This video demonstrates the design of CMOS inverter using Cadence Virtuoso Tool. Here, transient and dc analysis of performed along with the simulation results.
Hello sir thank you very much for this excellent explanation, please I have the same version of Cadence that you have, is there a method to add the library gpdk 180 nm
how to fix ERROR (SFE-1997): "input.scs" 27: V1: parameter `fall': The parameter `_gpar0' is used but not set. i think you drop howto fix, pls fix it thanks
sir, you design pmos and nmos with same W/L ratio in Actual w/l ratio of pmos should be 2.5 times greater than pmos i think but you got DC waveform Correct How is it possible?
Appreciate for the review. I got the DC characteristics OK. But important is has it crossed at midpoint (half the value of input). If it is not crossing then use pmos width Wp=2.5 that of Wn of nmos.
Hello sir while performing simulation I encountered this type of error Error found by spectre during DC analysis `dc'. ERROR (SFE-421): Undefined parameter name `dc'. Please solve my issue. Thank You
Hi, symbol creation is optional. If you want to simulate circuit directly you can simulate it without symbol. Generally symbol is used for hierarchical design.
Very clear explanation, Thank you so much Sir
You are welcome
Thank you sir for helping me, thanks to this video I can submit my homework
You are welcome
AMAZING. THANKS A LOT FOR THIS
Thanks very much
Excellent explanation..
Thanks You
Nice and smooth explanation sir. Thank you :) for your efforts
Thanks you. Appreciate for the response.
Sir, I am getting the same error while simulation. Could you kindly elaborate the error or the vpulse object property that you have modified?
Hi
provide the pulse input (voltage1=0, voltage2=1, risetime=50p, falltime=50p, pulsewidth=10n, period=20n)
@@dr.hariprasadnaikbhattu Thank you sir
Thank you sir ☺️☺️
So nice of you
Sir can you make a video on single stage Differential Amplifier to get a gain of 40db.
Thanks🙏🙏
You’re welcome 😊
Thank You ..
You are welcome
Hello sir thank you very much for this excellent explanation, please I have the same version of Cadence that you have, is there a method to add the library gpdk 180 nm
Yes, use library path manager from CIW window
@@dr.hariprasadnaikbhattu Thank you sir
Hello, thank you for your videos! I installed Virtuoso but i dont have gpdk, how to install this?
If you have gpdk library then there are method to do. Search on RUclips to add gpdk
how to fix ERROR (SFE-1997): "input.scs" 27: V1: parameter `fall': The parameter `_gpar0' is used but not set. i think you drop howto fix, pls fix it thanks
Hi, I don't know about that error. It may be related to model file missing
Sir, how are we supposed to model library in adel ?
Model Library already exist in cadence. NMOS and PMOS are used for 90nm technology.
Sir, how to input vector data to the city in cadence
Is it possible to to give the inputs from the matlab to cadsnce
No it is not possible to give input from matlab to cadence
sir, you design pmos and nmos with same W/L ratio
in Actual w/l ratio of pmos should be 2.5 times greater than pmos i think
but you got DC waveform Correct How is it possible?
Appreciate for the review. I got the DC characteristics OK.
But important is has it crossed at midpoint (half the value of input).
If it is not crossing then use pmos width Wp=2.5 that of Wn of nmos.
@@dr.hariprasadnaikbhattu sir can you tell how to cheak mobility values so that can decide Wp and Wn....thanks
Sir, how can I get the output shot noise in CMOS Inverter in cadence ?
I will go through it and come back to you
sir i am not getting gpdk in technology node. how to get that?
Hi, it should come with the tools
Can you make an inverter on ADE-XL ?
Design Process is same. ADE-XL has some advance function.
Sir I'm getting error like spectre terminated due to fatal error.Can you please tell me how to overcome
Hi, see the error. Becoz fatal error may be due to many reason.
See the main window for errors
sir ,is there any open source tool is there for virtuoso
Hi, search in site getintopc
Hello sir while performing simulation I encountered this type of error
Error found by spectre during DC analysis `dc'.
ERROR (SFE-421): Undefined parameter name `dc'.
Please solve my issue. Thank You
Hi, have you gave any where dc as input parameter. Check once again using the video
Sir where can i get this software.can ai artificial intelligence be used in this software and how
They are commercial. Try for any cracked version. Ai is not yet implemented
Sir how you installed cadence on windows 10 ??
I have used the VM-ware.
where i can get this software link ?
Hi,
It is a virtual machine based. Use this link.
getintopc.com/softwares/simulation/download-cadence-ic-design-virtuoso-gpdk-library-4532376/
Sir please provide videos on SRAM CELL USING VIRTUOSO
Hi, I am working on it may take time
can u make a video on how to install this software BCS currently Iam in 7th sem VTU I required this software for practise
which software
Sir this is front end or back end sir can you tell me plz ..
Hi, that was backend design
@@dr.hariprasadnaikbhattu ok sir... Thanq sir .. Is there any frontend design vedio Sir
How to download cadence virtuoso software sir
I am getting spectre terminated prematurely due to fatal error instead of waveform
Raeson may be undefined library models
How to fix error or rise tym
Hi, I could not get your question. Try to increase the risetime during simulation
sir how to import finfet library
Latest version have finfet in built. Earlier version finfet not there.
But you can use the ptm models
Sir how do we download cadence virtuso?
It is a commercial tool.
sir how to download the software
Hi, it is commercial. But can work any working with crack. Use
www.getintopc.com
search the related software
thx sir@@dr.hariprasadnaikbhattu
YOU DONT NEED TO CREATE A SYMBOL TO SIMULATE. SYMBOL CREATION IS TIME CONSUMING. ALSO YOU MISSED IMPORTANT COMMANDS LIKE PRESS ESCAPE KEY ETC.
Hi, symbol creation is optional. If you want to simulate circuit directly you can simulate it without symbol. Generally symbol is used for hierarchical design.
From where do I download and install Cadence tools such as virtuoso 6.1.x with license ?
It is a commercial tool.