Excellent tutorial ! For the only one reason this program from Canon is worse than OSB is that the life stream is not recorded neither on camera SD card or anywhere else on PC.
Hmm that is weird. It should work. It's bit difficult to tell without looking. But once u create a schedule in live stream section, and connect your camera to your account it should detect.
Sir, can you please clarify, do I have the option to give AC power to the M50 Cannon Mark 2 camera so that I can LIVE stream for 2 hrs+ in youtube. Secondly, If I'm using the OBS software and or streamyard software to stream to youtube/FB how do I go about setting up the camera for livestream..can you please give us a separate vdo or give me info on this here. Awaiting your response
hello! writting from Argentina, sorry for my english. I do it all, but not showme the icon live streaming in the camera. You knowwht happened? Thankyou!!
am not getting live streaming icon on my canon M50. I think the M50 does not support but it was added to the site I register from. I only see Upload to Web Service. Is there any other way please
@@keithjohnson1109 not from the HDMI, Through the USB cable and Webcam Utility App, you can connect the camera to the computer like a webcam and do the live stream that way.
@@R2StudioMasterclass What if l have 100 scheduled live streams from before, so at the moment l can only see a short least on the camera, l cannot see the new one which l have created. Any suggestions on the way around that?
@@R2StudioMasterclass but while streaming with m 50, the video is buffering (it gets stuck or stops, not getting continuous streaming) when the signal strength is low.
Is there an alternative for the battery issue? I had read in some forum that there was way to charge via cable connected to pc with an alternative battery. is it possible?
if you using the stream function then the camera is getting the power from the USB C cable it self, or else you can buy a dummy battery with a power cable where you can use that with a wall socket
Is it possible to save the livestream on RUclips after ending the recording since it can't be saved on the memory card on the camera? And is it possible to do it the same way for livestream from Facebook? 😊
I am not able to livestream on youtube after connecting my Y account to the canon website, can you help please? I did all the steps but I am not able to live stream.
when I connect to the live stream on the camera it says "could not start [live streaming] mode. Check the streaming service settings" what am I doing wrong?
Is anybody else running into Err126? I'm able to get through all this setup, select live stream from the camera, choose the name of the livestream, and then when I press the record button to start streaming, it says "Err126: Could not connect to server".
![Digital Circus Episode 4 [TRAILER]](http://i.ytimg.com/vi/abZtsmMUbJo/mqdefault.jpg)
It worked ! I followed your instructions thanks 🙏🏽
Finally a video that makes sense thank you been looking everywhere 👌
Excellent video! You explained exactly my questions clearly.
Glad it was helpful!
Excellent tutorial ! For the only one reason this program from Canon is worse than OSB is that the life stream is not recorded neither on camera SD card or anywhere else on PC.
Digatama English vid ekai sinhala vid ekai dammanam forign audience ekakuth innavanam degollotama therenavane. Superb😉😉😃💕
OMG!
There are A LOT of steps to make this happen. They made it sound like this would be easy.
exactly, its call marketing 😅
Very helpful. Thank you.
ලංකාවෙ youtubers ල ඔක්කොම එයාගෙ video එකට තවත් international video එකක් හදනව නම් international level එකට අභියෝග කරන්න පුළුවන්
Great tutorial. I have not heard of this option for streaming anywhere else. Thank you!
Your welcome..
I have above 1k subscribers but I keep getting error “Err126”
@@geekguideofficial Is it resolved ?. For me its Err127
Nikon d 7100- d 7500 දක්වා කැමරා තුන ගැන විඩියො එකක් කරන්නකො
Ayie mage channel එකෙ live streaming tutorial කරනවා puluwam mage channel eka patath enako.
Superb ayie
Thank you for the information, I tried RUclips settings on my phone but it doesn't work. Is there a solution?
do you have 1000 subscribers? because it requires that minimum requirements for youtube to go streamkey live streaming
Please help me I’ve tried all the process you’ve mentioned but I can’t find the live button on my canon camera
how many subscribers you have in the channel? minimum of 1,000 channel subscribers.
@@R2StudioMasterclass 144k 😁
Hmm that is weird. It should work. It's bit difficult to tell without looking. But once u create a schedule in live stream section, and connect your camera to your account it should detect.
My friend just got this camera I gotta let them now now!
It really worked for me
Great explain
Hi pls can this camera work with Weebil S gimbal
yes
Very important 🤗🙏
How to connect audio sir from speaker box to camera for best speaking audio in live stream
through mic input
Excellent Bruv ❤️🤟🏽👌🏾
What is Err127?
Not able to stream😢
do you have the 1000 subscribers in youtube?
Great
Gracias,por tu trabajo....mi canon no conecta al servidor ,da error
What was the error code?
do you have the minimum 1000 subscribers for the channel
Good
Sir, can you please clarify, do I have the option to give AC power to the M50 Cannon Mark 2 camera so that I can LIVE stream for 2 hrs+ in youtube. Secondly, If I'm using the OBS software and or streamyard software to stream to youtube/FB how do I go about setting up the camera for livestream..can you please give us a separate vdo or give me info on this here. Awaiting your response
yes i will try to do a video about this, yes you can find dummy batteries that will act as AC Adaptors
click.daraz.lk/e/_7cXWm
Try this link
Thanks for the video really helpful, im getting this error when I click the record button. Err126 could not connect to server. please help
i have 1000 subs on my channel between. but still not working
@@BaneCodes Same here, it did not work for me as well
hmm im hearing this from quite alot of people, according the canon site 126 error is when the camera cannot connect to the web server
i hv 1000 subscribers still getting this error 126
D250 also it can?
Nice
On point and neat! Very useful video!
Glad it was helpful!
Thanx Sir🙏
hello! writting from Argentina, sorry for my english. I do it all, but not showme the icon live streaming in the camera. You knowwht happened? Thankyou!!
do you have 1000 subscribers in youtube? If not it seems like this will not work
@@R2StudioMasterclass thanks for your answer. Im not have 1000 suscriptors. But i can live streaming too by pc
On my camera web services, there is no live icon even after following the process. i only got the canon image icon.
Do you have the 1000 followers in your RUclips?
@@R2StudioMasterclass yes I do
am not getting live streaming icon on my canon M50. I think the M50 does not support but it was added to the site I register from. I only see Upload to Web Service. Is there any other way please
Is it Canon M50 Mark II? Plus u need to have more than 1000 subscribers in your youtube
Can you please do one with Facebook?
Thanks bro, helped me a lot
thanks lot mate, it save me lot of time!
Glad it helped
Can you use multi camera with this setup
if you have a switcher yes, for live no
When I click to go live from my camera, I got an error, Err126 (could not connect to server)
I had the same Err126 :(
@@luistuaa update the firmware
@@nadeemraza5061 oh thank you!
do you have 1000 subscribers
@@R2StudioMasterclass yes I have 38000 subscribers
i've tried so many times and only get err127 every time no matter what. any ideas?
do you 1000 subscribers? if not you cannot do directly from the camera.
if you using the usb cable make sure the cable works properly
Grt info, can I connect through android?
Should be
hello sir. Can m50 ii record internally and give HDMI Output for streaming with Atem mini Pro
Your display get blocked when you use the external HDMI, But i think you should be able to record internally
Thank you
I have 2 canon m50 mk2, how can i paired both to livestream on RUclips
you cannot pair 2 cams and do multicam live stream, you need to use a sperate switcher for that.
Thank you very much
Hi, can you use the same instructions for the 1st edition M50???? I have been racking my brain for days... what am I doing wrong?
Through USB cable you can
@@R2StudioMasterclass but how do you do that? I have tried that and the HDMI way, nothing shows up when I try to livestream with RUclips
You can’t livestream on the m50 it has to be the M50 Mark ii
@@Itsmorganariel it is II
@@keithjohnson1109 not from the HDMI, Through the USB cable and Webcam Utility App, you can connect the camera to the computer like a webcam and do the live stream that way.
Do you have to schedule a live stream first?
yes you need to create it as per the steps i have shown, but u need to have atleast 1000 subscribers to do this
@@R2StudioMasterclass What if l have 100 scheduled live streams from before, so at the moment l can only see a short least on the camera, l cannot see the new one which l have created. Any suggestions on the way around that?
How long does it last with just the stock battery? thanks
more than 1 hour and 30 mins like
Niyamai aiye
Any option for going live, when the uploading speed less than 2 mbps?
you can use, it will be with bad quality
@@R2StudioMasterclass but while streaming with m 50, the video is buffering (it gets stuck or stops, not getting continuous streaming) when the signal strength is low.
Is there an alternative for the battery issue? I had read in some forum that there was way to charge via cable connected to pc with an alternative battery. is it possible?
if you using the stream function then the camera is getting the power from the USB C cable it self, or else you can buy a dummy battery with a power cable where you can use that with a wall socket
Is it possible to save the livestream on RUclips after ending the recording since it can't be saved on the memory card on the camera? And is it possible to do it the same way for livestream from Facebook? 😊
Yes it get saved on RUclips or Facebook. But the quality will depend on your internet connection quality
@@R2StudioMasterclass Ok. Good to know. Many thanks for the quick reply and for making such a great video 😀
Las opciones de studio youtube ,a día de hoy 2023 no son iguales.
For RUclips live , do we require Micro USB cabel attached to Laptop...plz reply
yes if you are using the canon Webcam Utility
@@R2StudioMasterclass No I directly want to do RUclips live without webcam
utility
Error 126b... solución actualizar firmware al 1.0.3
check the subscription level in your youtube channel
Hello sir, why i always got err127?
cable එකේ case එකක්, එහෙමත් නැත්නම් ඔයාගේ Subs ලා 1000ට වැඩිය ඉන්නවද?
I am not able to livestream on youtube after connecting my Y account to the canon website, can you help please?
I did all the steps but I am not able to live stream.
1000 subscribers
yes you need 1000 subscribers to do this
when I connect to the live stream on the camera it says "could not start [live streaming] mode. Check the streaming service settings" what am I doing wrong?
do you have more than 1000 subscribers in your channel
Is anybody else running into Err126?
I'm able to get through all this setup, select live stream from the camera, choose the name of the livestream, and then when I press the record button to start streaming, it says "Err126: Could not connect to server".
Same Err here! Did you fixe it?
cam.start.canon/en/C007/manual/html/UG-08_Wi-Fi_0220.html
Do you have 1000 Subscribers in your channel?
Err127 come what do
USB Cable එක check කරන්න, මටත් පලවෙනි පාර ඔය වගේ error එකක් අවා
I also get that error anyone know how to fix it?
@@naila2523 try to change the USB Cable and see
@@R2StudioMasterclass but the idea is to make it wireless. Why would I need the cable?? Sorry I’m new with this camera
@@naila2523 do you have 1000 subscribers? If not you cannot use this feature.
Good Job Ayya
I keep getting error 127, any ideas?
Do u have 1000 subscribers in your RUclips channel?
does anyone know if there is a time limit on how long you can record with the camera? and will the stream be saved to sd card?
never mind he says in the video it will not send to sd card
You got the answer
Getting an error description Err127
make sure you have min subscribers of 1000 in your youtube channel to have this option
Live kiyana eka cam eke pennanne nene. Okkoma hariyata kala
ඔයා USB cable එකෙන්ද try කලේ?
I always get an error 127
check the cable
@@R2StudioMasterclass Cable? Is this not suppose to be wireless?
@@primoshotz oh do you have 1000 subscribers and 4000 watch hours completed?
Sinhala පරිවර්තනයක් නැද්ද
තියෙනවා, අපේ channel එකේ බලන්න
Me cemara aka japan da
yes
💖
i get err 127
do you have 1000 subscribers in your channel?
@@R2StudioMasterclass no I don't, I guessed that's probably why yes
This is too much work to do one dam live stream. Sheesh
In a way true 😊
Cmon bro get a better internet connection
omg