Это видео недоступно.
Сожалеем об этом.
Rear brake pad replacement 2008 Hyundai Tiburon Rotors Install Remove Replace
HTML-код
- Опубликовано: 21 фев 2014
- Rear brake pad replacement 2008 Hyundai Tiburon Rotors. Install Remove Replace How to Change.
Not too bad of a job, there are different ideas on the rotors, machining the old ones verses replacing them.
This video should be good for general rear disc brake replacement understanding.
Here are some years and models that this will cover for the Hyundai product line.
This vehicle seems to require that you turn in the rear piston into the rear caliper, while other models seem to just push in, with no turning required. Due to the emergency brake setup.
2003, 2004, 2005, 2006, 2007, 2008, 2009
Tiburon GS, SE, GLS, GT, Limited
Like the Facebook page, find me here. / fixingcarsandstuff
This Channel provides videos for informational purposes only and cannot be held liable for injury, damage, problems that arise when trying to duplicate steps shown in videos.
Outtro music snippet, by: joshwoodward.com/ Good To Go - Josh Woodward
creative commons license.
Hiyundai Tiberian??
Thanks bud. I’ll be using this video to replace rear rotors on my 04 tiburon gt v6 as a tutorial.
The thing with the needle nose pliers and the caliper piston saved me from bleeding my break fluid!
Here I am 7 years later watching this again as I get ready to do my brakes
Thank you for this video!!! My son drives his Tiburon Fast and furious. You saved me a fortune on brakes! ❤
Thanks for that video! Been working on collapsing the piston on my 2008 Tiburon for about an hour now... Seems like it was easier than I thought... haha. Thanks again.
Excellent video, thanks
Man Thank you so much.. other people was saying to push it but only this way worked!! THANKS
Great vid for someone new to auto repair. Thanks a bunch.
Great video, thanks for taking the time to make and post it!!
rightie ..tighty...all rightie then... that is burned in to my brain.. great vid .got me out of a spot with winding the piston in..never done one before... piston had siezed ..poped it out with handbrake leaver
Solid video. Rear rotors may need quite a beating if its rusted on there. PB Blaster and a hammer will pop it loose if its rusted.
What torque for reassembly for the 14mm caliper bolts? in-lbs ??
I am so frustrated right now trying to change my own rotors, I go to look up a video and this guy cuts from one scene to the other, does not show him taking off the original rotor 🤦♀️ so that screw needs to come off right? I’ve taken the bolts off of the back, I cannot get that screw off my stepdad has tried he cannot get the screw off; i’m wondering if the cat needs to come off because in this video this man never removed any sort of cap … I just absolutely hate it when people cut from one scene to the other and they just have the new part on
Not trying to diss your video dude, but it’s a big help when we can just see everything you have to do..
If the screws aren't turning can you turn them out and clean them up?
i have a 03 Tiburon and the piston is very hard to turn and won't collapse... what could be the probably? do i need to replace the caliper???
I like how he pronounces every letter in the cars name. So he lets everyone know that he is definitely a white guy. And I can say this because I live in an area where most of the town names are not spelled as they sound and I hear it every day.
Hiundai Tibereon
Tib-er-on.
do you just keep the handbrake attached to the caliper, no need to dismantle it to make sure everything moving freely, ive got the 2007 Tiburon and im getting a slight squeak from the off side rear wheel so I jacked it up and checked the bearings and bushes, everythings solid so im diagnosing it as sticking pads and I now need to service the brakes but I didn't want to disassemble the springs or anything in case some parts flew off and got lost, thought id come here to get advice first, I'm glad im doing them they look as if they need a bit of love.
I’ve got an 07 as well. After replacement the passenger rear brake is making a churning sound when driving. When I brake it goes away and the wheel isn’t hot, everything is intact and tight. Any idea what may be causing the sound?
What are the dimensions of the breakpads?
I'm having trouble collapsing the piston, I tried using the c clamp but I'm unable to compress it. I was told to take the cap off the area where the brake fluid goes and that would help. Any help would be greatly appreciated.
Travis Davis Well, for this video you need to turn it while pushing in. 3:30 mark...
I had the same problem myself today. I tried with the C-clamp and I couldn't get a good grip on anything with the C-clamp. He used some needle nose pliers and turned the piston until it collasped all the way in.
Ty!
Damn. Turn it .... that's what I wasn't doing.
Kevin Hill question; were you trying to push the piston in because that's what I'm currently doing.
Why didn't he show the removal of the rotor?, and it's a Hyundai Tiburon.... aka Shark.
tigerboy60 exactly shark I always telle my girl baby my car looks like a shark 😂
you didn't even show the part where you actually take the rotor off and put the new one on...Everything else was very detailed except the main thing the video was about WTF
Yes I did not show that specifically, at 1:52 I think I explained pretty good how it comes off, likely one phillips screw and in should slide off, plus link to another video for more help. Did you have problems with yours?
Use a impact screw driver. Once you remove the screw you will notice there is two thread sizes in the hole. Use one off the caliper bolts and screw in. This will push the rotor off. Spray the rotor with wd40 before you start doing anything
This! Lol this is what I was talking about!
The only link that is included is a link to your Facebook page.. unless I’m not seeing it
What size freakn socket do I need to take off the big AZZ nut under that dust cover in middle of rotor?????
Thigh bee rian