use both 🤔
Whats the best ratio on that one knob of compression that you use for vocals and other instruments?
One thing about compressior i worked in radio station before they use a behinger compressior pro i noticed my voice sounds like im breathing hard thats because there really compressing the audio
This one knob compressor also works with condenser microphone ??
I have a Yamaha mixer. What do I do to prevent feedback? Do I adjust the "gain" knob, "compression" knob, or the "volume" knob? If so, do I adjust it up or down? Thanks.
Excellent video
Great video, thanks!!
is compression works on dynamics mic only or it works well too on condensor mic ?
Thank you!
Wow, awesome video. I just start considering the Behringer Xenyx Q802 but I was curious about how the one knob works. Thank you so much, it help me a lot!
Thanks for making this video! I get a clipping sound when I set the compressor knob to max, any idea?
You need to turn the gain down
@@kettnercreative I'll try that. But is it okay to put it in max? What is the ideal setting?
Perfick. Thanks for sharing
So, which way do we bypass the compression? at 0 or 10?
0 will bypass the compression.
You ROCK.
Excellent video, tyvm!
Glad you enjoyed it!
Thank you so much 😊 It really works 😊
Welcome 😊
Thanks bro
thanks - amazing
It is useful
It sure is
why feedback when used one knob compressor?
If you use all 4 channels by connecting Mics to it, does that one compressor knob compress all 4 mics??
no.. only to that specific channel. The other two channel doesnt have it so i wouldnt use it for vocals. If you need more than 2, get a bigger mixer board or you can run racks.
Really great video thanks!
Glad you liked it!
Can the compressor be used in live performance when doing high notes and low notes
The compressor can certainly be used in a live performance. It will compress all frequencies at an equal rate.
Hi which mixer is best when it comes to effects yamaha or soundcraft. Thanks in advance.
Allen and heath
In Windows, you can set the audio input volume from 0 to 100. Should it be set at 100?
yes
You look like Captain Cold from the Flash
Great
Thank you SO MUCH
You're welcome!
Why didn't you turn the compressor up and move the mic farther and closer so we can see the actual compressor getting to work
ㅇ0O Thanx,,! This video is exactly what I was looking for!
Geez I watch a lot of your videos. Lol
Glad you find them helpful!
Q: How do you use a one-knob compressor?
A: By turning that one knob.
Who could've guessed?
👍
He Yamaha compression Doesntt work on a kick drum. The initial hit blasts straight through that 25 ms attack.
but now the narrator's plosives are louder :,(