How to Tune your Car Audio (DSP)

Поделиться
HTML-код
  • Опубликовано: 27 авг 2024
  • Watch as Zodi gives you a step-by-step walkthrough on how to tune an Nakamichi Digital Sound Processor (DSP) key functions and features and how to operate it to provide the best sound experience in your vehicle.
    *FAIR USE*
    Copyright Disclaimer under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education and research.
    Fair use is a use permitted by copyright statute that might otherwise be infringing.
    Non-profit, educational or personal use tips the balance in favor of fair use.
    ------------------------------------
    projecttorque.in
    Facebook - / trq.in
    Twitter - / trq.in
    Instagram - / trq.in
    Telegram - t.me/trq.in
    WhatsApp -
    #caraudio ​​​ #nakamichi ​​​ #DSP #carlifestyle

Комментарии • 49

  • @mohammedsalman-hp6iz
    @mohammedsalman-hp6iz Год назад +1

    even nakamichi wouldn't explained in detailed ur video is very detailed learned many things thanks for in depth ......

  • @adko.5586
    @adko.5586 Год назад +1

    Amazing explanation. Very thorough, keep up the good work!

  • @ajju0045
    @ajju0045 Месяц назад

    Kindly make video on harmony dsp charloe 46 adsp

  • @akramaslam
    @akramaslam Год назад

    Great job man! Very well explained! Thank you for such a patient and detailed video! 👍🏻

  • @janibh
    @janibh Месяц назад

    Hello Sir, Sounds great.
    But, how to tune with HELIX DSP.
    Hope you update.
    Thank you.

  • @shyamtiwari6187
    @shyamtiwari6187 9 месяцев назад

    Great Sir,
    Almost 95% in am clear

  • @krishnaba8181
    @krishnaba8181 Год назад

    Respected sir, you explained very neatly by viewing you video, i will install DSP sir, in next video you explain installation wiring sir

  • @AudioBull_Chennai
    @AudioBull_Chennai Год назад

    Nicely explained dude 😊 thanks much. Esp this content is able to understand only who play around the audio waves and frequencies! Good job 👌

  • @karthikkesavan1
    @karthikkesavan1 7 месяцев назад

    Awesome explanation 👍

  • @rajkumarsteel
    @rajkumarsteel 3 месяца назад

    Use delay in inches and actually measure the distance from speaker to your ear, left and right. It’s v v simple

  • @venkateshvkh6135
    @venkateshvkh6135 6 месяцев назад

    Super explanation very thanks 👍

  • @ninanjohn1994
    @ninanjohn1994 3 месяца назад

    How to set a delay for the subwoofer if it is fixed in the trunk? Does that speaker have more delay at the initial time? Should I delay all the speakers to let the sound wave from the sub reach my ear? Please tell brother

  • @Inimigodogogn
    @Inimigodogogn 3 месяца назад

    Even for under seat sub we can use the other 2 left out channels right brother ?

  • @rohanobhan5153
    @rohanobhan5153 Год назад

    Superb Also u should play some demo also in ur videos

  • @godknws23
    @godknws23 Год назад

    Thank you Soo much Sir. I have few questions.
    1. If I am pairing this with my stock head Unit (Honda Amaze vx) do we need a Hi/lo converter??
    2. Do we need a separate Amplifier? I am only swapping my stock speakers for components 2 pairs.

  • @superclips4329
    @superclips4329 10 месяцев назад

    Those filter pass values for speakers - You mentioned to look at the instruction manual. Will setting incorrect values blow up the speakers? Especially the mid ranges and tweeters?

  • @torqueabhi_
    @torqueabhi_ Год назад

    That is a very detailed explanation. I got the NDSK4285AU with Audioson Prima APK 165 component with APX165 coax with Sound Magus app for my Hyryder Hybrid G. I am gonna play with the settings & see how it goes. One question, I have, is there a quality difference if I chose Apple CarPlay or stream music on the DSP Unit? Thanks

  • @solankironak
    @solankironak 2 месяца назад

    I am really stuck with my dsp 4185
    I am literally able to listen vocals out of my woofer
    I have 1600 watts pioneer mono amp and 1000 watts sony woofer
    Please help
    Or is there any way i can contact you .
    Thankyou

  • @basashanker1965
    @basashanker1965 Год назад

    Delay setting, we delay the closest speakers channel with respect to another side. Every millisecond delay corresponds to 1 feet /30 cms distance difference between ears and two speakers in question

  • @niteshchand3760
    @niteshchand3760 6 месяцев назад

    What is the output of dsp/amp at 4 ohm

  • @harshilpatel8664
    @harshilpatel8664 Год назад +1

    Hi
    Need a help
    I am planning to buy NDSK4185AU
    Can i connect my factory speakers directly on this dsp without any external amplifier?
    If i can then how much output rms is per channel in this dsp for speakers.

    • @funlife009
      @funlife009 Год назад

      @harshilpatel8664 did you install even I got similar plan.

  • @ruatpuiapuia4039
    @ruatpuiapuia4039 Год назад

    Can you explain the tuning of audison bit ten,i think most of your subscriber would eager to know as audison bit ten is most prefer among dsp

  • @AtulKumar-ep9cw
    @AtulKumar-ep9cw Год назад

    Dont we need RTA for setting up n checking the peaks n drops of various freqencies to get the linear graph?

  • @degatube
    @degatube Год назад

    Hi. Are u using a four channel amp after the dsp? Or direct from dsp to the 4 door speakers?

  • @faridsmart5214
    @faridsmart5214 Год назад

    Hi. Can this unit be used to defeat bass roll off in OEM systems? I own an Audi and added a subwoofer, but the bass rolls off as i increase the volume. Any settings to defeat this?

  • @xtremegenerationjack
    @xtremegenerationjack 11 месяцев назад

    How do you set the delay accurately? Asking as these are pretty accurate measurements. I have the same dsp in mine too. Will a rta/measurement mic help someone in getting that value? Kindly reply. TIA! Great video BTW 👐

    • @rickeydeen5919
      @rickeydeen5919 11 месяцев назад

      Heyy how is ur nakamichi dsp working is there any problems what's the sound quality like

    • @xtremegenerationjack
      @xtremegenerationjack 11 месяцев назад

      @@rickeydeen5919 It's a brilliant DSP. the best upgrade I could make for my audio system. Go for it

  • @degatube
    @degatube Год назад

    Hi. What's the difference between nakamichi 4065au vs 4165au?

  • @ejiebolivar7736
    @ejiebolivar7736 7 месяцев назад

    hi can you give me idea how to set tweeter on my dsp

  • @chandralegathalamaran630
    @chandralegathalamaran630 10 месяцев назад

    For sub setting frequency?

  • @rohityurembam8960
    @rohityurembam8960 10 месяцев назад

    pc software available is working plz share link

  • @lastnamearya
    @lastnamearya Год назад

    Can we get surround sound (theatre like) effect with this DSP?

    • @luffyking3513
      @luffyking3513 8 месяцев назад

      You need more mid bass and tweeters

  • @badrealamhakeem2083
    @badrealamhakeem2083 Год назад

    I want to tune my musway dsp.. can u guide me how to tune it with passive crossover..

    • @projecttorque6225
      @projecttorque6225  Год назад

      Hello there! The concept is pretty much the same. I’d be honest mine don’t have passive crossovers ergo don’t want to guide incorrectly. Although planning for an upgrade soon. Stay tuned for a walkthrough!

    • @badrealamhakeem2083
      @badrealamhakeem2083 10 дней назад

      Still not satisfied with the tunning

  • @basashanker1965
    @basashanker1965 Год назад

    If sub is in back then we delay other channels by distance difference from sub of each speaker. Every foot one millisec. We cannot add delay to far speakers. We delay closer speakers to far speakers so all reach at same time at crossover points when sound comes from both speakers

  • @Deadpool-jy2pv
    @Deadpool-jy2pv Год назад

    Bro please tell the price of this DSP from where u bought !

    • @projecttorque6225
      @projecttorque6225  Год назад

      Thank you for your comment! Feel free to check out Nakamichi’s website for your local dealership options and costs.

    • @akshayrajput6791
      @akshayrajput6791 Год назад

      11000

  • @chandreshkarkera
    @chandreshkarkera 2 года назад

    Dude can u tune my car system. Were are u based. I m from Mumbai

    • @projecttorque6225
      @projecttorque6225  Год назад

      I’d love to say yes but it is nearly impossible to tune a DSP virtually without listening to how it sounds
      live. Also, it would depend on how you find your music listening to be. So pretty much bespoke for each person.

    • @ramie2400
      @ramie2400 Год назад

      U can connect with sound factor pro, Mumbai.

  • @Mayankjha_youtube
    @Mayankjha_youtube 2 года назад

    Can you help me to tune up my nds4831dsp nakamichi by remote access

    • @projecttorque6225
      @projecttorque6225  Год назад +1

      I’m afraid I wouldn’t be able to do justice if I tune it virtually without actually listening to the output real time. Feel free to just learn how to use the tuner and tweaking it according to your listening pleasure.