VVT Control Solenoid Replacement - Trailblazer 4.2L
HTML-код
- Опубликовано: 3 авг 2024
- This video goes over the procedure on replacing the VVT Solenoid on a 4.2L Trailblazer
Level of difficulty: INTERMEDIATE
Approximate Time: 1 Hour
Tools needed: 3/8" ratchet, extension, 10 mm swivel socket, 13 mm socket
Additional parts: Electrical connector
Motorist: If this job is beyond your skill level, visit your automotive service professional.This video is for general information purposes only. The provider makes no representations or warranties as to the information contained in this video or its usage, completeness, quality or accuracy. Any use of such information is at the user's sole risk, and in no event shall the provider be liable for any consequential, incidental, special, punitive or direct or indirect damages arising from such use.
Vehicle used: 2003 Chevy Trailblazer 4.2
Learn more at: www.StandardBrand.com - Авто/Мото
Just replaced mine on the Trailblazer. Had to pry it out with a few tools, she was stuck in there pretty bad, but mission accomplished. Great video.
i wouldnt have did the new connector just spray cleaned it with electrical spray and blew it out with compressed air.
Good job guy
thank you mechanic wanted $450. for a disabled women crazy huh.thank you again.
Helps a lot thanks
are u supposed to be able to move the solenoid clock wise and counter clock wise once its installed or does that mean its bad
would you run any type of oil cleaner / solvent before changing the oil, filter and VVT Solenoid to ensure all potential clogs are clear?
In trying to do this now but not sure about the connector
You mentioned that you had to replace the connector because oil got up into the connector. Could you not have just cleaned the oil out of the connector? Also how far up from the solenoid did you cut the connector off to re splice a new connector on? Or did you replace the entire wire harness?
BlackDawg98. i would like to know this also 55.dollars for this plug
How can I test the voltage to the solenoid? I have had this code I can not shake.
why I cannot find vid on a 3.6 vvt solenoid replacement.???