Well I gotta say that is a beautiful re creation you did there, you should be proud of your abilities! I can't wait to do patina like that on my 53 GMC truck, but I'm throwing caution to the wind and going black!
Very nice and a natural looking patina created in 3 hours . Thanks for the walk around and exposing the lurking beast under the hood. Be beautiful man, and totally ate up. I dig it!
Dam bro, looks so dam good, I'm getting ready re do my patina on my 68, I did it wrong the 1st time, I'm gonna do what you did but ill do black, rusty red, the hugger orange with a white top then clear it. I shaved my drip rail on mine and I have the new flush mount windshield and rear glass, can't wait, watching you work on yours makes me wanna do mine asap but fkn doing a addition to the house
Look up homegrown custom FAB and they have a quick video of my 68 when they did the 4 link on it but you'll see how I did the patina but I don't like it, I like your method better. But look em up on RUclips and you'll see
Lol yeah I wanted to do a nice show paint job but I’m happier with this. If It gets a scratch who cares 🤘 Plus there’s some stores behind some of the dints.
@@ksduathlete yes it still looks the same. I used a clear coat that is rated for 8 years. And if I wax it or park it under a shelter I’m sure it will last longer. I blew up the engine two years ago and it’s been sitting in the elements, I recently got a new engine for it and will be putting it back together soon.
@ I cut mine down to a short bed . I got so many layers of paint on it . Housepaint too.. it’s got lots of character. I just want to sand it down but not fix all the dents . Spray a black primer then shoot it white . Sand thru or might try using lacquer thinner to wear through then clear coat it . Have to wait until spring !
@ Eastwood tools has a 4 inch wide grinder/sander that is really good at removing paint Harbor freight has a similar tool. That’s what I would use. If I was you you can buy low cost Direct to metal primer but don’t skimp out on the clearcoat.
@@rowdyridesbryanacres3106 100% thanks Yeah I went to a few here and they all suck and don’t have the selection to actually view 1.25” - 1.5” Canada.. go figure .. like finding the holy grail
@@cdnbroncolife1889 71994 is the upper radiator hose # but if I had a truck water pump It may not work. I am running the LS1 Camaro water pump. But it does look like I cut this hose to fit so it might would work on the truck style if it wasn’t cut
Nice. Just searched for this and the black underneath was exactly what I was looking for. I’ve got a blue 72 elco that had an engine fire before I bought it and think this would look good on there.
I used PPG shop line JP202 primer surfacer on this and I used sherwin Williams Dimension base. The primer is a good cheap primer and the base was what I could get that day neither one or anything special but both work just fine
@@rowdyridesbryanacres3106 I’m buying my brother 67 c10. I did a patina paint job on it a couple years ago but it was rattle can. I’m wanting to do one like yours. I want to do that old Chevy blue color on top. Anyway I’m hoping not to spend over $500. Like you I’m not too worried about small dents . I may replace a fender on the passenger side . I’ve got ideas about making it a shortbed too so obviously that’s way more than $500! I got a lot of ideas in my head ! If you look at my channel there’s a video on the 67c10.
@@ksduathlete if you’re wanting a glossy finish I definitely recommend going basecoat clearcoat and make sure you buy a clearcoat that is easy to buff. Only reduce your base 25% and spray it 75% overlap. Use a tack cloth between coats put an extra coat of clear so that you can send some off if you have to buff.
What a sick result man. Haters gon hate lol I’ve got a yellow 72 c10 that I’m going to start sanding down. Would love to connect. Body straight not any dents, so you went black base, blue base, clear? Anything else using the gun?
It has 2 thick coats of 2021clear, 1 coat of the blue so it was easy to sand off, 2 coats of the black primer. It’s starting to have issues where the black shows threw. Because the black does not have UV protection.
My first visit. Nice...great actually. New sub.....get hold of MN Outlaw and he’ll assist with subs. He’s a great guy. Look him up and have a quick chat. He’s got good start and huge growth which gets $$. What are your wheels?
This is fucking mint bro. Any chance I can have a run down for dummies? hahaha Ive not done any painting and I've got a rusty truck I'm about to try and bondo up and patina. If you get a chance would love to know what kind of sandpaper you used for the effect and what kind of paint , How you prepped it before you sprayed black? All that good stuff ahaha. Thanks man
Thanks bro. I have been thinking of doing a video like that. I almost did it on this truck but I took some short cuts that I wasn’t proud of on it. I may do one soon.
@@arlenmartin8672 you don’t need anything fancy but it it’s much easier to achieve with a good gun. But do not go cheap on the clear coat. I did not polish / buff this truck.
Sorry to bother you again but about how long did you wait to spray the blue over the black and how long did you wait to sand through after spraying. Also how long did you wait before you did the clear coat.
I wasn’t a fan of it myself. The body gaps and overall condition of the body is pretty rough. Thanks to thin aftermarket parts. So this was the cheapest easiest way to paint the truck and stop the rust. It turned out much better looking than I expected. People love it. I can’t even stop at a red light with out people complimenting it.
Thank you. I’d have to agree. I can always sand the clear with 800 or wash it with a scotch pad to give it the flat look where I want it and be shiny where I want like the real thing.
It look dope you can actually whipe and wax the clear so you have a clean patina not a dingy dusty patina truck that looks dirty. Don’t get me wrong patina with out clear is bad as well
Judging by everyone’s reaction now verses when it was black for 4 years. I’d definitely say people like the “Store bought jeans with holes in it” much better lol 🤘🏼 But just like I said in the beginning of the video. The body on this thing fits like hell with all the aftermarket parts. Painting it correctly, all black would look horrible. Besides there are thousands of black c10s on the street. I’ve yet to see another patina blue c10, but yes I’m sure they are out there. I appreciate you watching, commenting, and giving your opinion on it.
Well I gotta say that is a beautiful re creation you did there, you should be proud of your abilities! I can't wait to do patina like that on my 53 GMC truck, but I'm throwing caution to the wind and going black!
@@alberta59 thank you I would love to see the 53 when you’re done
@rowdyridesbryanacres3106 for sure, building the chassis right now, it will be awhile.
My jaw dropped when I seen it laid out! I’m really considering to do this to my body dropped Tacoma. Great job man!
lol thanks buddy
I’ve been considering a job like this on my 2007.5 Sierra.. definitely made me want to do it even more. Killer job 👍🏼
Thanks buddy Do it 🤘
🔥🔥🔥🔥🔥 one the best patina paint jobs out there 🔥🔥🔥
Thanks buddy
Very nice and a natural looking patina created in 3 hours . Thanks for the walk around and exposing the lurking beast under the hood. Be beautiful man, and totally ate up. I dig it!
I got one in dark blue thems good trucks. Looks good
Love the finished look to the truck. Many people do too much, making the patina look more manufactured than natural. Yours looks great
Thanks. Yeah I feel the same way.
Good job Brother! Very talented!
Great job man! Amazing!
Came out really nice!👍🏽
Looks perfect
Thank you buddy
Looks dope! Congratulations on the little baby!
Thank you!
Love the paint job bro.
Nice job dude! Your making me miss the one I sold.
Beautiful truck. Breakin necks for sure 💯🤘🏼
Looks awesome brother
Badass truck.
That looks mental 👌
Thank you buddy
@@rowdyridesbryanacres3106 your welcome take care..
Damn that’s impressive AF! Looks killer!’
Dam bro, looks so dam good, I'm getting ready re do my patina on my 68, I did it wrong the 1st time, I'm gonna do what you did but ill do black, rusty red, the hugger orange with a white top then clear it. I shaved my drip rail on mine and I have the new flush mount windshield and rear glass, can't wait, watching you work on yours makes me wanna do mine asap but fkn doing a addition to the house
Nice I’d love to see it @bravojuan559
@@rowdyridesbryanacres3106
I'll make a video of it man and show you, I like your trk man keep it up,
Look up homegrown custom FAB and they have a quick video of my 68 when they did the 4 link on it but you'll see how I did the patina but I don't like it, I like your method better. But look em up on RUclips and you'll see
I like it. Where are you from?
@@rowdyridesbryanacres3106
Thank you, I'm from Hanford CA
Looks great!
Awesome video and beautiful truck brother. Can tell how stoked you are in the video. HaA BAD AS%S..
Nice video man, makes me miss my 67!
From Mexico we say hi!, Damm! Men looks so great, I will do on my Cheyenne 91 I promise and I will show you the picture! (Y)
Thanks buddy looking forward to it
you gotta do this to mine lol, looks great man
Thanks buddy. Hey I can put you on the list. Lol
10:35 the dang dog actually climbed that tree. Nice paint job.
Thanks. Yeah she’s a nut.
Man it turned out good what kind of clear you used its shinny as hell!!
@@andrewarren2701 thanks bro. I use PPG 2021 high solids clear
Love it great build…..!
Congrats!
Your C10 looks Bad Ass 👊
Awesome 💯💯💯💯💯
I dig the look buddy
Thanks I wasn’t sure until i seen it
Nice work!!!
Hey man , don't you worry about the black part job , this results is very cool.😊
I really appreciate that this definitely stands out more.
Looks good man 👌
My dude 😮
I want mine painted just like this but in 504 medium olive green
Looks great 👍
Piss on it. I’m doin my 70 c20. You made up my mind for me
Lol yeah I wanted to do a nice show paint job but I’m happier with this. If It gets a scratch who cares 🤘
Plus there’s some stores behind some of the dints.
I think it's nice I have an all original 66K20 that I am currently Putin bondo in
Man You killed it,I was going Candy!But I can build off of You💪
Hell yeah brother...
looks good
Looks good brother got your self a new subscriber!👊🏽
Thanks buddy
Looks good.. mines turning out about the same but my color has more green in it.. that clear coat is super wet tho..
Looks mean!
Thanks buddy
Curious if this paint job is holding up… I’m going to do the same to my 67 c10
@@ksduathlete yes it still looks the same. I used a clear coat that is rated for 8 years. And if I wax it or park it under a shelter I’m sure it will last longer.
I blew up the engine two years ago and it’s been sitting in the elements,
I recently got a new engine for it and will be putting it back together soon.
@ I cut mine down to a short bed . I got so many layers of paint on it . Housepaint too.. it’s got lots of character. I just want to sand it down but not fix all the dents . Spray a black primer then shoot it white . Sand thru or might try using lacquer thinner to wear through then clear coat it . Have to wait until spring !
@ Eastwood tools has a 4 inch wide grinder/sander that is really good at removing paint Harbor freight has a similar tool. That’s what I would use. If I was you you can buy low cost Direct to metal primer but don’t skimp out on the clearcoat.
@ thank you 🙏
Fuckin love it. Patina my truck but toss up on gloss or matte clear. 👍🏾
Thank you 🤘
Satin or flat clear !
Looks good not sure about gloss clear matte might of looked more realistic but you did a good job
Great job!
One question
Upper ear hose ! Do you have a part number by chance!? Wouid save me some hassles ! Thanks In advance
Thanks buddy. Not sure what your asking
@@rowdyridesbryanacres3106 what upper rad hose did you use ?
@@cdnbroncolife1889 oh I will look tomorrow and see if the number is still on it.
I went behind the counter at the parts store and found that one.
@@rowdyridesbryanacres3106 100% thanks
Yeah I went to a few here and they all suck and don’t have the selection to actually view 1.25” - 1.5”
Canada.. go figure .. like finding the holy grail
@@cdnbroncolife1889 71994 is the upper radiator hose # but if I had a truck water pump It may not work.
I am running the LS1 Camaro water pump.
But it does look like I cut this hose to fit so it might would work on the truck style if it wasn’t cut
Nice. Just searched for this and the black underneath was exactly what I was looking for. I’ve got a blue 72 elco that had an engine fire before I bought it and think this would look good on there.
Bring it here to the north Florida and I’ll put it on it for you
I want to bring my 1984 gmc sierra 1500 classic to you man
Hey you can. I’m in north Florida.
@@rowdyridesbryanacres3106 I'm out here in Las Vegas. Definitely would be worth the trip
What kind of black did you use looks awesome brother
It was just solid black base coat. I don’t remember the brand I was trying something new. It didn’t hold up well. Next time I will use ppg.
can't fake patina but you did well
Patina? Black patches.
What are the two colors that you used I want to match it to a gbody I got
The blue is the factory 507 blue and the black is just generic straight black.
Cool Video! Could I ask you about your workshop? What size is it?
ruclips.net/video/hhJQyakIuHo/видео.html
Hers a video all about my shop. But to answer your question. It is 26x35.
If you shaved the gas filler did you remove the tank out of the cab? And where did you relocate it?
I made a fuel cell and mounted it to the frame rail just like the 1973 and newer trucks.
That looks soooooo fucking sickkk 🔥🔥🔥🔥🔥🔥
Would love to know what blue that is??
1968 GM 507 blue
What color black and blue did you use?? Been planning on doing this to my 72 Nova and I love your color choices!
1968 gm 507. Sorry I just seen this comment.
I love it. What brand of primers and paints did you use?i saw your reply on the gloss
I used PPG shop line JP202 primer surfacer on this and I used sherwin Williams Dimension base. The primer is a good cheap primer and the base was what I could get that day neither one or anything special but both work just fine
@@rowdyridesbryanacres3106 thank you . I won’t use tractor supply paint then! Lol
@@ksduathlete what’s your budget and are you trying to do?
@@rowdyridesbryanacres3106 I’m buying my brother 67 c10. I did a patina paint job on it a couple years ago but it was rattle can. I’m wanting to do one like yours. I want to do that old Chevy blue color on top. Anyway I’m hoping not to spend over $500. Like you I’m not too worried about small dents . I may replace a fender on the passenger side . I’ve got ideas about making it a shortbed too so obviously that’s way more than $500! I got a lot of ideas in my head ! If you look at my channel there’s a video on the 67c10.
@@ksduathlete if you’re wanting a glossy finish I definitely recommend going basecoat clearcoat and make sure you buy a clearcoat that is easy to buff.
Only reduce your base 25% and spray it 75% overlap. Use a tack cloth between coats put an extra coat of clear so that you can send some off if you have to buff.
Can I fly you out to Brisbane Australia to paint my ute (pick up truck to you mericans) ?! That shit looks killer cobber!
Lol that would be cool 😎
Gloss clear
I believe you sanding with a 320 paper right ?.
I sanded the blue with 600 and then used a red scotch bright to get the it to look more natural.
Looking to try that in my c300 Mercedes. Smile.
What color blue is that?
Gm 507 blue. It was the original 1968 color
What a sick result man. Haters gon hate lol I’ve got a yellow 72 c10 that I’m going to start sanding down. Would love to connect. Body straight not any dents, so you went black base, blue base, clear? Anything else using the gun?
how many coats of prime,base,clear did you do?
It has 2 thick coats of 2021clear, 1 coat of the blue so it was easy to sand off, 2 coats of the black primer.
It’s starting to have issues where the black shows threw. Because the black does not have UV protection.
My first visit. Nice...great actually. New sub.....get hold of MN Outlaw and he’ll assist with subs. He’s a great guy. Look him up and have a quick chat. He’s got good start and huge growth which gets $$. What are your wheels?
Nice thanks. The wheels I’m running for now are 22x9 by bigg I do not know the name of the wheels. I made a video about the tires.
Was the first coat of black a primer or base?
It’s got a black epoxy then black base so both
This is fucking mint bro. Any chance I can have a run down for dummies? hahaha
Ive not done any painting and I've got a rusty truck I'm about to try and bondo up and patina. If you get a chance would love to know what kind of sandpaper you used for the effect and what kind of paint , How you prepped it before you sprayed black? All that good stuff ahaha. Thanks man
Thanks bro. I have been thinking of doing a video like that.
I almost did it on this truck but I took some short cuts that I wasn’t proud of on it. I may do one soon.
Did you wet sand after or just leave it be? Looks super smooth?
No buffering I just turn up the pressure and hammer it on to make the high solids clear slick out.
Okay man I think ima try it on my c-10. It’s very straight and primed black
Why does everyone clear their Patina with gloss? They make Matte clear coats that would alot more realistic.
Just preference. But it definitely irritates some people to see fake patina.
Was the black coat a primer and can you do this with a cheap gun.
There’s black metal primer, then gray filler primer, on the body work. Then I sprayed black base, blue base, then clear 🥵
Bryan Acres thanks and do need any fancy spray gun or anything like to get those results. Also did you wet sand and polish
@@arlenmartin8672 you don’t need anything fancy but it it’s much easier to achieve with a good gun. But do not go cheap on the clear coat.
I did not polish / buff this truck.
Bryan Acres thanks
Sorry to bother you again but about how long did you wait to spray the blue over the black and how long did you wait to sand through after spraying. Also how long did you wait before you did the clear coat.
The high gloss over faux-tina really works! Great job. What was the color you sprayed over the black? Is it a super light powder blue?
Thanks yeah it’s a very light blue it’s the factory color I do not remember the paint code if you want it I can find it
@@rowdyridesbryanacres3106 - thanks. Paint code is not necessary. Just knowing that it’s blue and not plain gray is helpful.
Yeah the color doesn’t pick up on camera very well. sometimes it looks white. sometimes it looks gray but it’s a nice baby blue in person.
What color is your base?
The stock Gm 507 blue 🤘
What paint brand did you use?
I used Ppg 2021 clear witch was around 5 years old 😬 and 4th dimension base by Sherwin Williams.
@@rowdyridesbryanacres3106 it looks amazing man.
Hey bro where are you located I'd love for you to do my truck
I’m in lake city Florida. I’d love to do another. You can message me on Facebook if you’d like.
I’m sorry but I guess I’m too old to understand the “patina “ thing.
You sure put a lot of work in that truck
I wasn’t a fan of it myself.
The body gaps and overall condition of the body is pretty rough. Thanks to thin aftermarket parts. So this was the cheapest easiest way to paint the truck and stop the rust.
It turned out much better looking than I expected.
People love it. I can’t even stop at a red light with out people complimenting it.
I have had multiple real patina trucks and this is a great effort and nice but matte clear may have been better-
Thank you.
I’d have to agree.
I can always sand the clear with 800 or wash it with a scotch pad to give it the flat look where I want it and be shiny where I want like the real thing.
Paint looks a mile deep man. Dripping wet.
Thanks buddy. I love high solids clear.
Nice video - the music is way too loud.
Thank you for the feed back.
That was the first video I ever added music too. I will tone it down in the future.
It's not patina paint. If it's not original paint is it?
What would you like people to call it?
If your going to keep cousin this is the last I’ll see this video what a shame
Looks good but it honestly looks nothing like patina
I wouldn’t have clear coated it. Shiny patina makes no sense
It look dope you can actually whipe and wax the clear so you have a clean patina not a dingy dusty patina truck that looks dirty. Don’t get me wrong patina with out clear is bad as well
Painting patina on an old vehicle is like buying jeans with holes in the knees, tacky and pretentious. Shoulda left it black.
Judging by everyone’s reaction now verses when it was black for 4 years. I’d definitely say people like the “Store bought jeans with holes in it” much better lol 🤘🏼
But just like I said in the beginning of the video. The body on this thing fits like hell with all the aftermarket parts.
Painting it correctly, all black would look horrible.
Besides there are thousands of black c10s on the street. I’ve yet to see another patina blue c10, but yes I’m sure they are out there.
I appreciate you watching, commenting, and giving your opinion on it.
What’s your instagram bro would love to keep up with the build
It’s my name. Bryan Acres or you can look up #blueberryc10 or #bryanspsint
looks good
Thank you