Это видео недоступно.
Сожалеем об этом.
LASER ENGRAVE HARBOR FREIGHT TOOLS WITH THE XTOOL F1 ULTRA
HTML-код
- Опубликовано: 10 июл 2024
- #xtool #F1ULTRA #pcbway
PCBWay: www.pcbway.com
To Purchase Save $800 - US Store: bit.ly/3R54XIp
EU Store: bit.ly/453DBI4
DE Store: bit.ly/3QZpZI3
FR Store: bit.ly/3UUTsUS
UK Store: bit.ly/3x0VIBW
xTool F1Ultra
Watch my video on how I engraved all the items you see in the thumbnail! This is the most versatile lasers I have every used! You can engraved so many materials. No, you cannot cut or engrave clear acrylic.
My F1 Ultra didn't come with safety goggles. Since not all material fits under the shield, I hope xTool provides safety goggles with the F1 Ultra. Especially with using the conveyor, the shield cannot cover the laser light.
* Exclusive Tech - Auto Streamline Production, 3D Curve Engraving, Pixel Algorithm for HD Photo Printing
* Working Area - 220*220mm - 220*500mm (with conveyor)
* Laser Power and Laser Source - 20W Fiber Laser + 20W Diode Laser
* Focus Adjustment - Auto Focus with Camera Manual Focus (Two dots Alignment)
* WiFi
* Deep Metal Engraving
* Pre-assembled
* Flame Detection
* Built-in Camera
* Fully Enclosed and Has an Exhaust
* Optional Conveyor for Batch Processing
* Product Size - 273*373*492mm, 14.7kg
Chapters -
Intro - 0:08
Harbor Freight Tour - 0:29
Axe Laser Cleaning Pass - 2:31
Axe Making Design - 5:57
Axe Handle - 9:48
Video Sponsor - 11:01
Pocket Knife - 12:23
Hammer Head- 14:00
Hammer Handle- 15:20
Plastic Ammo Can - 16:18
Metal Ammo Can - 17:35
Bloopers - 19:46
@harborfreight #harborfreighttools #harborfreight
2nd Amendment SVG
www.etsy.com/listing/60406820...
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
/ tripodsgarage
/ tripodsgarage
/ tripodsgarage
Thanks for watching - Please Like and Subscribe!
xTool Tags
#xtool #xToollasermachine #fiberlaser #laserbusiness #metallasercuttingmachine #fiberlaser , #laserengraving , #jewelrymakers , #xToolF1ultra , #lasermachine , #metalengraving , #lasercutter , #metalsmith , #businesslaser #metalengraving
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 , ATOMSTACK A5, #xtool #20watt 20 Watt laser #fiberlaser
This is the type of video I've been looking for. I've been playing around the last couple of weeks, engraving silverware, tools, cleaning rust from tools, etc. Nothing is safe in my house - lol. Now I need to take a trip to Harbor Freight. Thanks for the great video!
So glad I could help! Nothing was safe when I started with lasers either 😂😂. Cannot wait to see your creations 👍
Wow! Learned so much quickly. Best video on the ultra and how to actually use it ive seen yet. Thanks!!
Many thanks! Tried to put a lot into 20min video.
@@TripodsGarage where do i find the 2nd am. Circle you used for the box? I have a friend wanting one already 👍🏻
@@adinamm- The location of the file is in the description 👍
@@TripodsGaragegot it thanks!
Huh... Now you're gonna make me go spend a fortune at Harbor Freight John. *Thanks for that!* _Great video!_
Hmm, did you already have an addiction? I will take the blame from this point forward 🤣🤣. Thanks for watching and commenting!
Just got my F1 Ultra and wanted to see what settings you used, since a friend at work is already asking me to etch his tools :) Nice results! I think on the pocket knife, since it's a galvo laser, you want the thumb catch directly under the center of the laser, so the circle around it doesn't get distorted. Ignore what the camera shows since the camera's offset, just make sure you measure correctly. So focus on the blade, then slide it over so the catch is centered.
Once the three D engraving is activated it will be amazing. That looks superb.
3D engraving is technically live, as what xTool calls embossing. However, I suggested that they enable the descending Z for other engravings besides embossing. Thanks for watching and commenting 👍
Thanks, for the walk through. Why did you not clear out the filled enclosed areas in the letters like the P, R, O and D?
Thanks for watching! Gave it a few tries, and failed. Figured I would try to fill them again on a later date. Think it was because I was using the outline.
I absolutely love the axe heads! Gives me groomsmen gift ideas...
Nice! Do you have a fiber laser? I might know someone that does 🤔
I don't... and the guy that I know near me who has a laser, hasn't used it yet and he's one of my groomsmen, so I probably shouldn't ask him for help here 😂
Nicely done
Many thanks!
Looks great John! 👍
Many thanks!
Great idea 👍🔨
Thanks!
Hey Tripod, I'm a complete beginner (bought your Falcon 2 40w) and was wondering how you figure out how to figure out what power and speeds you need for different materials. All the videos I've seen haven't been that great. Think that might be a video you could make? (Complete noob video haha)
Hey Brad!
Materials are very tricky. Especially wood can be a little different each time, due to hardness and how close the rings are. However, there is a material chart that you can start out with as a reference from Creality.
store.creality.com/ca/blog/creality-falcon2-laser-engraving-cutting-settings
Also you can take a look at my xTool D1 40w as a reference also.
I tried the metal ammo box and am not gettting a clean-shiny metal finish. I increased my passes and used the same settings. Any other ideas thanks!
I would gradually increase the power, one pass at a time. Make sure you level the box
I tried sticking my tool in a laser engraver Only smelled burnt hair
The wife just saw me laughing as I read your comment 😂
Disclaimer- Do not attempt!