I dropped my aw customs hk2002 hi Cappa and it only shoots when you rack the slide back and it shoots all the bbs out of the mag I tried fixing the spring leaf but nothing
Could be a bunch of things. I would check the trigger bar and make sure it didn't get bent. You can also take out the beaver tail and see what's going on inside when you pull the trigger.
On the right of the trigger bar, in the front is a small cut. You can bend that piece but, I wouldn't mess with it if you don't know what it is for. The trigger bar is easily bent and will not slide smoothly if you twist or bend it. This has to be done carefully or you might ruin the bar.
Could you help me with mine? When the slide goes back the hammer dont stay down it only comes back up and the trigger is stuck. The slide also get stuck at the notch used to disassemble the gun's slide. It's an jag arms gm4 and I hope you can help me Edit: after having disassemble the gun I repaired the trigger problem and I discovered that the fact that the slide sometimes get stuck is because the hammer dosen't lock properly and made the slide not able to come back.but the hammer still doesn't lock and I hope you can help me with it
First thing I would check is the sear spring. Make sure it didn't slip underneath the sear. Second I would check the hammer and or sear for damage. Maybe your hammer spring also.
Heavy Metal Airsoft Hi ! I’m looking for somebody who can help me with my Tokyo marui 1911.. You look experimented :). When I pull the slide, a part inside the slide stick with the barrel. And it goes back only when I slide further.. It happen only when the mag is in. Very hard to explain but I uploaded a video on my channel If you could help me with that I’d appreciate ! Thanks a lot
I think your talking about the nozzle. The magazine is pushing on the nozzle and getting stuck on the rubber gas router. Some oil would help but, you could also replace the nozzle return spring as these wear out fast. Your bucking might have swollen if it got excess oil inside, you can check this with the mag out and pulling the slide back. The nozzle should stay in the barrel(bucking) for a few mm then snap back from the spring tension.
I dropped my aw customs hk2002 hi Cappa and it only shoots when you rack the slide back and it shoots all the bbs out of the mag I tried fixing the spring leaf but nothing
sounds like the leaf spring is going under the sear. It shoots full auto?
Hey can you help me out my highcappa has been having a very stiff trigger preventing me from firing fast like normal
Could be a bunch of things. I would check the trigger bar and make sure it didn't get bent. You can also take out the beaver tail and see what's going on inside when you pull the trigger.
What tab are you talking about on the trigger ring? I also have the problem of installing a new airsoft masterpiece trigger ring
On the right of the trigger bar, in the front is a small cut. You can bend that piece but, I wouldn't mess with it if you don't know what it is for. The trigger bar is easily bent and will not slide smoothly if you twist or bend it. This has to be done carefully or you might ruin the bar.
@@heavymetalairsoft6188 what does bending the trigger bar do exactly?
It shortens the length of pull if you have a lot of take up or slack.
Could you help me with mine? When the slide goes back the hammer dont stay down it only comes back up and the trigger is stuck. The slide also get stuck at the notch used to disassemble the gun's slide. It's an jag arms gm4 and I hope you can help me
Edit: after having disassemble the gun I repaired the trigger problem and I discovered that the fact that the slide sometimes get stuck is because the hammer dosen't lock properly and made the slide not able to come back.but the hammer still doesn't lock and I hope you can help me with it
First thing I would check is the sear spring. Make sure it didn't slip underneath the sear. Second I would check the hammer and or sear for damage. Maybe your hammer spring also.
Heavy Metal Airsoft Hi ! I’m looking for somebody who can help me with my Tokyo marui 1911.. You look experimented :). When I pull the slide, a part inside the slide stick with the barrel. And it goes back only when I slide further.. It happen only when the mag is in. Very hard to explain but I uploaded a video on my channel If you could help me with that I’d appreciate ! Thanks a lot
I think your talking about the nozzle. The magazine is pushing on the nozzle and getting stuck on the rubber gas router. Some oil would help but, you could also replace the nozzle return spring as these wear out fast. Your bucking might have swollen if it got excess oil inside, you can check this with the mag out and pulling the slide back. The nozzle should stay in the barrel(bucking) for a few mm then snap back from the spring tension.
Hi! Can you please tell me where he got that lower frame from? Ive been looking around for quite a while but i can find one. Thank you!
That's what everyone wants to know lol. He bought the build complete from someone in Ohio. The frame was probably ordered shortly after the release.
@@heavymetalairsoft6188 Ok thank you. I've emailed the guys over at laylax to ask them where i can buy that frame from. Hopefully they answer.
Good luck man, that one sold out quick!