Schematics of your projects would help a lot for people new to electronics.. not to long ago i would have needed them to build anything here. So i can imagine how newer people learning this "AWESOME" skill might feel.. it will help your channel. 👍🇮🇪🙏
IV used magnets to connect batteries for a quick test when doing projects or fixing stuff. Never had any problems. But saying that IV never used them permanently, just for testing purposes.
The last one i would(i will coz im going to build it later on)have the LEDs reversed, green for positive+ and red for negative - but it's a personal choice in the end.(really liked that one, and have one of those little 12v batteries and never found a project for it. Now i have).. Id like to know if the counter with the reed switch is accurate at high speeds.. but for winding coils it would be perfect.. number 2, iv made this very same "helping hands" and use it more than my proper one. I also have a large folder clip screwed to the board too for holding heavier/larger boards and stuff (Tip, a bit of heat shrink on the teeth of the alligator cilps helps to not damage parts)👍🇮🇪🙏
The idea is interesting, but at time 07:20 the RED and GREEN LEDs are with wrong resistors and will burn Green LED, while Red one will be too dim. Red High should be 220R or possibly 330R, while Green Low must be 1K, not lower than that.
Hello The earth and positive voltage detection circuit is not practical because red LED is not able to detect voltage 12 because there is no voltage difference between its two pins to turn it on because the battery voltage and the positive circuit voltage are equal and no current is established. If this happened for you, your battery had not new and its voltage had less than 12, and you probably tested the car's battery voltage, which is usually more than 12 volts and the red light is on. danesh hamid iran
Schematics of your projects would help a lot for people new to electronics.. not to long ago i would have needed them to build anything here. So i can imagine how newer people learning this "AWESOME" skill might feel.. it will help your channel. 👍🇮🇪🙏
A project without a schematic = nothing
Pretty cool.unlike other channels, you dont only make a basic motor (fan) circuit
Asli , ini adalah konten kontribusi pembagian ilmu. Terimakasih orang baik😊
За 5-й проект незачёт) Батарейку надо подключать на магнитах!
и какая разница?
IV used magnets to connect batteries for a quick test when doing projects or fixing stuff. Never had any problems. But saying that IV never used them permanently, just for testing purposes.
The last one i would(i will coz im going to build it later on)have the LEDs reversed, green for positive+ and red for negative - but it's a personal choice in the end.(really liked that one, and have one of those little 12v batteries and never found a project for it. Now i have).. Id like to know if the counter with the reed switch is accurate at high speeds.. but for winding coils it would be perfect.. number 2, iv made this very same "helping hands" and use it more than my proper one. I also have a large folder clip screwed to the board too for holding heavier/larger boards and stuff (Tip, a bit of heat shrink on the teeth of the alligator cilps helps to not damage parts)👍🇮🇪🙏
Thank you for sharing the ideas.. I tested the counter with 1000 rpm..
Brilliant, Thanks
I liked 1 , 3 , and 5 ❤❤❤
thank U
This mini counter machine is very useful for many projects
thank u
thinking out of the box! Great! thank you.
❤️❤️❤️
The idea is interesting, but at time 07:20 the RED and GREEN LEDs are with wrong resistors and will burn Green LED, while Red one will be too dim.
Red High should be 220R or possibly 330R, while Green Low must be 1K, not lower than that.
You are right if we are going to use it with 12 volts only,, thanks for watching
Когда жизнь кажется длинной, а мозги не поспевают за руками... Создаются такие творения!
COOL TRES BON TRAVAIL ET 1 ABONNE DE PLUS 🙏🙏👍👍👍
Some nice ideas, I like them.
thanks
Good project 'useful...
thank u
IM SUBSCRIBED
GOOG WORK DUDE,,,,,
thanks
Nice useful 🎉
Can you plzz provide a circuit diagram of last project
ruclips.net/video/kigiLV68Ghg/видео.html
Hello
The earth and positive voltage detection circuit is not practical because red LED is not able to detect voltage 12 because there is no voltage difference between its two pins to turn it on because the battery voltage and the positive circuit voltage are equal and no current is established. If this happened for you, your battery had not new and its voltage had less than 12, and you probably tested the car's battery voltage, which is usually more than 12 volts and the red light is on.
danesh hamid iran
Super Simple Projects 💚👍💐
Project 5 Can Be Used For Continuity,Diode's n Led Testers 💚💚💚💐💐💐
Super nice..
thanks
بالنسبة للمشروع الاول ما هي أقصى سرعة يمكن أن يقيسها ...هل يقيس سرعة ٥٠٠٠ لفة في الدقيقة
الموتور الذي استخدمته سرعته 1000 دورة في الدقيقة عند 12 فولت ونجح العداد في حسابه
@@Inventor_AW
ممتاز ولكن أحتاج أن يقيس سرعة محركات تعمل على التيار المتناوب سرعتها يمكن أن تصل حتى ٥٠٠٠ دورة بالدقيقة ..شكرا جزيلا على الرد
Thanks
فكرة عداد دورات المحرك حلوة ...
لكنه يعمل لعد ١٠٠٠ دورة في الدقيقة ...
هل يمكنك تطويرها لعد اكثر من ذلك ...
شكرا
اكثر من الف دورة يحتاج تقنية مختلفة مثل IR
@@Inventor_AW شكرا لك استاذي
Good to see, very useful
thanks
1 number 😂😂😂
Hello,
Are there experiments on measuring sugar and oxygen in the blood?
sorry , no
what are you waiting for 😏@@Inventor_AW
Добрый день!
Супер!
5-й: Можно под напряжением на 220V использовать?
Можно, но один раз 😂
Нет. Вы можете использовать проверку полярности для напряжения от 12 до 24 В.
😂😂
100% Real Video ❤❤❤
thx
Teşekkürler
На 2000 оборотах счётчик будет ужасно врать а дальше хуже-😉
Но он хорошо работает на 1000 об/мин.
Schematic😊
ruclips.net/video/kigiLV68Ghg/видео.html
YES
This captions of his video ridiculous annoying: This tool useful in every single video... Can't find anything i need.
Спаял третью руку на третьей руке %)
Извините, я не понимаю
ممتاز هل يمكن تشغيل الدائره الاخير علا 3 فولت
يمكنك الاستغناء عن البطارية والاعتماد على جهد المصدر
ruclips.net/video/6mudR_UR6-4/видео.html
Смотрю всё на английском, хотел отматерить по-русски, но вижу понимают русский, 🤣🤣🤣 не буду...
Cool...🎉🎉🎉🎉🎉
🙏🙏🙏🙏💛💛
"... из другого мира..." - это детский сад имелся ввиду?
❤❤❤
🎉🎉🎉🎉🎉❤
hi , i think schematic diagram is wrong can you check please?
led red and green are inverted i think
no mistake ,The two LEDs must be reversed @@slvsgroi
yes must be reversed but respect to the resitors must be inverted I think @@Inventor_AW
in another way I can say that the resistances must be reversed
when you put the prob to gnd which resistor resistors should work?
Don't use a Robot voice - they sound so fake. Don't be ashamed of your origins. Be proud of who you are, even if you have a strong accent.
It's not about being ashamed of who I am...but the majority of my channel's viewers understand the English language
⭐⭐⭐⭐⭐
❤️❤️❤️❤️❤️