What Size Tire Can I Fit? Outlander/Renegade & (HOW TO)
HTML-код
- Опубликовано: 17 окт 2020
- Today I will go over how to fit 29.5, 30, 31, 32, 33, 34, 37 on ANY Outlander Or Renegade! I will show examples and prices as well as insight on what to expect.
#CanamOutlander #CanamRenegade #PATV 
Развлечения
This is super useful, answers all the questions about wheel sizes, just perfect.
THANK YOU SO MUCH! I have been trying to figure out something I finally did u are a 🐐🐐
It took a while to figure these things out, I'm glad I could help!
Very informative, great breakdown of the different setups 💯🍻
Glad you liked it!
I'm running a 2019 850 Xmr Outlander wit 31" outlaws skinny with very little rub and no modifications other than cut edge of rear fender.
Excellent video. First I have seen of its kind. Thank you for putting this together. Is the puck lift just a cheaper way of doing a 2in bracket lift?
Yes, it is easier in my opinion too.
Good video. I need new tires and just wanted to see
I have a 2017 Can am outlander 570 Max extend frame 6 in left super ATV want to run 34s don't really care about the speed what kind of clutching do I need
2018 and below renegades you need wheel off set 5 plus 2 or +38mm for 34s 2019 are inch wider all around
good vid man thx
Thanks glad I could help
What exhaust do you have?
More people need this common knowledge when owning atvs. So many people just throw money into “mods” without knowing a single thing about what works and how much those “mods” reduce reliability.
Do you have a 850 or 1000? I’m looking into an outlander and wondering if I get a 850 will I wish I had a 1000 after a few months? If the xmr just basically has dad relocate and snorkels then I’d rather get the 1000 xtp and just put snorkels on it. But if the 850 xmr has lower gears in diff/transmission or has anything that’s stronger for handling big tires better other than just clutches then I’d go with xmr. Any input from anyone is appreciated
👍
Stock 2014 base model renegade 1000 will rub with 29.5's it'll rip the front bumper and headlights off on a jump lol
What’s up dude so I just purchased a 2021 1000 xmr outlander. It comes wit 30” tires so if I get pucks and after market fb do you think it would fit 34 with no rub? If not how do I crank the shocks up?
I'm not sure how to crank fox shocks up
30" cryptids actually only measure 28" fyi. My Outlaw 3's 29.5x9 are actually taller than your 30" cryptids
@@chupacabraracing181 Okay cool story so how do i crank my shocks?
@@junejuy6791 I was just letting you know they don't measure true...and as for the shocks I had mine cranked at the dealer back when I bought it. I'm sure there is a video on here showing how. Or join xmr monsters group on facebook and I guarantee you will get the answer
@@junejuy6791 you could run 32 sassys no problem with some floorboard trimming. If you do it nice and neat it turns out looking good. No need to waste 400 bucks on aftermarket floorboards that are a pain in the ass to install
What about clutch work at 33inch tires for outlander 1000
Excellent combo
@@WhiskeyThrottle so are you saying it’s not needed?
@@fixxedstr10 in the video he says you can get away with it for 6 months to a year maybe have to replace a belt but yes you need clutching you will feel it
@@fixxedstr10 you will notice the heat
Why don't you use extended front and rear suspension system
It adds alot of stress on axle angles
Those shock spacers will eat your axles
For the vid
You ready to make the trip and ride with me?
Haven't built the motor yet or taken it out ☹
Taking a shit lol thx
If you're going to whisper don't play music in the background Jesus
If your going to suck mad dong do it in private... jesus