I just went to the birthday party section of walmart and bought a 97 cent white table cover and thumb tacks and it works fine for a wall that had a window in the way.
Really like this series,keep it up! Can you do a video about proper design for screen brightness while designing for best possible black levels? What screen brightness do you guys design for?
it really depends. Elite Screens is a great place to start, they've got a handful of options specifically for outdoor use. And of course Screen Innovations , although they'll be more expensive. Both are good options. It depends on the weather conditions, if it's rear or front, or both? But Elite is probably where I would start your search.
The essence of this content is intellectually rich. A book with akin messages was a journey of great insight. "A Life Unplugged: Reclaiming Reality in a Digital Age" by Theodore Blaze
Tym is crazy! yes you are! Your video tooooo informative and its practical my friend! loved it as usual. following you for my bread and butter. thanks!!!!
I am feeling like a home cinema expert after watching your several videos. Thanks for explaining in such detail. Just one request. Try to use a white board instead of those papers. Because the paper are huge and i think they just to waste after your video shooting. Thanks and all the best
Q: Can you opt for a 2:35:1 2-way screen? Or, opt for a 16:9 2-way? Or are all 2-way and 4-way based off of 16:9 screens? Also, do all projectors today have memory settings for said addict ratio? So that we can jump into HD from watching a movie in cinescope with one button press? So we won't have resize each time?
If you wanted to avoid an acoustically transparent screen but also have ideal audio for multiple rows of seating, would you recommend placing the center channel above the screen and tilting it down or below the screen and tilting it up?
He said "We're gonna skip the math" immediately right after he says "let's run the math" 8:19 lol great content tho been looking for a good video trying to buy a screen projector. This helped a lot
Just bought a short throw projector (Optoma GT1080HDR ) its gonna be ceiling mounted , gonna have a dedicated space for it , have already installed blackout curtains , what projection screen could you recommend , anything in the range of 80 inches , any help will be greatly appreciated .
Hello! I've notice that sometimes I watch a movie and I get those black bars on my projector screen 16:9. But sometimes the screen is fully projected. Like in back to the future. So, if I watch a movie like back to the future in a 2:35 screen, what will it happens? Thanks!
I recently purchased an Optoma UHD50X 4K projector to accommodate my PlayStation 5 for 4K gaming. I’ve spent countless hours searching online for a projector screen that will be large enough to cover the entire living room wall if possible, and I need any expert opinions on which side screen I could purchase. My dimensions are L: 174 x W: 94, Diagonal: 194. I’ve owned an Epson 8350 for 10 years, but never made a major screen purchase. Not so much concerned with the brand as I am with covering as much of the wall as possible to get the most out of my purchases. Any assistance would be greatly appreciated. Thank you.
Great video! Question; what projector do you need to get a 2:35 screen. Could you adjust any projector to fit wide format, black bars outside the screen? Do you loose sharpness, when going for 2:35?
Thats why i went 16.9 over 2.25 As some movies are still 16.9 and imax is different resolution. I can put up with the black bars, i cant put up with parts of the image being stretched or cut out
hi I have white screen at the moment and noticed that the projector is showing a white glow from the screen but the colours also stand out just the glow.like there is to much white in my room I also have bright white walls and i think the projector reflects from them too so to even out the contrast would it be best to get the grey screen.
@@SmartHomeBrothers OK been looking at diy paint what do u recommend my budget is any under £50 that I can put on a MDF board that has good contrast levels. unless you can recommend good quality grey screen I can put over a wooden frame.
Hi Tym, I seen your some od the videos, which provides me lot much information. Can you provide me some material to refer for the calculation for the Theaters, like speakers woofer and amplifier selection and It's Installation along with calibration?
Hey! Looking to install a projector screen in the middle of my apartment. Are all screens dual screens? As in, if I’m watching from one side of the apartment, would it also play on the opposite side of the screen on the other side?
Hello I got the epson eh-tw650 i replace my tv with it so I'm projecting on my white wall and the quality it's quiet impressive im wondering if i got a screen will it improve the quality of the pictures? I see some 4k screen and some simple fhd screen which one should I go for it to see a big difference yes will get a 4k projector with time because I like playing my game on big screen
Great video! If my room is dimensioned 155" x 92 ", how do I go about choosing a screen? I am thinking a 2.35:1 and go as wide as possible, and for 16 x 9 content, i'll plan to have curtains to cover the black vertical bars. Is that a good strategy?
2 question....what happen if my screen has a high gain that is over 22' Lambert? And what if i angle up the center speaker to ear level, is that the same?
Richard Dias has to ask my engineers :) they said technically the answer is yes, if you got out your light meter you would detect it, but on a normal screen ( a non ambient light reflecting screen) it’s unlikely you’d notice a difference. That’s not to say the image on the screen isn’t impacted but the light reflection you probably wouldn’t notice. If it was an ambient light rejecting screen, it would have an effect for sure
Ok, might be a stupid question. If you don't purchase a screen but you rather project it straight onto the wall, can't you have best of both worlds? That is, if there exist some super good paint of course :p
Link to good article that explains it but has easy 3 steps at bottom of article to help you calculate - from people I’ve spoken to, most agree today that the ideal luminance is higher than smpte recommendation of 16. But... that’s the current recommendation www.residentialsystems.com/blogs/1156
While darker colors in a low sheen are preferred, they don't have to be absolute black. Grays are popular...and our former showroom theater had purple walls.
in fact, any colors you like but those can reflect too much light, such as white, golden, since the bright color enviroment will influence your viewing experience.
Can you have too many foot Lamberts? My projector is a Epson home cinema 2150, so 2500 lumens. Square footage of my screen is 25.84 ft squared. So I have 96.7 foot lamberts. I haven't bought a screen yet. Should I try to get one with lower gain? Or is a gain of 1.1 ok?
of course you should buy one, if projecting to your wall, the image may be very unclear and very easy to harm your eyes, if in a darm room, you just chooose one common screen, if much light in your room, you should choose one light-rejecting screen. if you have more interests on it, you can add my whatsapp , or email to me
LOL - would be easier for sure. Was a way to make movies new and exciting at a time when they were anxious to get people back to the Movies. But now, it's a very popular format, so not going away any time soon.
Projector anamorphic lens are pretty neat but expensive. Some 2.35:1 screen users uses that anamorphic lens. It'll retain the aspect ratio and turn 16x9 aspect ratio into 2.35 without losing pixels and brightness.
Excellent excellent vid. Concise, relevant, interesting and extremely well presented. Huge achievement considering the length
Thanks Sir very informative. It solved the puzzle even my home theater advisor doesn’t know. So I am getting 125 inches screen (2.35 ratio). Thanks 🙏
Glad it helped
I just went to the birthday party section of walmart and bought a 97 cent white table cover and thumb tacks and it works fine for a wall that had a window in the way.
@vicdamone You could also use your wife/partners backside but again, it's not optimal
@@cyberBIGGT hahahahah 🤣😂
Hey! I love your channel man! I'm currently working on a 120" theater room!
Thanks man, appreciate the support. Let us know how the Theater room comes along!
Really like this series,keep it up! Can you do a video about proper design for screen brightness while designing for best possible black levels? What screen brightness do you guys design for?
Absolutely amazing video. I learned a lot. Keep up the good work.
This guy make it so easy, love his deliveries 😊😊
What are your thoughts for an outside screen?
it really depends. Elite Screens is a great place to start, they've got a handful of options specifically for outdoor use. And of course Screen Innovations , although they'll be more expensive. Both are good options. It depends on the weather conditions, if it's rear or front, or both? But Elite is probably where I would start your search.
The essence of this content is intellectually rich. A book with akin messages was a journey of great insight. "A Life Unplugged: Reclaiming Reality in a Digital Age" by Theodore Blaze
Thank you
Tym is crazy! yes you are! Your video tooooo informative and its practical my friend! loved it as usual. following you for my bread and butter. thanks!!!!
Thanks my friend! Appreciate the support
Great info...simple and easy to understand broad coverage!
thanks for the information
Thanks. Lots of really essential information for choosing a screen and even a projector.
Thank you very much! I’m a movie geek so I’m gonna get 2:35. Thank you again!
Very helpful...Thank you! Do you have any video on an outdoor theater system? If not, can you suggest a resource?
Really like the video, everything on point and neatly summarized.
Thank you 😎
The "news" should NEVER be larger than "Star Wars"! :)
I am feeling like a home cinema expert after watching your several videos. Thanks for explaining in such detail.
Just one request. Try to use a white board instead of those papers. Because the paper are huge and i think they just to waste after your video shooting. Thanks and all the best
Q: Can you opt for a 2:35:1 2-way screen? Or, opt for a 16:9 2-way? Or are all 2-way and 4-way based off of 16:9 screens?
Also, do all projectors today have memory settings for said addict ratio? So that we can jump into HD from watching a movie in cinescope with one button press? So we won't have resize each time?
I usually pick 16:9 my personal preference and it's probably common for alot of people what size do you guy's use?💯🤔
If you wanted to avoid an acoustically transparent screen but also have ideal audio for multiple rows of seating, would you recommend placing the center channel above the screen and tilting it down or below the screen and tilting it up?
how about the main speakers installed at front bottom or front top and some surround speakers installed at left&right&back walls
Great content but...the ratio is 2.35:1 not 2:35
yes, if home theater, 2.35:1 is the best option, if just for living room or wedding room or company's meeting room, 16:9 is OK
How do this change for UST projectors?
Thanks brovsuoerb video
What I mainly game? Is it like movies or?
He said "We're gonna skip the math" immediately right after he says "let's run the math" 8:19 lol great content tho been looking for a good video trying to buy a screen projector. This helped a lot
I wish you'd go into white/grey/black screens. Otherwise a nice video!
Just bought a short throw projector (Optoma GT1080HDR ) its gonna be ceiling mounted , gonna have a dedicated space for it , have already installed blackout curtains , what projection screen could you recommend , anything in the range of 80 inches , any help will be greatly appreciated .
Hey, what project would you recommend under $300???
Hello!
I've notice that sometimes I watch a movie and I get those black bars on my projector screen 16:9. But sometimes the screen is fully projected. Like in back to the future. So, if I watch a movie like back to the future in a 2:35 screen, what will it happens?
Thanks!
I got a 4K projector on a 120” screen, all I can say is do it people!
Congratulations! 🍿😎
Thanks magic Mike
I recently purchased an Optoma UHD50X 4K projector to accommodate my PlayStation 5 for 4K gaming. I’ve spent countless hours searching online for a projector screen that will be large enough to cover the entire living room wall if possible, and I need any expert opinions on which side screen I could purchase. My dimensions are L: 174 x W: 94, Diagonal: 194. I’ve owned an Epson 8350 for 10 years, but never made a major screen purchase. Not so much concerned with the brand as I am with covering as much of the wall as possible to get the most out of my purchases. Any assistance would be greatly appreciated. Thank you.
Great video!
Question; what projector do you need to get a 2:35 screen. Could you adjust any projector to fit wide format, black bars outside the screen? Do you loose sharpness, when going for 2:35?
Always go 16:9. If you go 2.39:1, when you watch 4:3 films, it'll be so tiny.
GREAT INFORMATIVE VIDEO? WHAT SIZE SCREEN WOULD RECOMMEND FOR VIDEO GAMES?
So sould I get a projector first & then the screen or screen first & then projector?? The max size I want to go is 100"
Do you see the Cinema scope going to 2:40 due to increasing IMAX presence in Home theater?
Thats why i went 16.9 over 2.25
As some movies are still 16.9 and imax is different resolution. I can put up with the black bars, i cant put up with parts of the image being stretched or cut out
hi I have white screen at the moment and noticed that the projector is showing a white glow from the screen but the colours also stand out just the glow.like there is to much white in my room I also have bright white walls and i think the projector reflects from them too so to even out the contrast would it be best to get the grey screen.
definitely think it could help
@@SmartHomeBrothers OK been looking at diy paint what do u recommend my budget is any under £50 that I can put on a MDF board that has good contrast levels. unless you can recommend good quality grey screen I can put over a wooden frame.
Hi Tym, I seen your some od the videos, which provides me lot much information. Can you provide me some material to refer for the calculation for the Theaters, like speakers woofer and amplifier selection and It's Installation along with calibration?
Hey! Looking to install a projector screen in the middle of my apartment. Are all screens dual screens? As in, if I’m watching from one side of the apartment, would it also play on the opposite side of the screen on the other side?
Thanks for the amazingly informative vid! P.S. You're super handsome!
Great video.
For 100” diagonal screen, what size do you suggest to mount from floor to the lower screen?
Hello I got the epson eh-tw650 i replace my tv with it so I'm projecting on my white wall and the quality it's quiet impressive im wondering if i got a screen will it improve the quality of the pictures? I see some 4k screen and some simple fhd screen which one should I go for it to see a big difference yes will get a 4k projector with time because I like playing my game on big screen
What's a good screen for the Vankyo leisure 3 mini projector?
if you want to use a projector for gaming on a curved screen (racing simulator) what should I use?
Great video! If my room is dimensioned 155" x 92 ", how do I go about choosing a screen? I am thinking a 2.35:1 and go as wide as possible, and for 16 x 9 content, i'll plan to have curtains to cover the black vertical bars. Is that a good strategy?
2 question....what happen if my screen has a high gain that is over 22' Lambert?
And what if i angle up the center speaker to ear level, is that the same?
16.9 panoramic
How would you fit a big center channel behind a screen that's up against the wall?
You gotta put it in the wall.
What would you suggest for gaming from Xbox one?
do projectors offer different aspect ratios?
what ratio is best for Playstation games?
If my projector is off center, do I also have to worry about light being reflected back at an suboptimal angle?
Richard Dias has to ask my engineers :) they said technically the answer is yes, if you got out your light meter you would detect it, but on a normal screen ( a non ambient light reflecting screen) it’s unlikely you’d notice a difference. That’s not to say the image on the screen isn’t impacted but the light reflection you probably wouldn’t notice.
If it was an ambient light rejecting screen, it would have an effect for sure
who are the 12 idiots that hit dislike? This video was brilliant !!
Thanks my friend!
great !
Ok, might be a stupid question. If you don't purchase a screen but you rather project it straight onto the wall, can't you have best of both worlds? That is, if there exist some super good paint of course :p
No 4:3 screen option!
How do i solve for the foot lamberts
Link to good article that explains it but has easy 3 steps at bottom of article to help you calculate - from people I’ve spoken to, most agree today that the ideal luminance is higher than smpte recommendation of 16. But... that’s the current recommendation
www.residentialsystems.com/blogs/1156
can you please advise what colour our home theatre should be, like burgundy or just deep black
While darker colors in a low sheen are preferred, they don't have to be absolute black. Grays are popular...and our former showroom theater had purple walls.
in fact, any colors you like but those can reflect too much light, such as white, golden, since the bright color enviroment will influence your viewing experience.
Can you have too many foot Lamberts? My projector is a Epson home cinema 2150, so 2500 lumens. Square footage of my screen is 25.84 ft squared. So I have 96.7 foot lamberts. I haven't bought a screen yet. Should I try to get one with lower gain? Or is a gain of 1.1 ok?
of course you should buy one, if projecting to your wall, the image may be very unclear and very easy to harm your eyes, if in a darm room, you just chooose one common screen, if much light in your room, you should choose one light-rejecting screen.
if you have more interests on it, you can add my whatsapp , or email to me
I don't think you are correct. My projectors with never changes, just the height does.
How to Choose A Projector Screen
You must go to some trash cinemas. The speakers for the ones i've been to have the speakers mounted along the sides of the wall all the way back.
Why the hell can`t they just use ONE format???????? I HATE BLACK LINES. Sorry just had to get that out. Who can we call to make every thing 16 x 9?
LOL - would be easier for sure. Was a way to make movies new and exciting at a time when they were anxious to get people back to the Movies. But now, it's a very popular format, so not going away any time soon.
Projector anamorphic lens are pretty neat but expensive. Some 2.35:1 screen users uses that anamorphic lens. It'll retain the aspect ratio and turn 16x9 aspect ratio into 2.35 without losing pixels and brightness.
Ghostbusters:)
Awesome video. Never liked calling it 2:35 and 16:9. I’d rather call it 1.7:1 and 2.35:1