Shawn's Turbo Regal Needs Badges and Some Suspension Work!
HTML-код
- Опубликовано: 29 янв 2023
- Join this channel to get access to perks:
/ @187customs
Be sure to drop a comment and subscribe to keep up with what we got going on around 187 Customs!
Get your official Murder Nova and 187 Customs apparel or order parts for your hotrod at:
www.themurdernova.com
Putting the badges on Shawn's regal and lowering the front to match the rear!
Follow Us!
/ 187nova
/ 187customsllc
/ murdernova
/ 187customs_
/ phantom.405
/ 187customs Авто/Мото
Was just thinking..... If someone is really into cars, and dudes feet...... This channel has got to be AMAZING!
Now That's funny, lol
🤣🤣🤣🤣
🤦🏾🤣🤣
🤣🤣🤣
🤣🤣🤣🤣😂😂😂😂
Erin reminds me a lot of my wife spend 6mnths building a car and 10s of thousands of dollars invite her out to see the finished product and the first thing she does is points out the 1 thing that been driving me nuts the whole build only after spending months learning to accept it for what it is here she comes and reignites that whole frustration for me if u build cars then u know there always that 1 thing that u wish just looked a little better usually only u see it but my wife is magnetized to that shit
Man Shawn, you and Phantom are so funny 🤣. I laughed so hard when you guys were describing rubbing one out while driving and then continued to talk about how it rubs while driving, I was rolling with laughter. You guys are so funny and awesome!!!
2 things...its easier do to front springs on the floor with a jack. Also get an inside spring compressor that essentially compresses the spring up into the pocket and you just roll the lower arm up and be done.
He said that that it was easier to do it on the floor to lower the car down that way
Keep up the awesome work, props to Phantom for pushing the content out on the off season(s). 👏
The look that Shawn gave Phantom lol. Thanks for making my Sunday better
Makes me appreciate my mopar sway bars even more. I can raise or lower with an impact and 3/4 socket. I know I had fun doing the spring install on my gto when it was a bare frame... used a chain attached to a floor jack to the frame lol, it worked.
Less isn't always more, just usually. This car is an exception, it does deserve it's proper badges. Very nice work!!! 👌
Erin is having fun at Shawn and Phantom's expence.
Love the back and forth between Shawn and Erin 🤣
2 outta 3 people like ‘em….badges definitely added some pop to that already beautiful ride!
Just made this Sunday a fun day thanks phantom appreciate you guys and the stuff you guys put out
Loving the videos ! Can’t wait to see the other projects you guys have
The badges definitely a win for this car it helps the white with some contrast plus it pulls the wheels out a bit
1, I love how at the start of the process everything was being measured and marked and by the end, ya, that looks good stick it!! 2, I need more videos where Shawn is catching hell from the Mrs.!!!
So happy to watch the car turned out beautiful !.Have a nice time at the meeting !😄
Absolutely loving all the content you're putting out.
I know man, Phantom is kickin ass with content and picture quality. 👍
Some cars just look cool with chrome and badges and this is definitely one of them!
As for the front springs I always compress them and use some of the biggest Zip Ties to close off one coil the cut the ties off after installation. Works like a charm.
Members Only Jacket...! 🤣😂 The rest of us had concert Tee's, jean jackets and drove TA's , Camaro's or a Hoopty🤘😎🤙
Loving the content! Phantom "Man, this car looks good on camera" 😆 reminds me of my friend telling me that my Squarebody "looks good in the dark" 😆
That car is👌 The ride height adjustment and emblems really made that car! Great work and awesome videos as always 👍👍✌️
That's a beautiful Buick. My mom had an '82 Buick regal. I loved that car.
Shout out to PHANTOM getting the content flowing again anything you guys do I love seeing keep it up PHANTOM 🔥🔥🔥💯
Love them regals for sure👌🏼 Had a 84 regal back in the 90s and cruised it In California all day👍🏽
OMFG,, it's not out of alignment either "bam" the look on your face and the way you both looked at each other lol I'm crying what perfect timing for THEIR to be a bump 😂
The "this is not a good idea guys" but does it🤣🤣🤣 love the channel guys awesome work Phantom
Love those cars, always wanted one. I had a 1983 that my father and I put a Buick 455 in and it was awesome. I have a 84 Cutlass now to play with, but still not a T type or GN.
Their banter is awesome, especially with the boys
I just love that T-type‼️ plus congrats on the beautiful shop ! Aloha from Texas 😃🤙🤙🤙
Looks good guys, I wasn't sure about all the badges. But it looks good with them all on it. I 4sure would have messed 1 of them up some how,just how things go. Thanks Guys
The stance on it plus the wheels on the white paint is a killer combo .... enjoy it ....
Those badges have brackets that go on the body and aligne them at the factory. Now I can say from experience that some still get screwed up and aomwone has to replace them down the line. I worked repair at the end of the line at the flint truck plant and I had tonreplace alot ofnstuckers and badges and I never once used the bracket to Ling either one up. I have put the bracket on after to double check and they were very close so I called it good, lol.
You need a snap-on MSC2. They work amazing on this type of front end to replace the coil springs.
Thanks phantom 👻 keep em coming!!!
Absolutely love this channel. Dude all the tools you have. Get that man a headlamp!!
They never use headlamps only hand held flashlights. Idk why because when I work on cars I need both of my hands free so I always use my headlamp and ill never go back to a hand held flashlights
Head lamp and a spring compressor
I’m rolling on the floor laughing 😂
“The alignment is still pretty straight “ ……. 💥 BOOM. … 😂😂😂😂
I always put a ratchet strap on my spring during removal even with spring compressors because I am terrified 😆. I think about putting a motorcycle helmet on sometimes too. I put electrical tape on my spring rubbers too. I am also about to go swap emblems out on my Silverado even though the windchill is -28°!
It definitely needs a set of Southside Machine lift bars. I had them years ago on my GBody El Camino. Not sure how easy it's going to be to find them now, though.
Absolutely beautiful car. Had a 85 and a 86 Monty Carlo they look good.
Thank you ....PERIOD
Love that “This is what I do, okay” lmfao.
Watch Erin's face during the badges. She is locked and loaded with the "I told you so" the whole time. lol
Looks good fellas love the badges on the 80’s and 90’s cars.
This is one of the few cars that looks better with all the badges. Love your work fellas
Dude!! The emblems finish that car, that look, perfectly!! Breaks up that all white just right, imo, of course.
If your back goes out often toss an extra hinge or two on one of the doors and hang a towel next to it. You kick a doorstop under the door,put the towel across the top and hang..works great and I use it often lol
By far favorite part of your guys videos when ya cruising is the almost every time at some point the oh shit look to each other of wtf was that? Lol.
Getting ready to this same thing to my buddies 67 GTO Convertible. Fun times.
Man that is a good looking ride! Reminds me of the early 90"s!
Man,the car and the new shop look amazing!!!!
Y’all need a spring compressor. One of the ones that go through the bottom of the a arm
yep. simple spring compressor and turn a hour long job into 10 mins per side.
Last video i kept waiting for the "we need stinking badges" comment" and wondered if you were really my people.....today you delivered. Knew you were my people.
Thank you for an hour long video!!
He said he the king of dealing with his bullshit 😂😂😂 man y’all funny af naturally and accidentally
New shop looks amazing to work in!
The attention to detail putting badges on the truck Vs putting badges on the Regal is the difference between precision surgery and giving it a wing and a leg and sending it 😂
I don't know what time it is over there (not their) but thanks for the upload guys, it's beer o'clock here in the uk 🍻👍
GMT -6
I like your red merle aussie. Those 5 spoke chrome wheels look good on that white Silverado too, which is what I have on my lowered NBS in 22" for a better ride. That Regal is awesome!
Shawn that is one beautiful dream ride in white you own there. The stance is perfect and love the wheels. 👍🏼
Good job guys 👍🔥
Yes
Great content, always been a fan of 187 Customs! Just looking out for you guys....Phantom, MurderNova needs a neck lamp instead of holding a mini flashlight in his mouth. Keep killin' it, guys!
I didn't understand the badges at first.. Now that "THEY'RE"on hah , it's badass guys. That car is sharp, and those rims set it off!!.
"Did it work? Yep! Then it's right!"...no truer words have been spoken
They make specific a specific compression kit for it. Uses that hole in the bucket. But some good ol muscle does the trick also
Hell yeah!! Another video!!
QA1 makes a bolt in coil over kit for these cars that fits the top pocket like a regular spring but you get the adjustability of a coil over. And they also make spring compressors so you don't have to tempt fate trying to put those springs in the way you did LOL. Love the channel though guys
Damn!!! Those wheels look awesome on that White T type! Good job guys.
Love the shop!
I love the way the sun/moon roof closes when you brake hard.
Love the video good job you just got to wing it sometimes and hope for the best lol
It's sitting just right now. Nice work.
I laughed so hard when the sun roof blind shut so fast
I cant find a picture but I have a tanker track prybar from the Army that is perfect for that application.... I have a few dents in the head from it because when you hit it with your head while its laying on the rack it doesn't move before the head dents...lmao its pointed on one end and has a 45 bend on the other and weighs about 15 lbs. Cant hurt the prybar.
Great job Shawn at the race master position!!
Lmfao!! Don't forget about the London Fog jackets at the time..hilarious...🤘🤓💯,,,,the emblems put it over the top,,side molding is a must,,
Love the badges on it
Badges make it man looks amazing.
Those wheels look soo nice
Just got done watching the 405 show against the imports it's a really great episode
The burger shop on the south side of town is AMAZING!
Also watching the video in the truck. They make a jiffy lock tool to remove tranny lines and power steering lines. Its a 3/8 jiffly lock tool. Makes life alot easier
Hey getting the window wiring is easy to get flipped when hooking backup to the door control.
After replacing windows over 20 + yrs I have done it a few times. Easy to correct.
Outstanding looking car fine job
I was freaking out 😂😂 but planned to keep it to myself until y’all said something lol
Shawn is loving the phone holder. Lol
i liked it clean but DAMN it looks good with badges!
harbor freight spring compressor kit would help. keep up the sketchy work sean and phantom! 🤣🤣🤣🤣jk
Badge’s really brought the look out
That is a gorgeous g-body and the work you’re doing looks pretty fun! What a lifestyle! 💪🏾🙌🏾❤
They do make a front coil spring compressor. After you get the spindle bolted up you can remove the spring compressor thru the hole where the lower shock bolts in
Man o man is that thing sharp....... so jealous!
Dude love this channel and if that is your new garage wow can you please show the outside of the garage that is beautiful man🤙🤙
Hello from Sweden followed your channel from the start best on RUclips.
The right tools works great
Man no wonder you guys out source all the important work. Holy shit 😂
The Regal looking sharp
thats one of those dream cars that i think i would keep badges on
Awesome bro 👍
Yeah, I'm freaking out right now!
that really set the the car off looks good for to many badges lol.. think its great ...love from OHIO....
Them flexible magnetic advertising deals work pretty good for lineup for your emblems .