Betaflight 4.3 OSD Tab | COMPLETE WALKTHROUGH PART 10

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 121

  • @gucciman420
    @gucciman420 2 года назад +49

    I love watching these BF 4.3 videos. It’s more entertaining than 99.9% of Netflix series.

    • @banzaiib
      @banzaiib 2 года назад +2

      and a better love story than Twilight.

    • @PollokPoochesDogWalking
      @PollokPoochesDogWalking Год назад +1

      ​@@banzaiib after watching them all I can confidently say JB could have fitted more than one person on the door at the end of Titanic

    • @adidadi99
      @adidadi99 Год назад

      True

  • @CameronRidgeMedia
    @CameronRidgeMedia 2 года назад +16

    Your thoroughness in these new 4.3 tutorials has been second to none. I would be a lot more frustrated about this hobby without you. Thank you for all that you do Joshua.

  • @Jyoung5200
    @Jyoung5200 2 года назад +4

    To clarify it’s 400 feet not meters. Thanks for everything JB. Great videos. 👍🏻

  • @bkfpv
    @bkfpv 2 года назад +17

    1hr video on OSD tab alone? Damn Bardwell. As always no shortcuts. Superb series. Thank you for making these.

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад +9

      I said everything! I'm doing my best to live up to it.

    • @MountaineerFPV
      @MountaineerFPV Год назад

      @@JoshuaBardwell Goggles 2 OSD setup for OS3 for a future video JB?

    • @StasGurus
      @StasGurus Год назад

      @@JoshuaBardwellhi! Is it possible to add my own data to osd? For example I want to fly 10km and is it possible to calculate and show how many distance left to achieve this goal?

  • @krazed0451
    @krazed0451 3 месяца назад

    Sidebars provide visual divisioning as well as a reference for vertical alignment towards the centre of the screen. Both of these are useful for framing with videography, and for aligning the quad on more distant objects for precision flight... Plus they look cool 😅

  • @AvallonYo
    @AvallonYo 2 года назад +5

    First! Finally I’m quick enough. Keep it up JB

  • @YarosMallorca
    @YarosMallorca 2 года назад +3

    17:50 - a little correction, in the US you should stay below 400 feet, not meters. 400 feet would be 120 meters.

  • @UpdraftDrones
    @UpdraftDrones 2 года назад

    17:51 You say "stay below 400 meters" I wish! That's 400 feet, JB. Awesome video and super helpful as always! Thanks for teaching us all.

  • @24-7evan
    @24-7evan Год назад

    I gotta say... these Betaflight walkthrough videos are so thorough, and incredibly helpful! PLEASE do not stop making them as they are single handedly allowing me not punch a whole in my computer out of frustration.

  • @jonah6496
    @jonah6496 2 года назад +6

    This is a great series! Everyone watching the whole thing will be a Betaflight expert by the end of it! You're covering a lot of options that I wasn't sure about, and some of them are pretty cool! Total flights? I had no idea the FC kept track of that!

    • @ownzies100
      @ownzies100 2 года назад

      I wonder how it tracks though. If it was simply tracking the amount of arms, it could be pretty inaccurate because of arming/disarming to check motors and turtle mode etc

  • @seb-depp
    @seb-depp 2 года назад +2

    Crazy amount of work, especially with the jump marks. Well done!

  • @dma_k
    @dma_k 7 месяцев назад

    To set timezone correction for "RTC date and time" OSD setting enter "set timezone_offset_minutes = 180" (apply your timezone) in Betaflight CLI, and for "Tx uplink power" to display the meaningful value (otherwise it is always zero) enter "set expresslrs_switch_mode = WIDE" (set "Switch Mode: Wide" in Lua script of the controller).

  • @ryankanefitzgerald
    @ryankanefitzgerald 2 года назад

    Grinding though school... wow. Thanks for making all of these. Game charging series.

  • @tdillondaniel
    @tdillondaniel 6 месяцев назад

    Thanks JB. Great informative video as always.

  • @RodcaFPV
    @RodcaFPV 2 года назад

    I started yesterday and I'm just about to watch the last episode, at the ending of this video I thought you were gonna talk about dji system set up only as you actually did with VTXs, It would be cool to have a video where you cover all about at once. Thank you so much for these series, I'm liking all of the videos in a row (this was perfect timing cuz I'm just finishing a new couple builds)

  • @timorohde95
    @timorohde95 2 года назад

    i was sceptical at first if i would feel a difference but god damn it feels like switching from an 60hz monitor to 120. its soo smooth

  • @Kiprasjurse
    @Kiprasjurse 2 года назад +2

    keep the good work up joshua,

  • @TONY...GTB6
    @TONY...GTB6 Месяц назад

    Thanks!

  • @andresdelgado6778
    @andresdelgado6778 2 года назад

    Always excellent information, we don't have words to express our gratitude for all you do for the FPV community. Thank you again. NOTE: For altitude warning you meant to say that BF altitude is on meters, however 400 is max. altitude in feet in accordance with FAA part 107 CFR in the U.S.A.

  • @Crypto_Rookie
    @Crypto_Rookie Год назад

    Thanks Josh , your great value mate.

  • @KCQuadTronX
    @KCQuadTronX 2 года назад

    love your voice shouting from the transmitter btw

  • @Drieeedger
    @Drieeedger 2 года назад

    regarding the RTC date and time.. thr DVR in my eachine EV200D goggles timestamps all my recordings in minutes from when the goggles were powered up starting in Dec 31st 2010... so having the date and time on the osd can help a lot with identifying flights and lining them up with hd footage or blackbox logs

  • @jasflyfpv9655
    @jasflyfpv9655 2 года назад +1

    Thank you for your work on making fpv hobby more easy to get into.

  • @wearemany73
    @wearemany73 2 года назад +1

    This BF series is brilliantly useful. Thank you JB. 😊

  • @CC_FPV
    @CC_FPV Год назад

    Thanks

  • @BHSFPVDroneClub
    @BHSFPVDroneClub 2 года назад +1

    Great Video! I have watched the whole playlist and have learned a ton. I am ready for PID Tuning!

  • @zg6038
    @zg6038 2 года назад +1

    These are great videos, thanks JB. You answered a lot of detailed questions about features most of us would have never used, making us all better. thanks Again...

  • @MzanziRC
    @MzanziRC 2 года назад

    I'm going to sound super weird, but your voice takes me back to a bunch of awesome memories! Thanks for your channel Joshua!

  • @BeastlyKings
    @BeastlyKings 2 года назад +1

    Greatly appreciate all the information! I've been following since the beginning, and I'm looking forward to the pid tab

  • @LalapopApple
    @LalapopApple 2 года назад

    Thanks JB 👍 Hope this helps many people. Love Ur Tutorial content. Was so glad to found Ur tyro Video Back Then.... And that was Just the beginning 😅

  • @Glenn.J
    @Glenn.J 2 года назад

    Truly a really great playlist. From since when I am in RC (a little more than a decade now), this is the first time I have watched all videos in a playlist, minute by minute and start to end. I can never ever do something like this, this is a lot of hard work, perseverance and patience, thank you for this JB! When can we expect the next episode?
    I am stuck to this playlist, my family thinks I am preparing for an exam lol.,
    Also for those using FrSky R9 S port telemetry, the "TX Uplink Power" on OSD is NOT working, shows 0 all the time - if this helps anybody.

  • @radholm2628
    @radholm2628 2 года назад

    Thanks for your diligent work, happy to be a patron!!

  • @scottdavis7743
    @scottdavis7743 Год назад

    Great f--king video. JB, you are a genious. THANK YOU SIR!!!

  • @faulkie666
    @faulkie666 2 года назад +1

    Great vid, cheers JB!!!

  • @BaconNinjaFPV
    @BaconNinjaFPV 2 года назад

    Great video Bardwell! That intro is the absolute best, lol. I just wanted to say that I love my bones, and although I don't bando bash with it...I do some "light" freestyle and have put it through around 30 crashes at this point. I designed a sleeve mount for it with some guarded sections for the vents and a covered side to keep the SD card from having ejection issues which seems to be protecting it pretty well so far. Now that could change tomorrow...who knows. There is no way I would be running it using the attached mount adapter on the back either, that thing would absolutely break off in a crash no question. The first issue I had with it was the plug not being readily available. It is a Molex Pico SPOX rather than something more common like a JST, and the fact that gopro doesn't carry them (or didnt last time i looked) on there website was disappointing. You can't really get a connector kit and make your own either as the only places carrying the parts are stores like Mouser and you have to buy quantity for it to work out. The quality of the cable was also super poor, and the ends kept wanting to slip out of the connector constantly. Second issue I had was actually the opposite of what you are talking about on its rated voltage range. I decided to run it off of a 5v BEC at first. The Caddx one I had been previously running my peanut on actually. The camera would power up and start recording, I would arm and it would keep going, but as soon as I put a load on the motors and the voltage dipped even slightly below 5v it would shut off. I imagine the iflight balance adapter has a better BEC, but just something to look out for if you are running at 5v. I have been running mine on 6s via a vbatt pad on my FC and put around 70 packs through it without any damage to the camera, not to say that a big spike couldn't kill it. I think it is just important to be running a big enough cap and TVS diode to keep that under control. It is also possible that some of those issues were actually the pins slipping in the connector....because if they were like mine it will absolutely happen. I had to use a dab of E6000 to keep my wires secure even after making sure the plastic retention clips were as tight as they could get.

  • @BigAlFPV17
    @BigAlFPV17 2 года назад

    Thank you JB for creating this video series. Really helps out alot. Keep doing what your doing 😊

  • @pandrews01
    @pandrews01 2 года назад

    Great Series. Awesome tutorials. Extremely informative.

  • @donaldwaddel4600
    @donaldwaddel4600 2 года назад

    I setup the profile selection as you indicated and while having different selections for profiles 1, 2 and 3 the 3 way switch assigned to the Aux channel does not change the OSD profile. The Aux switch position is correctly indicated in the Adjustments tab with a full range of 900-2100. Not sure if or why it would make any difference but I am using a Avatar digital system. PS: The selections are being tested with the quad unhooked from the USB. i.e. The controller has been rebooted after OSD profiles were set. TIA

  • @SeanPitts
    @SeanPitts Год назад

    So good. Thanks Joshua!

  • @ddegn
    @ddegn 2 года назад

    Once you're done with the PID tuning video you can start again with iNav and ArduPilot.
    Thank you JB. This was fantastic. I got a quad flying today (for the first time) which I've had for a couple of years. I previously didn't know how to set it up correctly.

    • @ddegn
      @ddegn 6 месяцев назад

      And I'm back two years later. I'm having fun with my quads but there's still a lot I don't know. Thanks again JB.

    • @ddegn
      @ddegn 6 месяцев назад

      43:25 Side bars aren't trying to display altitude, they display your pitch.
      "You know you love it."
      Yes, yes I do!
      Flying my TinyApe is exactly like flying a fighter jet. I haven't actually flown a fighter jet (or any other real airplane) but I'm sure it's exactly the same.

  • @PerryNguyen
    @PerryNguyen 2 года назад

    Hi Joshua, thank you so much for spending the time to put this content together. It is very much appreciated. Would you please share the Lua script you mentioned for setting RTC over telemetry? I would really like to check it out. Cheers!

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад

      It's part of the Betaflight Lua script. It's set up as a Special Function. github.com/betaflight/betaflight-tx-lua-scripts#background-script

    • @PerryNguyen
      @PerryNguyen 2 года назад

      @@JoshuaBardwell thank you for the link, I was digging around the wrong place looking for it in edgetx

  • @dma_k
    @dma_k 7 месяцев назад

    Needless to mention that there is a limit in how many lines OSD can render for "Post Flight Statistics" (16 is maximum my case), so you cannot switch on all items in that section (expecting they all show up on the analog screen).

  • @SharpTurnsFPV
    @SharpTurnsFPV 2 года назад

    Id like to see the footage from the James bond spy cam blackbox log mentioned at 32:41

  • @oldgamer1157
    @oldgamer1157 Год назад

    That was a very good video thx

  • @jud-asinsmith-stansell2022
    @jud-asinsmith-stansell2022 2 года назад

    Where is the PID tuning video? I will be sending mucho money when I get a chance. Ive had a unflyable quad for over a year. Trying yo learn piece by piece on Betaflight and what might be wrong. Learning curve is steap.
    Thanks

  • @Nelvoro
    @Nelvoro 2 года назад +5

    I have a question, when i have a 4s qauad, and use 6s batterys with trotthle limit too, my video signal (analog) is better with the 6s lipo. With 4s it's weaker and there are some "glitches"?

    • @sunsetpark_fpv
      @sunsetpark_fpv 2 года назад

      Damnnnn thats a great question bro........

    • @ownzies100
      @ownzies100 2 года назад

      You use 6s batteries on your 4s? Doesnt this fry 4s components because the voltage is too high?

    • @Nelvoro
      @Nelvoro 2 года назад

      @@ownzies100 no, the componets are all also for 6s. Only the motors, but i have a trothle cut

  • @MontyX-21
    @MontyX-21 7 месяцев назад +1

    36:22 can you tell me what lua script I shoulde use?

  • @janzajicek9246
    @janzajicek9246 2 года назад

    Super video! Do you know how does it work OSD warnings on DJI goggle? I have hex mode from mbilozub fot BT 4.2.11. On his page mbilozub has hex for 4.3 but this is 16 month old so it must be for some RC of BT 4.3

  • @ls4life544
    @ls4life544 2 года назад

    Great series of video. By the way not sure if anyone had mentioned this but betaflight is not showing the video format option on the OSD tap. Is this correct because it is what I have notice on my betaflight software. I am sure I'm running one if the later version if not the latest.

  • @alikavari351
    @alikavari351 2 месяца назад

    0:11 Does the ground need to have large markings for the sensor to work?

  • @halwhitsitt4157
    @halwhitsitt4157 10 месяцев назад

    Great video as always, thanks! Does anyone know why my OSD wouldn't be showing up? I installed the BetaFPV A03 VTX to the Pavo 25 V2. Is there a compatibility issue with running 4.4.3? Wiring is all correct, VTX tables finally resolved (uses SA 2.1), video signal coming through clear, LED's indicating proper band/channel/power settings, OSD is selected in Betaflight.

    • @halwhitsitt4157
      @halwhitsitt4157 10 месяцев назад

      Also - using Caddx Ratel 2. I used the programmer to make sure it was set to NTSC, as well as NTSC in BF Configurator.

  • @JustInTime0525
    @JustInTime0525 Год назад +1

    How do I set the RTC osd element to display the correct time in my timezone?
    I have changed the timezone setting in my Commando 8 radio but the OSD time doesn't change at all.

  • @Sir_Hubris
    @Sir_Hubris 2 года назад

    Words fail ... what an amazing serie ... priceless !!! thank you so much for the effort! ¶ : - )

  • @loiczeq5551
    @loiczeq5551 2 года назад

    Thanks :)

  • @JohnSmith-xl9bo
    @JohnSmith-xl9bo 2 года назад

    Is there an option for Steam gauges (analog) ? I'm a pilot and Flight Instructor and I'd like to use what I'm used to seeing.

  • @sergiopolonia
    @sergiopolonia 2 года назад

    Hey thanks so much for this playlist. I wired a tbs nano vtx as per wiring diagram but my osd element on my goggles shows this ( ?:?:??) just questions marks any idea what this could be

  • @gubearium
    @gubearium Год назад +1

    hey guys, Question, , can you flip the OSD? i'm running my camera upside down and it allows to flip the image, so that's fine , but the osd is still upside down, , is there an option anywhere, thanks ..
    Runcam v2
    HDZero Freestyle
    Skystar F722 mini HD
    BTFL 4.4.0

    • @gubearium
      @gubearium Год назад

      It might actually be fine, I can just flip the monitor.
      hmmmm

  • @illuminatorix
    @illuminatorix Год назад

    Hello! I need some advise please! I have set on Betaflight my battery's capacity (1400 mah) . But on OSD, I see that I spend all of it yet when I charge it only half is added. Shall I set something different? Thanks!

  • @thatguycarlos
    @thatguycarlos 2 года назад

    "I'm still over here... Turned on, not doing anything..." LMAO I've been entertained by that voice clip so many times already... You do realize the double entendre, you crafted there, right? As a gay guy, my funny bone(r) had been tickled. lolololol

  • @xplode225
    @xplode225 2 года назад

    very new at this, but I don't see any of these osd adjustments in my dji fpv goggle v2

  • @alikavari351
    @alikavari351 2 месяца назад

    I've heard that this sensor works optimally up to a height of 30 cm, is that correct?

  • @TheRandomSqueak
    @TheRandomSqueak 3 месяца назад

    I don't have a video format option :(
    I'm on a Mobula 8 2s with the Walksnail VTX

  • @AEMBowers
    @AEMBowers 2 года назад

    I didn't hear anything about how the digital FPV goggles from DJI only allow certain OSD elements to show. Is that something thas was fixed by BF 4.3 or some other means?

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад

      No. Nothing has changed in that respect.

  • @AnnBarnes-mp8uk
    @AnnBarnes-mp8uk Год назад

    Dji V2 goggles OSD always read 0 for altitude. Do I need to root them to fix this?

  • @ca90068
    @ca90068 2 года назад

    What's your preferred t-shirt size? Got some cool ones for you. Also, where do I send them?

  • @Sugalime3D_FPV
    @Sugalime3D_FPV Год назад

    I learned something :D

  • @DriftaholiC
    @DriftaholiC 2 года назад

    Does the OSD chip on/off selection also disable it for DJI? You didn't mention which elements DJI supports.

  • @Life_a_bike
    @Life_a_bike Год назад

    Maybe I missed it but Is it possible to change the screen to 16:9 in BF4.3.2? I can’t get the OSD working with BF4.4 on my Mamba F722 Basic MK3 FC 😤

    • @JoshuaBardwell
      @JoshuaBardwell  Год назад

      No. You need 4.4 to use HD OSD.

    • @halwhitsitt4157
      @halwhitsitt4157 10 месяцев назад

      Are there issues with 4.4 for analog VTX? Haven't been able to get OSD to show up on my BetaFPV A03 VTX.@@JoshuaBardwell

  • @gerolsot_fpv
    @gerolsot_fpv Год назад

    I bind my goggles integra with caddx vista...and i have auto as video format ta beta flight....when i chang it to hd my left display on goggles become upside down and colorised something like red filter...the wright display its ok....after a few seconds both of them become black....do you know how this has happend?thank you....

  • @Donx2Pac
    @Donx2Pac Год назад

    Hi Joshua. I am a new pilot. I got DJI FPV Explorer Combo. I recently bought a BNF iflight nazgul f5x v2 o3 6s elrs and radiomaster boxer max elrs. On my first flight the OSD gave a RC Smoothing error and the drone kept beeping. I turned RC Smoothing off and the drone quit beeping all the time. Although the OSD still gives me an RC Smoothing error. 😢Can someone help me with this issue? Thanks in advance.

  • @jvio2542
    @jvio2542 2 года назад

    i am currently stuck with my dron. I changed the vtx and the reciever, i finally got the reciever to work but i just wont get any image in my googles, there is no static, its just a black screen woth no osd, i already tried hooking the camera directly to the vtx and that doesnt work either. When i unplug the battery i get static so that tells me the vtx is working.
    I would also want to add that the first time i turned the dron on i did get a vague image where the osd was trying to show up, but since ive been messing with it i can't even get that anymore.

  • @123jerro
    @123jerro 7 месяцев назад

    how is that gonna work when you are using a walksnail vtx? my camera is wired directly to the transmitter via a connector

    • @JoshuaBardwell
      @JoshuaBardwell  7 месяцев назад

      ruclips.net/video/5PWL68Y1Fvs/видео.htmlsi=A3B2GfBdh1fuIuUc

  • @baptiste_nonat
    @baptiste_nonat 2 года назад

    Hi Joshua, are you going to test the iflight commando 8 soon ? Thanks mate !

  • @mechrofpv
    @mechrofpv 2 года назад

    Video format is missing from my tinyhawk3 osd tab and i cant get my osd to show up. Am i screwed?

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад

      If you are using digital OSD like DJI walksnail or hdzero, the pal/ntsc setting is now removed. It doesn't need to be set.

  • @iflyfpv9293
    @iflyfpv9293 2 года назад

    JB I have my OSD set up in BF and it was displaying just fine, now my OSD is gone in the goggles but it still shows that the OSD is set up in BF. I've flashed and reflashed the board to see if I can get my OSD back and no luck... what could it be JB, it was showing just fine and it disappeared...

    • @iflyfpv9293
      @iflyfpv9293 2 года назад

      Thank you JB, Pal/NTSC setting was wrong...

  • @xmonstar420x
    @xmonstar420x 2 года назад

    Do you know if launch control affects your quads behavior after launch if it remains on?

  • @johnnyrocket3200
    @johnnyrocket3200 2 года назад

    Isn't Betaflight and iNav Calculating NORTH from the GPS data? And that's why I don't get the necessity of a Compass for pos hold or other Autonomous functions. Fly 10m in one direction and the quad has it's heading and can always correct it!?!?!

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад +1

      GPS heading doesn't update when the quad is not moving forward. Having to move 10 meters before you know you're going the wrong direction is kind of a big deal.

    • @johnnyrocket3200
      @johnnyrocket3200 2 года назад

      @@JoshuaBardwell Thanks :-)

  • @williamvarnador5688
    @williamvarnador5688 2 года назад

    Why is the video format setting disappearing from my beta flight?

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад

      It's not relevant when using MSP OSD. it's only relevant to analog. So when you select MSP OSD it disappears now.

    • @williamvarnador5688
      @williamvarnador5688 2 года назад

      @@JoshuaBardwell Thank you for responding back,I’ve got a tinyhawk 2 and my osd text not showing up.Tried both video formats and nothing.My camera image is great just no osd info.

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад

      Did the OSD ever work? Like when the unit was new?

  • @therealdohos2607
    @therealdohos2607 Месяц назад

    let me tell you artificial horizon helps me learn to power loop and matty flip

  • @FunctionalDesignsCo
    @FunctionalDesignsCo 2 года назад

    Kind of a long shot but hoping someone will be able to help me here. Why is it that I can't see the bottom part of the image in my goggles? Like I have to move everything at the bottom of the osd up a few rows to be able to see it. I'm using the runcam phoenix 2 jb edition and have it set to 4:3. Changing between 4:3 and 16:9 just stretches and squeezes the image but still doesnt show me the bottom part. And then when I change my goggles (fatshark transformers) between 16:9 and 4:3, it still doesn't show the bottom. In RF Split mode (the mode I need when the screen is attached to the binoculars) , I don't even have the option to switch between 16:9 and 4:3, but I can see the bottom part of the screen is just black so there is clearly enough area on the screen to show the bottom part of the image, it just won't show it.

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад

      This is a function of how the display is showing the image on screen. If you were to use a different screen or goggles, you could see the whole image.

    • @FunctionalDesignsCo
      @FunctionalDesignsCo 2 года назад

      @@JoshuaBardwell Ahh okay well I guess it's time to upgrade from the giant box goggles then. Thanks for the help!

  • @FPVHorizen
    @FPVHorizen 13 дней назад

    50:19 i think you got your wish

  • @suborgulag7289
    @suborgulag7289 2 года назад +1

    If only someone would do the same for inav

  • @TomeiFPV
    @TomeiFPV 2 года назад

    Not a single dislike wow

  • @BrieucduGaray
    @BrieucduGaray 2 года назад

    And how do you add KAAAACK or whatever you want instead of %Throttle when you're 100% Throttle ? :D

    • @JoshuaBardwell
      @JoshuaBardwell  2 года назад

      That's a custom firmware that someone made for Minchan.

  • @aenkavanagh4241
    @aenkavanagh4241 2 года назад

    400’ not Meters

  • @Ryet9
    @Ryet9 2 года назад +1

    Anyone seen my Vape?
    Edit: nevermind.. found it

  • @RCCRAZYSTUPID
    @RCCRAZYSTUPID Год назад

    Another great tutorial video 🤙🔥