Thanks so much! This was fairly easy with your help. Beforehand I tried it unsuccessfully. Especially changing the mode to prioritizing the load being most economic (mostly from PV or battery directly) was my pain point. Keep it up!
Thanks for the info, just to help, does that lives in (PR) do not choose Puerto Rico, my experience was no data, it will route you to the no US server, I change mine with a new registration using United Stated, and with the map locate my spot, that did the trick, got mine working.
For the server domain, would I still want to change that I'd the system is in Mexico? And I want to view it from both Mexico but more importantly when I'm in the US? The big issue I have is that when the power gets shut off, even for a few minutes, the system gets disconnected from the app and needs to be reconfigured. When in the US, and system in Mexico, this has been a hassle. Trying to figure out how to get it to reconnect automatically.
I used your video when setting up mine wifi today: After i edited Interval Time then APPLY . The wifi disonnected and wifi module ligh is now solid green. I try reset it with a pin for 10 sec but nothing happens. Any ideas what I should do?
Johan de Swardt, South Africa : I have a off grid, single phase 10Kw Solar system, With 2x Growatt 5Kw SPE 5000 ES 6000W Invertors, connected parallel to each other. Do I need to perches one Growatt Wi-Fi Dongle for each inverter? Or only one, for my whole system? Thanks
Thank you for the video . had been stumped trying to reinstall the wifi device after upgrading & moving the smaller growatt to a different location . It just wouldnt connect to the wifi of the new location until now !!!! Thanks again
Great and useful video so thanks for that, one thing about logging interval, no matter how I try mine doesnt appear to allow me to enter anything less that every 5 minutes. Really would love some more granular data. Thanks
HOWdy R-2-V, Just got my GroWATT Data-Logger dongle on 11/23/2022 = no - No - NO CD-ROM included anymore ... YOU are lucky that you INVERTER plugs the DONGLE Front to Back /// mine plugs in Side-to-Side ... & with the tiny button ends up immediately adjacent to my 4/0 awg ( 0000 cable) battery input = dangerous 😞 I have no CELLULAR Telephone & it does not seem to my Amazon FIRE-HD10 TABLET thanks for your VIDEO COOP ...
@@Roll2Videos Success! Thanks to your vid and Ian's step by step instructions,otherwise it could've got messy lol. Now I just need to figure out what I'm looking at in the app but hard part is done,thanks again boss✌️
The update time interval won't stay after saving, if the inverter is turn off or batteries disconnect for a reason it will default back to 5 minutes it also specify (min) can you use decimal numbers such as .02 ?
I'm just trying to install the WiFi dongle. Unfortunately It looks like Growatt now want you to contact them for an 'Installer Code' in order to register your account. Which I will do, but no idea how long it will take to receive it though. It was a good video on the set up though.
@@Roll2Videos I'm in the UK, it turns out an Installer Code is mandatory whereas in the USA it isn't. I soon as I went onto the US Server, I could install it straight away! Thanks for your help.
Hello! Quick question... DId you have any sparks when you switched on the battery for the 1st time?? I havent turned on my inverter on yet cause i wanna be safe than sorry lol!!!!
The "add datalogger" option isn't there when I go to that website (I am in the USA). There's nothing between "add plant" and "add optimizer" showing for me. I created a "plant" but can't find anywhere to link it to my dongle. When I try in the app it says it can't connect to the server.
@@Roll2Videos thanks for the quick response! Yeah it is. It's showing up now. I'm guessing their login server was down or something. It looks different than it did a few hours ago and my datalogger is showing up in the system online at least though it isn't logging anything right now and says lost, as least it's further than it was :-)
My installer did the initial WiFi setup for me, so I didn't have the opportunity to update the Interval Time value. Is there any way to do this via the web dashboard, or directly to the inverter through some web interface? Or will I have to go back and put it in hot-spot mode again to get to those settings?
@@karllloyd6662 Thank you Karl, I will have to make another video on this topic. I will leave this one up incase someone who doesn't have the firmware update 👍
Very useful video. Has anyone had experience with an older unit (10yrs old)? I get stuck at the early stages because I cannot get the wifi dongle to go into connecting mode and get the blue light to appear at all. No problem re-setting (6 sec hold), but no blue light, no matter how long I hold the button.
Some installers suggest setting up a separate "Guest" account on the router for connecting the Growatt dongle and server for security reasons. What do you think?
what if the color on growatt wifi can't change? I've tried clicking it one time the result turns blue but it's not full, I tried clicking it again but it doesn't work. what is the solution for such problem?
Hey bro, I'm getting this error 'datalog already existed' My vendor didn't share with me the credentials he created, so I created a new account through the sign up in growatt , is there anyway to use same data logger?
Hi,I am having trouble connecting the growatt dongle wifi to growatt server. Kept on getting error messages cannot connect to server. You think because of my VPN?
It might be but I doubt it. If you are in North America and using the sever-us.growatt.com on the dongle and you vpn has you in North America as well it should work. Are you using sever-us.growatt.com in your web browser?
@@Roll2Videos Thanks for your replying, I didn't get that far. After resetting to the blue light, I type in my ip address I can't get to the shine website.
@@nodelayfordays8083 it’s not related to ur browser or any security settings in ur computer. It’s a company problem. Wait few days and try again. That what I did and magically worked smoothly. Btw I contacted the company via WhatsApp, I tried all their solutions but no one worked. I just appreciate their support and assistance. 😂
Yes,I did the same but instead of getting this blue screen that has the user and password, it is just giving the white screen that tells that I am not connected to the internet
@@thumbless66 You won't have to redo the wifi settings but you will need to push the button connect the computer through Wi-Fi type in the IP, change the intervals then click apply. it will reconnect to the internet.
Could you please repeat the password. I just started watching your video's and I am very excited to see more. I was looking for your video on connecting a power generator to the Growatt.
Today the password is growatt20220522 It changes everyday growatt(YEAR)(MONTH)(DAY) DO NOT reset to factory or wipe data OR do any updates. I'm on my 3rd dongle because I made these mistakes.
Also if you turn the inverter off over Wi-Fi you have to turn it back on over Wi-Fi the switch won't do anything to turn it back on FYI. that made me freak out one night lol
@@ryancacanindin8238 During setup I came across an issue where I picked ground out as an option and not home. That gave me the same issue. It's been over a year ago sorry I can't give you more information.
I'm having the same problem, I was able to "add" the datalogger but it is saying offline on the dashboard. I have deleted and re-added it about 10 times but still offline :(
Just getting ready to head out the door for work so without looking I'd say the easiest way is to deactivate your account with growatt and then re-register the account. I will try and get a better answer for you when I have a chance to look at the program. Thanks for asking
Recommended Store
Signature Solar: signaturesolar.com/?ref=Roll2
Thank you very much! Dongle is up and running!! 🙏 Blessing to you and yours.👍
You as well 😁
Thanks so much! This was fairly easy with your help. Beforehand I tried it unsuccessfully. Especially changing the mode to prioritizing the load being most economic (mostly from PV or battery directly) was my pain point. Keep it up!
Happy to help 😁
Thanks for the info, just to help, does that lives in (PR) do not choose Puerto Rico, my experience was no data, it will route you to the no US server, I change mine with a new registration using United Stated, and with the map locate my spot, that did the trick, got mine working.
Does this only work at home within your Wi-Fi signal or could I monitor this when I leave house on vacation? Thanks for the videos by the way.
You can connect this to your home wifi then connect anywhere in the world
Thanks a lot!!! I spend 2 days before unsuccesfully.
Glad I could help 😁
I finally got it to work. Sweet. Thanks for the video.
You're very welcome 😁
For the server domain, would I still want to change that I'd the system is in Mexico? And I want to view it from both Mexico but more importantly when I'm in the US?
The big issue I have is that when the power gets shut off, even for a few minutes, the system gets disconnected from the app and needs to be reconfigured. When in the US, and system in Mexico, this has been a hassle. Trying to figure out how to get it to reconnect automatically.
@@JD_49 I've never had the reconnect issue like that. I believe the -us is for Canada and the US (North America)
Great video. Best video on this topic. Thanks
I used your video when setting up mine wifi today: After i edited Interval Time then APPLY . The wifi disonnected and wifi module ligh is now solid green. I try reset it with a pin for 10 sec but nothing happens. Any ideas what I should do?
Working now. I was able to reset and redo.
Super! This is the best tutorial👌
Thank you!
Johan de Swardt, South Africa : I have a off grid, single phase 10Kw Solar system, With 2x Growatt 5Kw SPE 5000 ES 6000W Invertors, connected parallel to each other. Do I need to perches one Growatt Wi-Fi Dongle for each inverter? Or only one, for my whole system? Thanks
I would think you'd need two but I'm not totally sure.
Thank you for the video . had been stumped trying to reinstall the wifi device after upgrading & moving the smaller growatt to a different location . It just wouldnt connect to the wifi of the new location until now !!!! Thanks again
Your welcome! I'm glad to help.
@@Roll2Videos says it already exists everytime I try and add it to a new account
@@kingrichard7841 email grow Watts customer service. Anytime I've had an issue they've been able to fix it for me.
latam.service@growatt.com
Great and useful video so thanks for that, one thing about logging interval, no matter how I try mine doesnt appear to allow me to enter anything less that every 5 minutes. Really would love some more granular data. Thanks
HOWdy R-2-V,
Just got my GroWATT Data-Logger dongle on 11/23/2022 = no - No - NO CD-ROM included anymore ...
YOU are lucky that you INVERTER plugs the DONGLE Front to Back
/// mine plugs in Side-to-Side ... &
with the tiny button ends up immediately adjacent to my 4/0 awg ( 0000 cable) battery input = dangerous 😞
I have no CELLULAR Telephone & it does not seem to my Amazon FIRE-HD10 TABLET
thanks for your VIDEO
COOP
...
Going to be doing this today. Looks simple enough👍✌️
Good luck 😁
@@Roll2Videos Success! Thanks to your vid and Ian's step by step instructions,otherwise it could've got messy lol. Now I just need to figure out what I'm looking at in the app but hard part is done,thanks again boss✌️
@@scarygary3569 SWEET!!!
Compared to other inverters this is very overly complicated for doing such basic stuff
good job thank you for all your information that you provide keep on we are proud of you♥️♥️♥️
You're welcome 😁👍
If you activate the internet does that disable the blue tooth mode? Or does it work either or without any changes?
Unfortunately there is no Bluetooth mode on the growatt
The update time interval won't stay after saving, if the inverter is turn off or batteries disconnect for a reason it will default back to 5 minutes
it also specify (min) can you use decimal numbers such as .02 ?
When I set mine up, that's what I did.
Hey
I have GPRS Stick, all connected right. But when I trying to change some settings I need INSTALER CODE.... What is the installer code ? 🤔
I do not know. Sorry I can't help
I'm just trying to install the WiFi dongle. Unfortunately It looks like Growatt now want you to contact them for an 'Installer Code' in order to register your account. Which I will do, but no idea how long it will take to receive it though. It was a good video on the set up though.
Did you choose a residential or ground mount while setting up?
Residential or ground mount weren't options. I chose 'User', the other two options were installer or distributer.
@@michaeldibb ok, They will ask that when you set up you account on the Growatt website. Pick residential
@@Roll2Videos I'm in the UK, it turns out an Installer Code is mandatory whereas in the USA it isn't. I soon as I went onto the US Server, I could install it straight away! Thanks for your help.
@@michaeldibb 😁 awesome!
Hello! Quick question...
DId you have any sparks when you switched on the battery for the 1st time?? I havent turned on my inverter on yet cause i wanna be safe than sorry lol!!!!
Are you using Lithium batteries or lead acid?
@@Roll2Videos lithium ion.. it's a 48v bigbattery
@@PLATINUM2U I would use a resistor when making your battery connections I talk about this in my 3000w inverter review video at about 4:30 minutes
I have a growatt 3000w/48 in my rv ,If I install a Dongle on the Inverter will be able to monitor the inverter .I have no wifi in the RV
No, you would need to connect to a server. Check out my videos on solar assistant
The "add datalogger" option isn't there when I go to that website (I am in the USA). There's nothing between "add plant" and "add optimizer" showing for me. I created a "plant" but can't find anywhere to link it to my dongle. When I try in the app it says it can't connect to the server.
Is your web browser on sever-us.growatt.com?
Also when you made your plant did you pick residential plant? If you picked ground mount that's wrong
@@Roll2Videos thanks for the quick response! Yeah it is. It's showing up now. I'm guessing their login server was down or something. It looks different than it did a few hours ago and my datalogger is showing up in the system online at least though it isn't logging anything right now and says lost, as least it's further than it was :-)
@@chestnutplanter if you have your plant set as a ground mount it will not work. Maybe that's why it's not logging data.
My installer did the initial WiFi setup for me, so I didn't have the opportunity to update the Interval Time value. Is there any way to do this via the web dashboard, or directly to the inverter through some web interface? Or will I have to go back and put it in hot-spot mode again to get to those settings?
You'll have to go through hot spot mode. Don't worry it's easy. Just push the button and connect via IP address.
Just FYI, It seems that the website interface has been removed in a recent firmware update. You have to configure via the app now.
@@karllloyd6662 Thank you Karl, I will have to make another video on this topic. I will leave this one up incase someone who doesn't have the firmware update 👍
Very useful video. Has anyone had experience with an older unit (10yrs old)? I get stuck at the early stages because I cannot get the wifi dongle to go into connecting mode and get the blue light to appear at all. No problem re-setting (6 sec hold), but no blue light, no matter how long I hold the button.
Sorry, I'm not sure about that
Some installers suggest setting up a separate "Guest" account on the router for connecting the Growatt dongle and server for security reasons. What do you think?
Hm, I'm not sure. I don't see a issue with connecting normally but there is nothing wrong with extra security. I've never heard that because 🤔
Great job! Thank you Sir!
You're very welcome!
Key to safe, what is that nuber after growatt
You can see it at 4:45 in the video.
what if the color on growatt wifi can't change? I've tried clicking it one time the result turns blue but it's not full, I tried clicking it again but it doesn't work. what is the solution for such problem?
I believe when it changes to blue it's ready to be connected.
If not, try pressing and holding for 30 seconds.
Hey bro, I'm getting this error 'datalog already existed'
My vendor didn't share with me the credentials he created, so I created a new account through the sign up in growatt , is there anyway to use same data logger?
@@ja8268 Sorry, I'm not sure
What did you do to get data logger on your page, does not exist on mine amd keeps telling me I need to add a plant before i van do anything
Did you follow my video or are you just asking
@Roll2 Videos I followed it but didn't see where you added a plant, from what I understand the plant step could be skipped in the past
@@todamnbad did you try and add a ground mount or residential?
@@todamnbad server-us.growatt.com/login
@Roll2 Videos I was trying to stay away from entering more info then needed but it appears it can't be done
Hi,I am having trouble connecting the growatt dongle wifi to growatt server. Kept on getting error messages cannot connect to server. You think because of my VPN?
It might be but I doubt it. If you are in North America and using the sever-us.growatt.com on the dongle and you vpn has you in North America as well it should work. Are you using sever-us.growatt.com in your web browser?
@@Roll2Videos Thanks for your replying, I didn't get that far. After resetting to the blue light, I type in my ip address I can't get to the shine website.
Thank you Roll2,it's all good I got it working as designed!🙏🏽
Why graph showing in one brown color how to change
I'm not sure
I managed to add my datalogge finally thanks to this video but it still offline and showing no data! Any solution?
Did you use the proper web address?
What is the lowest updat time? 1 minute?
I have mine at 0.2, I'm guessing that's every 20 seconds
@@Roll2Videos 0.2 minutes is 12 seconds 😉
Life Saver. Thanks..
You're welcome 😁
Does anyone know the server address for the UK?
It's the regular server without the -US
Hello, when I try entre the dongle ip in browser I’m having a message saying connection is refused. Anyone got this message ?
I haven't had that happen. Maybe try a different browser
I'm having the same issue. Did you ever resolve it. The browsers like site can't be reached
@@nodelayfordays8083 it’s not related to ur browser or any security settings in ur computer. It’s a company problem. Wait few days and try again. That what I did and magically worked smoothly.
Btw I contacted the company via WhatsApp, I tried all their solutions but no one worked.
I just appreciate their support and assistance. 😂
Yes,I did the same but instead of getting this blue screen that has the user and password, it is just giving the white screen that tells that I am not connected to the internet
I'm not sure, you must have missed something. Sorry I can't help
I assume then that Growatt Invertors do not have build-in Wi-Fi communication abilities, like most of then other invertors?
You are correct
What happens if you made a account and you can't remember the username or password
I believe you can just start a new account and add the data logger to the new account
I'm having issues setting mine up it shows as a locked network and wants the wifi password.
Did you update the firmware? I had to buy a new dongle after I had updated my firmware.
@@Roll2Videos I figured it out when/if it ask for a wifi password you have to use the 12345678 as the wifi password.
@Roll2 Videos is there a way to change the refresh intervals through the dashboard? Or do I have to rest everything and start over.
@@thumbless66 You won't have to redo the wifi settings but you will need to push the button connect the computer through Wi-Fi type in the IP, change the intervals then click apply. it will reconnect to the internet.
Could you please repeat the password. I just started watching your video's and I am very excited to see more. I was looking for your video on connecting a power generator to the Growatt.
Generator hookup video is coming soon just a manual on generator. Which password are you looking for?
@@Roll2Videos the password to get into the administration in order to change some of the configuration settings
Today the password is growatt20220522 It changes everyday growatt(YEAR)(MONTH)(DAY) DO NOT reset to factory or wipe data OR do any updates. I'm on my 3rd dongle because I made these mistakes.
Also if you turn the inverter off over Wi-Fi you have to turn it back on over Wi-Fi the switch won't do anything to turn it back on FYI. that made me freak out one night lol
Anyone figure out what the server for uk is??
Yeah, I believe you leave out the "us" in the web address
It always gets no network connection when trying the IP on Google after i connect my wifi to the serial number.
Are you following the video or just asking a question
I have the datalogger already set up but it shows offline.
Try it again from the beginning
@@Roll2Videos already did for how many times and still says offline
@@ryancacanindin8238 During setup I came across an issue where I picked ground out as an option and not home. That gave me the same issue. It's been over a year ago sorry I can't give you more information.
I'm having the same problem, I was able to "add" the datalogger but it is saying offline on the dashboard. I have deleted and re-added it about 10 times but still offline :(
@@travish2127 did you register it as a residential or ground mount. You want to choose residential
HOW TO ADD MULTIPLE NO OF ID'S IN SINGLE ID........?
🤷
@@Roll2Videos I need solution sir.....?
@@RupeshKukde Sorry I can't help you
How do delete a plant which has entered by mistake?
Just getting ready to head out the door for work so without looking I'd say the easiest way is to deactivate your account with growatt and then re-register the account. I will try and get a better answer for you when I have a chance to look at the program. Thanks for asking
@@Roll2Videos how to deactivate the account ?? Any idea??
@@hammadakil9968 Yes under the settings menu you can remove you account or email the company.
Couldn’t find the pin hole on the dongle. Where is it located ?
Unless you have a different unit it's on the side that says growatt. There is a black circle with the word key next to it.
Click on the light button
@@apfarhat yep got it thank you ✌🏻
It's asking me for an installer code
You might need to email Growatt
What is hotspot pasword?
12345678