Project 0131 | Making a scrap wire stripping machine
HTML-код
- Опубликовано: 7 апр 2022
- The project numbered 0131 is a wire stripping machine using old cables for recycling purposes. It is well-known that pure copper that is included in the cables can be sold and having this in mind, we considered it wise to make a cable stripping machine.
Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/4swKdl and get a special starter pack 💥 Available only for the next 30 days!
► Get the plan: / makeitextreme
► Linktree: linktr.ee/makeitextreme
►All details about the video: bit.ly/3Kf93YR
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3N6JE54
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.com/shop/makeitext...
-----------------------------------------------------------------------------
Click here to Subscribe: bit.ly/MakeitExtreme
Second Channel: bit.ly/MakeitExtremeShorts
Facebook: bit.ly/Makeitextreme
Instagram: bit.ly/makeitextreme
TikTok: / makeitextremeshorts
Welding Machines:
Mig: bit.ly/Rallymig
Tig: bit.ly/PITIG
►Special Thanks to our new Patrons:
TOP (Jakob Keller)
Dawid, Carl Moses, Jay Hawker, Blake Paschal,
Robin Koning, kwstas zax, James Phillips Sr,
Panagiotis Kalyvidis, Leo Gothberg, Antonio Carbone,
Page A Bishop, Kelvin Hayman, Žiga Stepančič,
Andrzej Abramowicz, Ravi S Vishwakarma, Brian Ryder,
Ahmed Badr, Олександр Гавриленко, RubenGonzalez,
Andrew Miller, Ali Alzaabi
Music from Artlist: bit.ly/MIEArtlist
(Subscribe now and get an extra 2 months on your subscription) 
Наука
Install Raid for Free ✅ IOS/ANDROID/PC: clcr.me/4swKdl and get a special starter pack 💥 Available only for the next 30 days!
Been playing for two months now. Great game
Dear sir will you please make a iron nail header making machines video........ We want too se how do they do that..........
Here's a challenge for you , let's see if you can make a shredder from nothing but what you got in your workshop
I want to buy this machine wire stripper
How much price for it?
@@rupeshshah7232 , Nah he dosen't sell any of the things he makes cause he uses them later for other vids
7 years on, you are still my favorite channel on RUclips. A life building and creating is a life well lived!
It was my second video that I watched on yt
I agree, along with "AvE" and "This Old Tony". Cheers
É meu canal favorito também
Wow, mind totally blown by this one. The music was great, the change in mood from one tune to the other gives it a very cool rhythm to the whole thing.
The production on these videos is next level!
кайфовое технопорно ! но раньше изделия были круче ...но всё равно смотреть кайфово .
As we all know for now, you're a virtuoso in metalworking but anywho produces your videos give him/ her/ it whatever a raise. It was out of this world. Thanks for this satisfying content. Awesome work as always.
Insane editing and craftsmanship as always 😍
There’s a crazy amount of work in capturing all these video shots and then editing it all. Great result!
Incredible production quality on both the video and the project! You reminded me of why I wanted to be a machinist. Thank you! Just subscribed.
There really is little that's more satisfying to watch than pieces being made and put together which just fit so well into each other.
Those transitions bring this video on the highest level possible
Man, you are a genius. I really could have used this back when I was younger and my dad would recycle on the weekends. We had to strip wire by hand with a utility blade.
Вот что мне надо, супер станок!!💪👍👍
That's literally the wet dream of every cable thief in South Africa. You will make thousands if you sell machines like that over here. Awesome build. Awesome video and liked the background music.... . . can't wait for more content . . .
This officially makes you guys -- Stripers !!! Another awesome build ....
Mesmerising! machining sounds syncing with the music is a nice touch. So satisfying to watch!
You are a master maker of anything, my friend. I am mesmerized watching every one of your videos.
Thanks for sharing.
Felix
Сразу лайк не глядя. Спасибо. Коммент. Репост.
Top...Absolutely recommendable at the current copper prices.
Во заморочился!😂👍👍👍
I'm gonna try and make this with my drill press, angle grinder, and band saw!
You cant make a better engineering video than this. Everything I watched couldnt compete against this
I don't understand how you can be so precise,perfect!
You are truly a master at your craft.... looking forward to the next one!! 👍👍
Excellent job
Man I love you longer videos! I love watching you work! Thanks
Excellent work 👍
And I think I am gona do this
But I don't know how to work.
But I must do this for myself and starting a new business
Thank you for your helpful video
tweakers would love this thing
The dream of a non-ferrous metal collector!!!!!
Комментарий в поддержку канала и ролика, а также труда мастера.
It was as high quality and enjoyable as a movie.
Incredible 👏👏👏👏
By far you are the best lathe master I've ever seen 👌
Love from Pakistan
That was quiet an engineering project. Lots of careful measuring used to get all those peices to acheive fit and function. 😊
The best wire stripper that I have seen so far.
I’m want to buy this machine how much the price for it
Класс! До последнего думал, что же на этот раз сделал этот парень!
Красиво, надежно, мощно но зачем? Кому и для чего требуется снимать километры изоляции с проводов, или я тупой и не понимаю или это все просто для красивого видео. Кстати видео посмотрел прям с удовольствием.
полностью с вами согласен . исполнение просто супер а в остальном непонятно . видать совсем хреново , медь сдавать будет ...
Ну если есть доступ к обрезкам,почему бы и нет?)
просто если обжигать изоляцию, медь немного теряет в массе)) а это деньги
Now this is a demonstration in skill and ability
bearing from Poland, dziękuję dobranoc
Για άλλη μια φορά, μας αφήνεις εντυποσιασμενους, ΜΗΝ ΣΤΑΜΑΤΑΣ👍👍👍👍
Great design
Build a scissor lift with your special extreme abilities..!!
You have exceptional skills to be able to make all the stuff that you have been making fantastic
Awesome!!!! Great job!
If I could give you one little tip, it would be to put an emergency stop button near the both wire inputs.
The "two wire inputs"? The ones 6 inches away from each other?
Good Job, impressive.
Wow Excellent video.
우연한 만남이 이렇게…..
만나 뵈어서 영광이었어요.
유명하신 분이셨네요~~~
다음에 광장시장 혹은 현대백화점 판교점에 놀러 오세요
서비스 많이 드릴께요 ^^*
광장시장호랭이 드림
Love it. Next step: smelting it all down.
Finger cruncher 5000! Seriously though, very nice build. 👍
Great editing/video quality!
Beautifully built machine too. I was not expecting the level of precision you used when I clicked on the video.
Thank you very much!
Wow, work and music is an explosive mix! Wonderful
I watch your videos to gain knowledge thank you for continuing to post them🤗😎🤗😎
Great job, thank you brother. You are so talented
Excellent video. You have extreme talent not only as a machinist but also in producing interesting and creative videos.
I love your videos.
For some reason, the guide you made around the 22min mark I thought was going to be run the other way. Have it be the on the output and push the sheathing on the outside and when you force it out it would pull the two parts apart. I assume it would just be a potential spot for the machine to jam though.
As usual, totally awesome build MIE! 👍👍👏👏💥💥
Semi-automated wire stripper/copper extractor very good sir. You'll make quite some money by selling pure copper from disposed wires but the problem is that the process is very labour intensive. Well, your machine makes things easy👍
As usual nothing but bad ass work done by you 👍👊
Hola genial ..me encantan tus trabajos .y sin hacer alardeos ..deberias de estar en la nasa ..
Quality production and work! Awesome
awesome video, great filmed and edited and a great result great respect 👍
wow this so amazing, you are a complete man.
I was writing a comment in the cable length measuring tool that he could make a cable stripper and "voilà" here it is, very nice machine and video editting 🙂
Projeto top
Wow great projekt, good job! I also love the Editing work on this one 💎🎉
Nice work as always. We shared this video in our homemade tools forum this week 😎
As always, top-notch project and video.
Cara vcs são demais parabéns pelos vídeos 👏🏽👏🏽👏🏽👏🏽👏🏽👍🏼👍🏼👍🏼👍🏼
Loved every minute of it.
From Vietnam
Man I need a six jaw chuck. Also, your camera work and editing is *tight*.
Excellent job really awesome 👏
true artist and machinist
That is awesome. I'd give my right arm for something like this.
Time to cast some copper. Nice machine.
I could use one of these soon as I am retiring and all that wire in the shed needs processing.
Simply great! - Greetings from Dresden!
Awesome idea amazing job my friend congratulations
Not to nitpick but one of your nameplates on the machine has a typo! Super cool build as always.
So much detailed work
Menjadikan saya tertarik untuk membuat. 👍
Awesome as always. 👍👍👍
Wonderful project!
top video top music
Awesome job Master!!
👌💪👍👋🇲🇽
The video is really well done and the tracking shots aren't bad either
ok i don't know what to do
Beautiful! 👍
So good
Great performance!
احسنت الصنع عمل رائع🙂
Salam dari BALI..
Excellent job.
Superb concept and delivery is something that a lot of people would definitely want.
Was the misspelling of extreme on the upper plate, deliberate? Make It Exreme 0131
Awesome work! Good job!
Im couple years fan of u, ur one of my favorite channel ever, can u make a engine out of scraps, so no buying parts or so but make every part by ur self? Im wondering
Great job.
if you can bend the output at close to a ninety, the wire will seperate from the shielding.
a friend built one for stripping miles of poleline wire.
Next build water granulation table and granulation mill for wire scrap
WOW that was alot of work good job and i want one :)
good job mister well done
As always, great idea and execution. For this ecological. I am looking for an idea for a crumple for domestic plastic and aluminum waste ...