I’ve a query. I started my Pulsar 220 after over 2yrs. Since it didn’t start even after changing the spark plugs, the mechanic opened and cleaned the entire carburettor. Though the bike seems to be running fine, the RPM is fluctuating slightly ever since when at idle. My main issue is that the RPM rises to 2200 when the bike is at halt position in traffic and the throttle isn’t applied at all. Generally it should be at 1000-1100 RPM. Can you please tell what could be the exact cause of this problem? My mechanic said to replace the carburettor which I don’t want to as I feel it can be fixed without replacement. Would really appreciate your help.
The problem looks like maintenance issue, your carburettor type should be fuel injection. So only one screw will be available for rpm adjustment. However verify spark plug, air filter, air leakage in carbureter. Finally ask mechanic to change or remapping the ecm\ecu. Check one by one and change if required
I need help here.. I did the process just as you have explained here but when I turned the fuel screw clockwise it stuck at some point where the RPM lowered only to 2900 and I turned it anti clockwise and then it went to 3.5krpm and stayed constant and I reduced the rpm to 1.5.. question here is why wasn't I able to get 1k rpm when I turned the screw clock wise in the 2nd step is there any fault with my carburetor screw ?
Bro ennoda pulsar 150 bs4 model single disc complaint solran solve panna mudiyumanu parunga 1.Petrol 2 or 3 point tank la iruku aana petrol illama adacha epdi irukumo apdi iruku 2.petrol tank la canister ku pora hole la air aduchu clean pannitan same adaikurathu apdiye iruku 3.carpurator 2 or 3 time clean pannitan spark blug new change pannitan still apdiye iruku problem
Hi Bro nan 2020 model pulsar 150 std bs4 vaichu iruken enakku millege 43 than varuthu enna panrathu bro service centre la vittalum adjust panna time mattum than. Milege 55 varuthu other times 43 than varuthu ethavathu idea kodunga bro just 9000km thann run paniruken
I am owning a Bajaj Pulsar 150 , The RPM fluctuates a lot , it raises the acceleration Randomly (upto 4-5000Rpm) while riding as well as while the bike is in it's idling position . What to do bro ? Plzz do reply
Rpm மீட்டர் இல்லாத வண்டிக்கு எப்படிங்கண்ணா செட் செய்வது குறிப்பாக என் வண்டி yamaha saluto 125 cc எப்படி செய்வது என்று சொல்லுங்களேன் எனக்கு ஒரு சந்தேகம் நீங்கள் rpm ideal குறைத்துவிட்டு fuel லை அதிகமாக வைக்கிறிங்க இது எனக்கு புரியவில்லை தயவுசெய்து தெளிவாக தெரிவியுங்கள்
I have tried the same, even though am not getting constant idle position, I can see some fluctuations always in my pulsar 150. What could be the reason for the fluctuations.
When set using this method, if we open throttle air lock happens. Why ? Sometimes engine tends to shut down when throttle opened swiftly. How to rectify this.
താങ്കളുടെ തമിഴ് കേട്ട് മലയാളിയായ ഞാൻ എന്റെ പൾസർ -180 ട്യൂൺ ചെയ്തു (ningal tamil pesharath malayalam mathiri) tnks
Enthaaa abipraayam.....ok aaayooooo pleese tell me
Mileage ethra koodi Askar bro?
Ippo total ethra kittum
What is the reason to unscrew it fully to its last position?
Excellent, thanks
I’ve a query. I started my Pulsar 220 after over 2yrs. Since it didn’t start even after changing the spark plugs, the mechanic opened and cleaned the entire carburettor. Though the bike seems to be running fine, the RPM is fluctuating slightly ever since when at idle. My main issue is that the RPM rises to 2200 when the bike is at halt position in traffic and the throttle isn’t applied at all. Generally it should be at 1000-1100 RPM.
Can you please tell what could be the exact cause of this problem? My mechanic said to replace the carburettor which I don’t want to as I feel it can be fixed without replacement.
Would really appreciate your help.
The problem looks like maintenance issue, your carburettor type should be fuel injection. So only one screw will be available for rpm adjustment. However verify spark plug, air filter, air leakage in carbureter. Finally ask mechanic to change or remapping the ecm\ecu. Check one by one and change if required
Thanks bro, very useful
Spelendor plus bike old model. In carburetor setting பத்தி சொல்லூங்க Bro
Brother ippo performance mattum venum nu nenacha epdi adjust pannanum adikadi indha mari adjust pandradhu carburetor ku nallatha kettadha
Same doubt
Thanks and bro make a video on engine over heating problem
I need help here.. I did the process just as you have explained here but when I turned the fuel screw clockwise it stuck at some point where the RPM lowered only to 2900 and I turned it anti clockwise and then it went to 3.5krpm and stayed constant and I reduced the rpm to 1.5.. question here is why wasn't I able to get 1k rpm when I turned the screw clock wise in the 2nd step is there any fault with my carburetor screw ?
good and clear explain, but y full open fuel screw
TVS flame 125 cc bike ku epdi set pannanum video post pannunga
Honda cb unicorn tooning kattamudiyuma
Thanks this helps me
Bro ennoda pulsar 150 bs4 model single disc complaint solran solve panna mudiyumanu parunga
1.Petrol 2 or 3 point tank la iruku aana petrol illama adacha epdi irukumo apdi iruku
2.petrol tank la canister ku pora hole la air aduchu clean pannitan same adaikurathu apdiye iruku
3.carpurator 2 or 3 time clean pannitan spark blug new change pannitan still apdiye iruku problem
Rx100 milage setting sollunga bro yenoda bike la 18 km per liter bro please video podunga
Bro tvs xl 100 starting problem aa irrukku.
intha adjustment vacha correct aa run aaguma bro .
Hi Bro nan 2020 model pulsar 150 std bs4 vaichu iruken enakku millege 43 than varuthu enna panrathu bro service centre la vittalum adjust panna time mattum than. Milege 55 varuthu other times 43 than varuthu ethavathu idea kodunga bro just 9000km thann run paniruken
Bro avlodan mileage kodukuthu ithu bs4 bikela mileage avlodan tharuthu nan 50 expect pani vangunen ipo 40 thararhr periya visyama iruku old pulsar bikes gives better mileage bro
1.5 adjust
How many times do you turned the fuel screw from starting position ?
Keen whatch again, 11 turns, that is 5 full turns and 1 half turn.
@@suriyanarayananb7078which bike bro ??
I am owning a Bajaj Pulsar 150 , The RPM fluctuates a lot , it raises the acceleration Randomly (upto 4-5000Rpm) while riding as well as while the bike is in it's idling position . What to do bro ? Plzz do reply
Same problem any solution ??
air diaphragm and needle issue .. It will be very dangerous in the heavy traffic
This method doesn't work in 150 , i tried.. Just turn 2 full rounds which is company default and you will be good to go
@@tarunsharma5254 what mileage are you getting after 2 turns?
Pulsar 220 ku apdi adjustment panna millage kidaikuma bro
Bro na maximum rpm la set pannite
Irunthalum apo apo milage kammiya kudukkuthu ennoda bike pulsar 150
CV procedure.
I turned my carb, it's highest rpm set at 12 half turns is correct or rich mixture? Please reply.
Royal enfiled 350 classic bs4 carburetor settings பத்தி கொஞ்சம் சொல்லுங்க மைலேஜ் 30 தான் கிடைக்கிறது
How to increase bike trottl response
Gee naa hero xtreme sports bike vachirukka adhula ideal screw mattu thaa irukku fuel screw illa vera eppadi adjust panradhu
Hero xtream fuel injection carburettor
Old model carburettor gee
Hi,
I have a doubt.
For a better mileage can we set idle engine rpm to less than 1000 ?
Your engine will.stop if the rpm is below 1000
Thanks Deepak
No, this is worng.
How in bajaj discover 150 model 2012
Company ni bola tha 2 or 2.5 round ghumao aachha ho jayaga so which is true please explain me i have pulsar 180 bike
Thanks brother
Suzuki mx 100 bick கார்புரேட்டர் மைலேஜ் அட்ஜஸ்ட்மெண்ட் எப்படி என்று கொஞ்சம் வீடியோ போடுங்க அண்ணா Please
That is ordinary carburetor, so, turn 1.5 turns counter clock wise, from fully close position.
can i do the same to a 180?
Did u done?
from tight it should be 2 to 2.5 turns to gain approximately 40 to 42 kmpl
Bro pulsar150 twin disc reserve capacity yevlo bro?
Sir your bike is BS 3 or BS 4? I can see SAI intake pipe near carburetor. And at how many turns you got balanced carb setting?
Almost 3 full turn. It differs every vehicle
Always keep accurate air flow otherwise cause engine damage or loss consistency power
Rpm மீட்டர் இல்லாத வண்டிக்கு எப்படிங்கண்ணா செட் செய்வது குறிப்பாக என் வண்டி yamaha saluto 125 cc எப்படி செய்வது என்று சொல்லுங்களேன் எனக்கு ஒரு சந்தேகம் நீங்கள் rpm ideal குறைத்துவிட்டு fuel லை அதிகமாக வைக்கிறிங்க இது எனக்கு புரியவில்லை தயவுசெய்து தெளிவாக தெரிவியுங்கள்
Anna enku rpm koraiyvae matuku ena pandrathu rise agithae poguthu
Argent Rply me fast
same yenaku apadidan oru pointla high rise agum antha pointla fix panikonga bro
I have tried the same, even though am not getting constant idle position, I can see some fluctuations always in my pulsar 150. What could be the reason for the fluctuations.
Saravanan Narayanasamy check air filter, spark plug engine oil. If there an issue just change it. Still your issue remains need to change the CDI
@@RKHOTPISTON Thank you so much for your reply. Your video is really helpful. Thanks again.
Saravanan Narayanasamy b
Bro ippadi milage adjustment panna engine la edhavadhu damage aagumma illa ippadi milage adjustment pandradhalla any disadvantage irrukka
This is the procedure, for CV carburetor, or set the company setting. After a week riding, u have to check the spark plug.if, it's optimum colour.
Tq
Super bro
Bro ithu apache 1604v ku set aagumaa???
👍
Pulser 180 how much maleage for 1 liter
40 to 42 kpml
Bro can you do a video on gixxer bike bs4 version
2 - 2&1/4 best setting.
When set using this method, if we open throttle air lock happens. Why ? Sometimes engine tends to shut down when throttle opened swiftly. How to rectify this.
Increase rpm with rpm screw
Clean full carburettor using petrol. Set rpm 1400 +100/-100
Ithu vera maathiri irukku vera video parthen athula vera maathiri sonnaar
Bro royal enfield carburator tuning podungo pls
Nice
if you do emission test, this carb setting will surely fail. bacause i also done setting like this. my bike got failed in first emission test.
Then what's ur choice
Bro bike abnormal ah rise aguthu
Idel ah irutha running la iruku rise panni vuta off aguthu
ena pannurathu
check your accelerater cable and chock cable.......
Tvs super xl heavy duty mileage adjustment sollunga please
bro i hav pulsar 220 intha technique en bike ku set akuma bro yena en bike 34 than kidaikuthu so i need to increase my bike milege bro
kishore kishore yes this technique for all bikes except FI
bro nan try panen but 2 kms than increase Kiruku bro avlo than increase akuma illana approximatea evlOK kidaikum bro
kishore kishore hj
Epdi bro rpm 3000 vanthudunu kandupidicheenga
Clock wise_ more air not more fuel
do for yamaha fzs v1
Bro ippadi vachha evvalavu mileag varum.....
paiza pay 55 - 60 kmpl based on adjustment
paiza pay can tune more mileage and average performance
2 - 2.5 full turns default setting
Ella bikekum ithu marithana bro
No, this procedure is only CV carburetor, so, turns should be bike to bike, .in old model carburetor u can turn 1 to 1.5 turns, .
👌
but nice video
Nobody prooved the mileage after setting the carburettor
thalaiva its not ideal speed idle speed
why carburator setting is set at 3000 rpm ??? any reasons.???
Fazil Creator so that we easily detect the high rpm that we want
Bhai apne 3000 rpm kiya fir mixer ko set kiya to uske baad bhi 3000 rpm tha
Angad singh gorakhpuriya i already set once. If you try first time it will go up more than 3000RPM
Sir plz make this video again in english or hindi language..
Mohd Zaid definitely. Thanks for watching. Please subscribe
Athu fuel scruw illa air scruw
Fuel +air mixture
220f bs4 turn default
Idle not constant 220f bs4 new bike buy 2 month what is prblm
This this is not full information
Hindi me bolo