This guy knows his shit 100% I called Holly but I didn’t have spark guy told me I had a bad coil I went back to the video this guy hands-down knows his shit thank you so much big big help
The 6AL tach output wire is GRAY not brown and seems to not be necessary unless running a tach outside the Holley EFI. Its unclear what tach output should be used, I assume its the tach output from the CD box as it was recommended to wire per the CD box instructions.
I wish in those scenarios he would also go into the different types of factory tachometers and how to get the different models like a Ford factory tach when running a MSD Pro Billet magnetic distributor to operate and what the correct tach adapter is utilized with which type systems.Theres also different types of aftermarket tachs too analog and digital high speed stepper ..
Also in his directions he states to set the distributor 15* advanced btdc.If still using the HEI distributor w/module I think its more like 10*.. The magnetic pickup and reluctor blade on a MSD magnetic pickup distributor must be referenced between 45-60 degrees...Not 15*.......15* is used as a static reference angle to verify that timing is correct between the balancer and the ECU..........
So you can do timing control with a CD box and magnetic pickup? Does the distributor need to be unlocked? I have a professional products distributor and CD box it’s a magnetic output distributor and I have it locked out currently. It does not have an adjustable rotor. And I don’t think they make one for that distributor.
If im running a non timing control setup(coil negative) using a GM style HEI distributor that has a vacuum cannister, do I connect the vacuum cannister or do I plug it?
Can the Sniper or Atomic 2 systems be combined with the MSD Ignition Direct Ignition System (DIS) Kit Small Block Chevy, Big Block Chevy - Black Part Number: 121-601513?
This guy knows his shit 100% I called Holly but I didn’t have spark guy told me I had a bad coil I went back to the video this guy hands-down knows his shit thank you so much big big help
Best post by anyone giving guidance on the Holley Sniper.
The 6AL tach output wire is GRAY not brown and seems to not be necessary unless running a tach outside the Holley EFI. Its unclear what tach output should be used, I assume its the tach output from the CD box as it was recommended to wire per the CD box instructions.
Msd 6efi with dual sync paired with my sniper. Runs great
its unclear when im using magnetic distributor with cd box , should i lock distributor or no
I wish in those scenarios he would also go into the different types of factory tachometers and how to get the different models like a Ford factory tach when running a MSD Pro Billet magnetic distributor to operate and what the correct tach adapter is utilized with which type systems.Theres also different types of aftermarket tachs too analog and digital high speed stepper ..
Also in his directions he states to set the distributor 15* advanced btdc.If still using the HEI distributor w/module I think its more like 10*..
The magnetic pickup and reluctor blade on a MSD magnetic pickup distributor must be referenced between 45-60 degrees...Not 15*.......15* is used as a static reference angle to verify that timing is correct between the balancer and the ECU..........
I'm planning to replace the standard efi on my 1992 ford mustang, will I need to change the distributor and coil?
Good video
So you can do timing control with a CD box and magnetic pickup? Does the distributor need to be unlocked? I have a professional products distributor and CD box it’s a magnetic output distributor and I have it locked out currently. It does not have an adjustable rotor. And I don’t think they make one for that distributor.
You need a phased rotor for timing control .
The distributer does not need to be locked out for timing control with 6al box?
So can you run sniper with stock hei ? I thought he was saying you could then went on to say a distributor that’s not locked out can cause damage
If im running a non timing control setup(coil negative) using a GM style HEI distributor that has a vacuum cannister, do I connect the vacuum cannister or do I plug it?
Can the Sniper or Atomic 2 systems be combined with the MSD Ignition Direct Ignition System (DIS) Kit Small Block Chevy, Big Block Chevy - Black
Part Number: 121-601513?
Does this apply to the new sniper 2?
Can I control the timing using my 8360 distributor if I lock out the vacuum advance and install the adjustable rotor?
Are the issues fixed? Wanting to try this but don’t want to go through what everyone has on the past
I have had 2 in three ears, first one started running real rough, Holley replaced, 2nd one lasted ten months and completelly quit
I need it to work with my MSD grid !!
Awesome
i have install my sniper but my hand held screen does not light up i can barely see the icons but bt enough to do any tuning anybody know a solution ?
You might want to go to the FaceBook page for Holley Sniper and ask the group. I usually get quick, good advice from the members
What's a good ignition box for a sync cam with a sniper EFI carb for coil per plug.