This did work on my 2006 Sienna, but it took several tries to get the programming mode on. I think it worked finally because, as shown in this video, I only opened the door enough to let the door ding only once each time I opened it. And I opened and closed it fairly quickly, as shown in this video. Bravo! Great instructions!! Many thanks!!
To get into programming mode you must do the first two steps in 35 seconds. Then take the key out within 10 before sticking in new key and waiting for light out.
Worked perfectly the first time on my 2005 Toyota Matrix! $12 bucks total for new key off Amazon and local hardware store to cut the key. I would definitely try this first before spending $80 at the dealer! Thanks, DIY-time!
Thank you! I bought an after-market key on eBay but the instructions were as clear as muddy water. My car is a Toyota Corolla Ascent sedan 2007 ZRE-152 (Australia). I didn't find your website describing the procedure. Your warning not to cut the key first is important but in my case, I cut it first - I was able to succeed with your procedure luckily. Your second good point is how to identify the master key and use it for programming. Your best point was how to know that you have brought the car into key programming mode - the security light staying on once the master key was withdrawn. I'm so grateful to have found your crystal clear procedure - I spend a day opening and closing my door trying the eBay procedure and others I found online. Luckily I found your excellent method - worked the first time! I'm impressed 🙂
Thanks! This worked like a charm on my 2006 Toyota Highlander Hybrid - I bought a transponder key online for $6, took it to my local Walmart, and they cut the new key for free! Total WIN!!!
2005 Matrix , $16 blank on EBay , $4 to cut key , Programming key for free with these instructions . Success . Instructions worked great . Lock smiths want $65-75 for this same job . Thanks for a clear instructional video .
I used your procedure successfully on a 2005 Sienna XLE Limited. I got the key blank on Amazon from Keys2go for 7.99 plus tax. It had the dot on the key stem. Home Depot cut the key for free. They used a big Hillman automated key making machine. They must have their own key blank to provide a bar code to program the key making machine. There are procedures on RUclips to program the key fob as well. Thanks for providing an excellent video! I have only used this key twice so I can’t comment on its longevity.
My 2005 Toyota Corolla(without automatic locks) key is bending really bad so I bought 2 keys with chips in the online for $14 and I got them cut at farm and fleet for free and I followed these steps and it worked perfectly. I just saved like $90 per key. Dealerships charge so much for replacements. Thank you for this video!
Worked great in a 2007 Highlander, thanks for the clear instructions. Locksmith didn't believe me when he cut the blank that it was possible to program the key transponder without a specific programming device
Ha ha.. 😂 I just had the same experience.. Key lock place said they would have to program each key for $45.. I told them that I could do it myself.. they didn't believe me and wished me luck.. and said, "Come back when it doesn't work "
2005 Toyota Matrix. Worked!!!!! Thank you. Ordered blank oem key online for 12$ for two keys took it to homedepot they cut it for free because they told me they couldn't program it unless I bought their 80$ key.
+dave s Awesome! Once I also got my 4Runner keys cut for free at my local hardware store. Because I brought my own keys, they didn't charge me anything.
For my 2004 sequoia this definitely worked .. Update. I tried one more time and it worked using the sequence below. This time, when turning the programmed key back and forth to off and on, I did it really fast. I also inserted the new key really fast. I think that’s what did the trick. You have to do it really fast with Sequoia. That’s what my locksmith told me. He was right. 1) Close all doors 2) Insert your Master key (black) int the key cylinder 3) Turn the ignition from Lock to On 5 times within 15 seconds - on the 5th time, leave the key in the ON position 4) Open and close the driver’s door 6 times within 20 seconds 5) Turn the Master key back to Lock and remove 6) Insert the new blank key and turn to ON position 7) Leave in ON position for at least 60 seconds (while the key registers with the vehicle) 8) After 60+ seconds, remove the key. 9) Open then Close the driver’s door to end the process”
Alhamdulillah! About the 10th time I tried it it worked! 💕💕💕 This single mom thanks you a million. Never use paracord as a key chain! Mine got wrapped around my steering column and bent my key this morning almost in a 90° angle. Yikes!!! Needless to say my original intention was to go on Amazon months ago and get spare keys and program them myself. But because of the possible emergency situation not wanting my key to break off in my ignition. I went to the dealership today verified my ownership them, bought the key only and have them cut it by the VIN number (because that bent key definitely was not fitting into a tracer key machine to copy it) and told him I'd be back if I couldn't program it myself. Getting the key today costing me $45 but I saved $155 "programming fee" plus most importantly I saved hours of time wasted on a Saturday day off not having to wait, in a dealership . Now I will be getting the rest of my spare keys on Amazon as well as getting the key fob which itself at the dealership cost over $130 plus the programming fee. Again a million thanks.
To get into programming mode you must do the first two steps in 35 seconds. Then take the key out within 10 before sticking in new key and waiting for light out.
Video workes perfectly, watched all other videos and tried other instructions buy they all say to turn thr new key to on position, that doesnt work for sienna 09
Worked on my 2004 Highlander. Bought a combo key from Bay and had it cut by a local HW store. The person helping me said there was no charge but I gave him a nice tip. Even though everything worked out for me your advice to program the key BEFORE cutting makes lots of sense. Programming didn't work on the first attempt and I got a little concerned. Let me know you read this and I'll send a tip your way as well!!$
This procedure works on Toyota Camry 2006 LE 4 Cylinder. It did not work for me after three tries, because I opened and closed the door too slow. I read one of the previous comments about open and close the car door just like on this video, and tried again, it works. You need to open and close the driver door a little fast, just like the video.
Make sure you are using master key to enter programming mode. Make sure you have correct chip as well (same as on your master key). Or your new key may be defective.
@@DIYtimeTRD or you car has reached the maximum amount of keys to program and you have to have to hack into the cars ECU to remove lost programmed keys
Thank you for sharing! I'll add it to compatibility list on my web site, this definitely will be helpful for others! www.diy-time.com/automotive/toyota/toyota-transponder-chip-key-programming/
Thank you so much, this video saved me $240 , I bought a key from Toyota blank one $32, which they were going to charge me $299 to cut and programme it. but I got it cut for $15 and programmed it myself. Total cost was $47. Make sure you follow the steps, also go on their website read the steps before you do it, test out if you can start the programming mode with your key first before you go to buy the key. it worked for my 2005 toyota Kluger Japanese import. (YOU HAVE TO HAVE THE WORKING KEY TO MAKE THIS WORK.)
Hi! I have a problem with my 2005 camry. When I push the unlock key it unlock the door, get 2 beeps and a flashing light. But, when I push the lock button I don't get anything except the doors get locked , no beep no flashing light and the headlight don't go off even after I hit it twice. Can someone help me fix this issue i'd appreciate it.
Worked easily on my 2004 Camry XLE, even thou the locksmith who cut my new key said "You- tube' would not work" AND the fine print from ebay seller, said key was NOT 'self' programmable- It's a ''chip type 4D67'' Many THANKS
Thank you it worked for 2006 Toyota hybrid limited highlander..... husband 1.order key online 2.then got the 🔑 cut by local locksmith 3. program the 🔑following this instruction 4.happy saving 💰....
Thanks so much for this video! Worked on a key I had cut for my 2005 Toyota 4Runner. Very clear instructions and worked on the first try. Saved myself $125 they charge at the dealership! Thanks again!
2006 Toyota Sequoia I didn't follow this video. But there is a link for additional information on the website. It included instructions for 2003-2007 toyota Sequoia. I followed method 2, but also the additional note(by jonathan eliff) after that is important the sequoia is closed and locked, use fob to unlock while in vehicle. security light will remain off when in programming mode. Took 3 tries to enter programming mode, but the $13(+$2 to get it cut at local lock smith) oem key i bought on ebay worked perfect! Thanks so much for your information
Fantastic and thanks do much for this! My locksmith wanted to charge be $120 AUD to supply and program a key. Thanks to you I will have money left over for Xmas presents this year.
Thank you for making this video! It helps most of us not get ripped off by the locksmiths and Dealership's! Remember also that when you buy a use car from Dealership make Shure to tell them to give you a set of keys not just one set! They can make it for you right on the spot!! They let them BS you that they only can give you one set!! They just want you to return to them so that you paid them about $500.00 for the other key! Don't be a sucker!
This worked perfectly on my 2004 toyota highlander on the first try. Thanks! Saved me $75. from dealer program. The key cost me $24. for the chipped key with cutting. I would have had to make an appointment and go back for programming. Another video did not work for me that involved pressing the brake and gas pedal without opening the door. This one did the trick!
Just programmed my key by this method. Worked perfectly on my 2006 Toyota 4runner. Guy at Ace hardware cut key for $2 but said I wouldn't be able to program it myself. There was a big sign in store that said they charged $69 to cut and program transponder keys. Its BS folks. He asked how I was going to do it. I said I had to pat my head and rub my tummy, and open my door six times. Like on You tube. He warned me that You Tube isn't always reliable. I grinned and thanked him.
😂 I had almost the same story... Guy at Ace Hardware told me key will only start the car once so you could drive to the dealer to get new key programmed. He also said after first use ignition cylinder may get locked and only dealer can unlock it. He almost got me... I was close to paying him for programming, but then decided to risk it. Just to be safe, I programmed key at dealers parking lot... Than started car few time to see if it gets locked or not... Worked like a charm! Saved me $200!
Thank you, This was a big help ! I have a 03 4Runner v8 4.7 chip is bottom right side OEM key at toyota is $ 37.00 programming is $ 170.00 I'll just have the key cut and do the rest my self ! Thanks
Tried this today on two 4D chip w/ "DOT" transponder keys purchased on Amazon $20. Your procedure worked perfectly on both keys for my 2008 FJ Cruiser.
Worked great for my 2004 Sienna LE. Excellent clear instructions especially from a Russian guy (no offense) ;) Now I will buy more keys from your link as a token of my appreciation.
Awesome work, Sir! Thank you very much! I am NOT going to pay someone $150 to 'program' my key! I knew there had to be an easier way! I'll bet you have you don't have to open and close the whole door though. I will try it with just pushing the little button the door pushes when it closes and let you know if it works. Just easier to not have to open and close the whole door. Thanks again! Merry Christmas!
Yay, 2005 corolla works great. Took two tries because the first time I waited a bit too long to insert the new key. Be sure to get the new key in while the security light is still lit solid.
+kahanaohana Sorry, our 4Runner was totaled in car accident, so I never recorded that video. But I should still have programming instructions somewhere. I'll send it to you soon.
+kahanaohana Here you go. Doesn't look like it is compatible with 2009 4Runner, but try it anyway. Don't buy a remote yet, just check if you can enter programming mode first. www.diy-time.com/automotive/toyota/toyota-remote-fob-programming-instructions/ I hope this works.
DIY-time hi, I intend to buy a Toyota Vitz 2013 which has only one key...will the steps you showed work for my Toyota Vitz F , 1000 cc, right hand drive?
Worked like a charm on my 08 Sr5. My only regret is the dealer didn't have one and I went with an aftermarket key that works great but, doesn't have a Toyota logo on it.🤣
2002 Sequoia Have your master Toyota key at hand (black key) 1. Insert black programmed key into ignition. 2. Press and release accelerator pedal 5 times within 15 seconds of inserting key into ignition. 3. Press and release brake pedal 6 times within 20 seconds of step 2. 4. Remove black key from ignition switch. 5. Insert new unprogrammed key into ignition within 10 seconds of step 4. 6. Press and release accelerator pedal once within 10 seconds of step 5. 7. Once these steps are performed properly you will see the immobilizer warning lamp begin to flash and after one minute the lamp will stop flashing. Once the immobilizer warning lamp stops flashing you will have ten seconds to insert an additional key to be programmed. 8. Within ten seconds of inserting key into ignition press and release accelerator pedal once. 9. Immobilizer warning lamp will flash and after one minute the lamp will shut off.
Worked on 2005 Corolla. One point I think not mentioned in video is you need to complete the programming sequence within 35 seconds. Found that out on another video after multiple failed attempts
You can find blank Toyota transponder chip key here: amzn.to/3e3fbCM
(this is an Amazon affiliate link)
This did work on my 2006 Sienna, but it took several tries to get the programming mode on. I think it worked finally because, as shown in this video, I only opened the door enough to let the door ding only once each time I opened it. And I opened and closed it fairly quickly, as shown in this video. Bravo! Great instructions!! Many thanks!!
Well it won't work for us on our 2009 RAV4.
Me neither in my 2010 Corolla.
To get into programming mode you must do the first two steps in 35 seconds. Then take the key out within 10 before sticking in new key and waiting for light out.
Worked perfectly the first time on my 2005 Toyota Matrix! $12 bucks total for new key off Amazon and local hardware store to cut the key. I would definitely try this first before spending $80 at the dealer! Thanks, DIY-time!
Awesome!
Thank you! I bought an after-market key on eBay but the instructions were as clear as muddy water. My car is a Toyota Corolla Ascent sedan 2007 ZRE-152 (Australia). I didn't find your website describing the procedure. Your warning not to cut the key first is important but in my case, I cut it first - I was able to succeed with your procedure luckily. Your second good point is how to identify the master key and use it for programming. Your best point was how to know that you have brought the car into key programming mode - the security light staying on once the master key was withdrawn. I'm so grateful to have found your crystal clear procedure - I spend a day opening and closing my door trying the eBay procedure and others I found online. Luckily I found your excellent method - worked the first time! I'm impressed 🙂
Thanks! This worked like a charm on my 2006 Toyota Highlander Hybrid - I bought a transponder key online for $6, took it to my local Walmart, and they cut the new key for free! Total WIN!!!
I wasn't aware that Walmart had the VIN codes for the keys ! That sounds scary !
2005 Matrix , $16 blank on EBay , $4 to cut key , Programming key for free with these instructions . Success . Instructions worked great . Lock smiths want $65-75 for this same job . Thanks for a clear instructional video .
Great! Thank you for sharing!
James Thompson work whit scion
o5... I'll try again!!! i couldn't do the key........... matrix. I did the remotes!!!
I tried a couple of other procedures that did not work on my 2004 Highlander. This procedure worked like a charm.
I used your procedure successfully on a 2005 Sienna XLE Limited. I got the key blank on Amazon from Keys2go for 7.99 plus tax. It had the dot on the key stem. Home Depot cut the key for free. They used a big Hillman automated key making machine. They must have their own key blank to provide a bar code to program the key making machine. There are procedures on RUclips to program the key fob as well. Thanks for providing an excellent video! I have only used this key twice so I can’t comment on its longevity.
Awesome, thank you for coming back to share your success story!
My 2005 Toyota Corolla(without automatic locks) key is bending really bad so I bought 2 keys with chips in the online for $14 and I got them cut at farm and fleet for free and I followed these steps and it worked perfectly. I just saved like $90 per key. Dealerships charge so much for replacements. Thank you for this video!
Awesome, I’m glad it worked out so well for you!
You sir are brilliant! I mean it. You just saved me 600 dollars for one spare key to my vehicle. Thank you.
That’s awesome! Thank you!
And I thought the 100 bucks they wanted for mine was high.
Outstanding job! It took me 4 attempts but I finally got it into program mode. I have a 2008 Toyota 4runner.
Worked great in a 2007 Highlander, thanks for the clear instructions. Locksmith didn't believe me when he cut the blank that it was possible to program the key transponder without a specific programming device
Ha ha.. 😂 I just had the same experience.. Key lock place said they would have to program each key for $45.. I told them that I could do it myself.. they didn't believe me and wished me luck.. and said, "Come back when it doesn't work "
2005 Toyota Matrix. Worked!!!!! Thank you. Ordered blank oem key online for 12$ for two keys took it to homedepot they cut it for free because they told me they couldn't program it unless I bought their 80$ key.
+dave s
Awesome! Once I also got my 4Runner keys cut for free at my local hardware store. Because I brought my own keys, they didn't charge me anything.
For my 2004 sequoia this definitely worked
..
Update. I tried one more time and it worked using the sequence below. This time, when turning the programmed key back and forth to off and on, I did it really fast. I also inserted the new key really fast. I think that’s what did the trick. You have to do it really fast with Sequoia. That’s what my locksmith told me. He was right.
1) Close all doors
2) Insert your Master key (black) int the key cylinder
3) Turn the ignition from Lock to On 5 times within 15 seconds - on the 5th time, leave the key in the ON position
4) Open and close the driver’s door 6 times within 20 seconds
5) Turn the Master key back to Lock and remove
6) Insert the new blank key and turn to ON position
7) Leave in ON position for at least 60 seconds (while the key registers with the vehicle)
8) After 60+ seconds, remove the key.
9) Open then Close the driver’s door to end the process”
Awesome, thank you for sharing you findings here! 👍🏻
Thank you, this worked on my '04 Sequoia
THANKS men, you are awesome, worcks great in my 03 sequoia
Alhamdulillah! About the 10th time I tried it it worked! 💕💕💕 This single mom thanks you a million. Never use paracord as a key chain! Mine got wrapped around my steering column and bent my key this morning almost in a 90° angle. Yikes!!! Needless to say my original intention was to go on Amazon months ago and get spare keys and program them myself. But because of the possible emergency situation not wanting my key to break off in my ignition. I went to the dealership today verified my ownership them, bought the key only and have them cut it by the VIN number (because that bent key definitely was not fitting into a tracer key machine to copy it) and told him I'd be back if I couldn't program it myself. Getting the key today costing me $45 but I saved $155 "programming fee" plus most importantly I saved hours of time wasted on a Saturday day off not having to wait, in a dealership . Now I will be getting the rest of my spare keys on Amazon as well as getting the key fob which itself at the dealership cost over $130 plus the programming fee. Again a million thanks.
Awesome, now make the second spare key and remote for the situations like this!
2003 4runner limited V6. Key from dealer = $28 (including cutting the key from VIN). Programming instructions worked perfectly.
Nice!
To get into programming mode you must do the first two steps in 35 seconds. Then take the key out within 10 before sticking in new key and waiting for light out.
Video workes perfectly, watched all other videos and tried other instructions buy they all say to turn thr new key to on position, that doesnt work for sienna 09
Worked on my 2004 Highlander. Bought a combo key from Bay and had it cut by a local HW store. The person helping me said there was no charge but I gave him a nice tip.
Even though everything worked out for me your advice to program the key BEFORE cutting makes lots of sense. Programming didn't work on the first attempt and I got a little concerned.
Let me know you read this and I'll send a tip your way as well!!$
Thanks for sharing!
I’m glad it helped!
@@DIYtimeTRD Programmed the remote today. Both remote and transponder work now!
Perfect! It is so easy, I used to make 3-4 copies for my Toyota, one fir wife, one for stay home, one for hidden magnetic box in case of emergency…
I have a 2007 Camry Solara. I tried 4 different posts on how to program, but none worked!. yours did. I can not thank you enough
I have the same car it didn't work, how did you do it
It worked!!! Thank you DIY for providing valuable tip, priceless!!
worked perfect on my 2004 camry le, thanks a million.....from cincinnati
Awesome!
Thanks!
Worked perfectly on 2004 Toyota Camry SE V6. Saved me a bundle. Dealership wanted $130 just to program! Thanks a lot.
Awesome, Im glad it worked out well for you!
2006 Toyota Highlander Limited 2 wheel drive- worked perfectly! Fantastic tutorial!
Thanks!
Joe
I really appreciate your insight. Looks like I'll be driving again soon. Thank you very much.
Did not work for my 2007!Toyota Camry any advice?
TFin even mine not working 2017 Toyota Camry solara. Any update?
This procedure works on Toyota Camry 2006 LE 4 Cylinder.
It did not work for me after three tries, because I opened and closed the door too slow. I read one of the previous comments about open and close the car door just like on this video, and tried again, it works. You need to open and close the driver door a little fast, just like the video.
Thanks for the tip!
Just did this on my 2007 4Runner SR5..... worked perfectly first time ! Paid $7.95 for the transponder blank on Amazon, $2 to have the key cut.
Sounds like a good deal!
I tried this and everything worked as described until I puI t the new key in. The light is blinking much faster than your light. Advice?
Make sure you are using master key to enter programming mode.
Make sure you have correct chip as well (same as on your master key).
Or your new key may be defective.
@@DIYtimeTRD or you car has reached the maximum amount of keys to program and you have to have to hack into the cars ECU to remove lost programmed keys
@@DIYtimeTRD please show same videos for Hyundai i20.
I dont have that car available to me...
HI, do you know if this method works for a G chip of a 2010 Toyota Hilux?
Sorry, I don't know. We don't have Toyota Hilux here in US.
This worked for my Toyota 2010 HILUX, Spent only $4 for key and chip, Socksmiths asked over $100. Thank you
Thank you for sharing!
I'll add it to compatibility list on my web site, this definitely will be helpful for others!
www.diy-time.com/automotive/toyota/toyota-transponder-chip-key-programming/
Thank you so much, this video saved me $240 , I bought a key from Toyota blank one $32, which they were going to charge me $299 to cut and programme it. but I got it cut for $15 and programmed it myself. Total cost was $47. Make sure you follow the steps, also go on their website read the steps before you do it, test out if you can start the programming mode with your key first before you go to buy the key. it worked for my 2005 toyota Kluger Japanese import. (YOU HAVE TO HAVE THE WORKING KEY TO MAKE THIS WORK.)
Awesome, thank you for sharing!
Hi!
I have a problem with my 2005 camry. When I push the unlock key it unlock the door, get 2 beeps and a flashing light. But, when I push the lock button I don't get anything except the doors get locked , no beep no flashing light and the headlight don't go off even after I hit it twice. Can someone help me fix this issue i'd appreciate it.
i need your help for Toyota FJ CRUISER 2010 Keyless Entry Remote Replacement programming
didn't work for me either.
Worked easily on my 2004 Camry XLE, even thou the locksmith who cut my new key said "You- tube' would not work" AND the fine print from ebay seller, said key was NOT 'self' programmable- It's a ''chip type 4D67'' Many THANKS
😂 Of course it “wouldn’t work”... Cuz Locksmith cannot charge you an arm and a leg for it...
Thank you it worked for 2006 Toyota hybrid limited highlander..... husband
1.order key online 2.then got the 🔑 cut by local locksmith
3. program the 🔑following this instruction
4.happy saving 💰....
Does NOT work for 2007 Corolla or 2007 Camry
For the 2007 Toyota Camry, I was told, leave the key inserted on the 6th time and open and shut the door 6 times. 👀
Nice video does anyone know if this works on the 2007 corolla the key I have looks the same. Thank you
No, it won't work on 2007 model.
www.diy-time.com/automotive/toyota/toyota-transponder-chip-key-programming/
what about a 2006 model. its also a corolla
MartiSide did it work I bought the key but haven’t got it cut or tried yet
I found you need to do the steps quickly, otherwise it didn't work. Thanks for the video!
You are welcome, thank you for sharing!
Thanks so much for this video! Worked on a key I had cut for my 2005 Toyota 4Runner. Very clear instructions and worked on the first try. Saved myself $125 they charge at the dealership! Thanks again!
2006 Toyota Sequoia
I didn't follow this video. But there is a link for additional information on the website. It included instructions for 2003-2007 toyota Sequoia. I followed method 2, but also the additional note(by jonathan eliff) after that is important the sequoia is closed and locked, use fob to unlock while in vehicle. security light will remain off when in programming mode.
Took 3 tries to enter programming mode, but the $13(+$2 to get it cut at local lock smith) oem key i bought on ebay worked perfect!
Thanks so much for your information
Awesome, thank you for sharing!
Fantastic and thanks do much for this! My locksmith wanted to charge be $120 AUD to supply and program a key. Thanks to you I will have money left over for Xmas presents this year.
Worked on my 2006 Sienna XLE. Took less than five minutes. Local Toyota Dealers wanted to charge from $60 (and take 2.5 hours to do it) to $120.
Thank you for sharing! 👍 I always wanted to know how much dealer is charging for it...
DIY just saved me $130 from going to the stealership. Works awesome. just did my 2008 Toyota 4runner. thanks sir !
+cpdoh
Great, I'm glad to hear that!
Thank you for making this video! It helps most of us not get ripped off by the locksmiths and Dealership's! Remember also that when you buy a use car from Dealership make Shure to tell them to give you a set of keys not just one set! They can make it for you right on the spot!! They let them BS you that they only can give you one set!! They just want you to return to them so that you paid them about $500.00 for the other key! Don't be a sucker!
Hey I was in your website and used method #2 and it worked on my 03 Sequoia. I left the key on for 1:05(so more than 60 secs).
Great, glad it worked!
Worked on 2006 convertable solara. Took longer then a minute but it worked.
This worked perfectly on my 2004 toyota highlander on the first try. Thanks! Saved me $75. from dealer program. The key cost me $24. for the chipped key with cutting. I would have had to make an appointment and go back for programming. Another video did not work for me that involved pressing the brake and gas pedal without opening the door. This one did the trick!
Thats great, thanks for sharing!
Just programmed my key by this method. Worked perfectly on my 2006 Toyota 4runner. Guy at Ace hardware cut key for $2 but said I wouldn't be able to program it myself. There was a big sign in store that said they charged $69 to cut and program transponder keys. Its BS folks. He asked how I was going to do it. I said I had to pat my head and rub my tummy, and open my door six times. Like on You tube. He warned me that You Tube isn't always reliable. I grinned and thanked him.
😂
I had almost the same story... Guy at Ace Hardware told me key will only start the car once so you could drive to the dealer to get new key programmed. He also said after first use ignition cylinder may get locked and only dealer can unlock it. He almost got me... I was close to paying him for programming, but then decided to risk it. Just to be safe, I programmed key at dealers parking lot... Than started car few time to see if it gets locked or not... Worked like a charm! Saved me $200!
This procedure worked for my 2008 scion tc, thank you so much!!!!
Thank you, This was a big help ! I have a 03 4Runner v8 4.7 chip is bottom right side OEM key at toyota is $ 37.00 programming is $ 170.00 I'll just have the key cut and do the rest my self ! Thanks
Awesome!
Tried this today on two 4D chip w/ "DOT" transponder keys purchased on Amazon $20. Your procedure worked perfectly on both keys for my 2008 FJ Cruiser.
Awesome!
This worked for 2008 Rav4! I'm not sure this base model has a security light, but it still worked waiting 60 seconds.
Thank you for sharing!
I subscribed because of your help programing the 2005 toyota corolla xrs key earlier
Thank you so much, I greatly appreciate it!
Where to get the key for corolla?
In regards to Sequoia 2nd method worked as easy as described
Excellent!
Thank you this really worked i just programed a 2005 toyota corolla xrs and the key.is now fully programed and works beautifully thank you
Awesome!
Worked perfectly for my 2005 Sienna
Worked great for my 2004 Sienna LE. Excellent clear instructions especially from a Russian guy (no offense) ;)
Now I will buy more keys from your link as a token of my appreciation.
😁 Awesome, thanks!
worked for my 2004 4 runner SR5, saved me $200 thanks.
Awesome work, Sir! Thank you very much! I am NOT going to pay someone $150 to 'program' my key! I knew there had to be an easier way!
I'll bet you have you don't have to open and close the whole door though. I will try it with just pushing the little button the door pushes when it closes and let you know if it works. Just easier to not have to open and close the whole door.
Thanks again! Merry Christmas!
Thanks, you too! 🎁 🎄
Come on rick ,share the results man. Tips? Lol suspense sucks
Why are you so so so f__king lazy let the flies out of your car.
Worked smoothly on my 07 Toyota 4Runner
👍🏻
Yay, 2005 corolla works great. Took two tries because the first time I waited a bit too long to insert the new key. Be sure to get the new key in while the security light is still lit solid.
I can't even get the security light to light solid.
@@njsongwritersame on my highlander 2007😢
2007 Sienna : worked like a charm! Thank you!
Worked perfectly for 2 keys for my F.J. Cruiser, you are awesome.
Thank you! 😁
I have a Toyota Camry Solara 2008 period it worked great thanks
unbelievable it worked! thanks. 2009 4runner. now the remote, I dont see your video for that. thanks again.
+kahanaohana
Sorry, our 4Runner was totaled in car accident, so I never recorded that video. But I should still have programming instructions somewhere. I'll send it to you soon.
+kahanaohana
Here you go. Doesn't look like it is compatible with 2009 4Runner, but try it anyway. Don't buy a remote yet, just check if you can enter programming mode first.
www.diy-time.com/automotive/toyota/toyota-remote-fob-programming-instructions/
I hope this works.
thx, will check
Worked first try on two new keys for 2008 4Runner, thank you!
worked perfect, had to do it twice and wait a little more than a minute, but still it worked. thanks
DIY-time hi, I intend to buy a Toyota Vitz 2013 which has only one key...will the steps you showed work for my Toyota Vitz F , 1000 cc, right hand drive?
Most likely not.
DIY-time any idea how to do duplicate key for my Vitz pal?
Sorry, no idea. We don't have this model here in US.
EXCELLENT!! 2003 4RUNNER SPORT LIMITED
It worked on 2008 FJ Cruiser. Thank you for your video!
Thanks man you just saved me $135.
My pleasure!
Worked like a charm on my 08 Sr5. My only regret is the dealer didn't have one and I went with an aftermarket key that works great but, doesn't have a Toyota logo on it.🤣
It worked the first time on my 2008 Toyota 4runner. Thank you!
Worked great for an 03 sequoia my wife and I just bought.
Great, thanks for sharing!
Worked fine on my '05 4Runner!
Worked on 2004 Highlander after getting into programming mode in 30 seconds. Thanks.
Awesome!
It works with my 2008 Sienna. Awesome tutorial!
Thank you!
This worked on my 2008 Scion TC. Thanks for saving me $60!
Great! i'll add it to the list in description.
Thank you for coming back and sharing it!
2005 sienna worked thanks. Other vids didnt work
Thats great!
Brilliant is right, thanks so much, you just saved me $50
Thank you for sharing how program new
Glad it helped!
Worked on a Toyota Yaris 2008! Great video mate! Thanks
Thanks man, worked on my 2009 4Runner the first time I tried. Saved quite a bit of dough.
Awesome!
Thanks, I’ll try it! 2005 Toyota Tacoma 6 cyl base. 4 door.
works on a corolla xrs 2005! thank you! 45 $ for the oem key and cut!
Awesome! You just saved me $75.
Awesome!
Worked the first try on my 2007 4Runner!
2002 Sequoia
Have your master Toyota key at hand (black key)
1. Insert black programmed key into ignition.
2. Press and release accelerator pedal 5 times within 15 seconds of inserting key into ignition.
3. Press and release brake pedal 6 times within 20 seconds of step 2.
4. Remove black key from ignition switch.
5. Insert new unprogrammed key into ignition within 10 seconds of step 4.
6. Press and release accelerator pedal once within 10 seconds of step 5.
7. Once these steps are performed properly you will see the immobilizer warning lamp begin to flash and after one
minute the lamp will stop flashing. Once the immobilizer warning lamp stops flashing you will have ten seconds to insert an additional key to be programmed.
8. Within ten seconds of inserting key into ignition press and release accelerator pedal once.
9. Immobilizer warning lamp will flash and after one minute the lamp will shut off.
Thanks for sharing!
Hi, worked on 2009 Toyota Sienna , Thanks!
Works perfectly on my 07 solara as instructed 🎉
Thank you for this! It worked perfectly on my 2004 Lexus. Saved me so much money.
Works on my 2004 Corolla Fielder S. Thanks
Worked great on a 08 solera. Thanks for the video!
Works on 2010 Sienna. Thank you.
Worked great on my 2005 Toyota Sienna! Thanks a ton!
My pleasure!
Worked on my 2002 landcruiser 100 series ! Thanks heaps :)
Nice!
Thanks! Worked the first time on my 2004 4Runner
Awesome!
Thanks I'm grateful
Awesome! Grateful people are the best!
@@DIYtimeTRD Thanks
For your knowledge, YOU are awesome
Keep it up and coming.
Thanks! 😁
Worked on 2005 Corolla. One point I think not mentioned in video is you need to complete the programming sequence within 35 seconds. Found that out on another video after multiple failed attempts
Yes, you need to start next step immediately one after another.
Worked on 2005 toyota sienna. TY
Nice!