So quick question what are the Christmas Ornament Balls do you use? I keep getting mixed results on the ones that I have purchased. I see on your link you have the flat glass ornaments but not the red round ones.
We purchase ours from Michael’s, they are typically on sale for like 5 bucks around Christmas time for a pack of 12. They always work out great, some of the other colors like shiny and matte blue are awesome too. You should check out our project collection videos we have pdfs in the description that have a bunch of settings and links to where you can buy the materials www.michaels.com/product/whitehurst-12ct- 275-shiny-glass-ball-ornaments-D385012S
Great info! 👏Do you have a link where to buy that LASER MUDULE light you mentioned at the 1.37 mark - I tried the framing method, but the framing rectangle just blips on the screen, then disappears, so I have to press framing again, and when I did the design, everything was misaligned. Please indicate where to buy the laser module - I tried Google, but nothing popped up under the laser module search. Thanks !!! I have an F1 Xtool Laser machine.
Hey you we have an affiliate link, xTool sells it as part of a bundle. We also have a video on our channel that’s an overview of the bundle if you are interested. Yeah the framing trick is very fast, the laser module makes it a lot easier www.xtool.com/products/xtool-accessory-kit-for-ra2-pro?ref=S6sSoEXkKzuxyx&variant=44249326813423
Yeah we just pour a small amount into the bauble, then spin it around and tap it to spread out the paint inside. Once the design is fully covered just set them propped upside down so any access paint can drain out, because if there is too much paint inside it would take forever to dry. Hope that helps!
Hola podrías hacer un vídeo de cómo grabar tazas con asa o vaso de acero inoxidable sin capa de color con el rotatorio? Tengo parámetros para grabar en plano IR 200/100/1270 Jarvis, pero no funcionan con el rotatorio aunque le indique que es cilíndrico con mandril. Me podrías ayudar por favor? Muchas gracias
Great video! Perfect timing for doing my Christmas balls, tomorrow.
Awesome video! Thanks!
Actually pretty simple but I didn't think of it. Thank you this worked very well!
You bet! Happy we could help!
So good! Just finished my first one - can't wait to do more!🤩
Awesome! Happy to hear that!
This is so helpful! I just bought 2 sets of ornaments to try on.
Awesome! Have fun! They are so fun and quick to make!
Your videos are very helpful and clearly explained. Subscribed 👍🏼
Welcome aboard! Thank you for the support!
This worked great, except that the engraving on the back side is crooked. Any thoughts on what could be happening? I've had to trash 4 tumblers.
Thank you so much for the video!
Glad it was helpful!
So quick question what are the Christmas Ornament Balls do you use? I keep getting mixed results on the ones that I have purchased. I see on your link you have the flat glass ornaments but not the red round ones.
We purchase ours from Michael’s, they are typically on sale for like 5 bucks around Christmas time for a pack of 12. They always work out great, some of the other colors like shiny and matte blue are awesome too. You should check out our project collection videos we have pdfs in the description that have a bunch of settings and links to where you can buy the materials
www.michaels.com/product/whitehurst-12ct-
275-shiny-glass-ball-ornaments-D385012S
@@VelfCreations Thank you. The last set I purchased didn't cut all the red off then the current set gives me some weird peeling shards.
Great info! 👏Do you have a link where to buy that LASER MUDULE light you mentioned at the 1.37 mark - I tried the framing method, but the framing rectangle just blips on the screen, then disappears, so I have to press framing again, and when I did the design, everything was misaligned. Please indicate where to buy the laser module - I tried Google, but nothing popped up under the laser module search. Thanks !!! I have an F1 Xtool Laser machine.
Hey you we have an affiliate link, xTool sells it as part of a bundle. We also have a video on our channel that’s an overview of the bundle if you are interested. Yeah the framing trick is very fast, the laser module makes it a lot easier
www.xtool.com/products/xtool-accessory-kit-for-ra2-pro?ref=S6sSoEXkKzuxyx&variant=44249326813423
Thanks! Is that kit for F1 - on the info it seems is for D model @@VelfCreations
It’s the same kit for all the machines. It just attaches to your existing RA2 pro
great information!
Great, thanks!!
You bet!
I'm sore this will work even when using the Xtool S1 correct?
Hmm should be something along the same lines. Sorry unfortunately we don’t have an S1 to test with
Appreciate the response thank you 😊
Can I ask how you added the white acrylic paint to the logo on the baubles?
Yeah we just pour a small amount into the bauble, then spin it around and tap it to spread out the paint inside. Once the design is fully covered just set them propped upside down so any access paint can drain out, because if there is too much paint inside it would take forever to dry. Hope that helps!
@@VelfCreations It's just that I thought the red colour was also put inside the bauble when they made it. Thanks for the reply. Much appreciated.
Ah gotcha! Of course happy to help 😄
@@VelfCreationsare you able to do a video on that. I tried it but didn’t come out good. Thanks!
Hola podrías hacer un vídeo de cómo grabar tazas con asa o vaso de acero inoxidable sin capa de color con el rotatorio? Tengo parámetros para grabar en plano IR 200/100/1270 Jarvis, pero no funcionan con el rotatorio aunque le indique que es cilíndrico con mandril. Me podrías ayudar por favor? Muchas gracias
ruclips.net/user/shortsjQdxv6pohuU?si=R14G-7VHlBtls-r-
Are they freezer safe?
Ignore my post. It was the wrong video
😂