DIY Variable Lab Bench Power Supply | 110V/220V to 30V 10A DC Power Supply
HTML-код
- Опубликовано: 5 фев 2025
- DIY Variable Lab Bench Power Supply | 110V/220V to 30V 10A DC Power Supply
The Things I Used -
1. Digital Voltmeter ×1( I am using this )
Buy Link - amzn.to/3YYhXS5
2. 300W Buck Converter ×1( I am using this )
Buy Link - amzn.to/3lLCMkM
3. 5V Power Supply Board ×1( I am using this )
Buy Link - amzn.to/3ICbZAm
4. 10k Potentiometer ×1( I am using this )
Buy Link - amzn.to/3KgWm2r
5. Potentiometer Knob ×2( I am using this )
Buy Link - amzn.to/3IcPvVd
6. Panel Socket/Switch/Fuse/Straight ×1
Buy Link - amzn.to/4104NoO
Circuit Diagram Link -
drive.google.c...
Products I Used
1. Digital Display Soldering Iron
Buy Link - amzn.to/3I5ek6z
2. Soldering Wire, 250g
Buy Link - Out of Stock
3. Soldering Wire 50g + 15gm Flux
Buy Link - amzn.to/40AX6oU
4. Overhead Tripod Mobile and Tablet Stand
Buy Link - amzn.to/3PU6f5y
🙏 Thank you for watching 😊
#DIY_Power_Supply
#Battery_Charger
#Power_Bench_Supply
This was a nice clean build. Simple enough for a beginner to complete. I especially like how you converted a piece of drain pipe into a functional case. I am going to give that a try myself. Thanks for posting this.
If you were to add electrodes would they be positive charged or negative
Lindo trabajo.
Amazing job making a case out of drain pipe. Thanks for sharing. From Texas, USA
You are very welcome
The casing looks supercool. Making a case out of pvc is hard compared to plywood. U have good talent and patience. Keep going
Thank you so much 😊
Your videos are different with others because you attention to any small details in teaching and I like it.
Using Pvc pipes as product case was unique and creative job.
I am thanksful, Well done and keep it up
Goodluck and wish the best for you.
From Golestan, Iran 😊
Using PVC pipes are kind of hard, I would rather prefer buying PVC sheets instead and spray painting them
I think you have used the dc dc converter module which is capable of doing constant current and voltage source as well.
Most of the ready made converters are coming with only voltage adjustment. Nice to see that this module has both...good video
I like the guide as there is no broken english to hear. Thanks!
Excellent project
Alot of work went into this to make and share. Thank you for sharing. Was fun to watch.
Brilliant! Thank you for the innovative ideas portrayed in the video!
Glad you liked it!
Hi, Thanks for sharing this nice power supply. I notice that your connection from the buck convertor to the two potentiometers in the connection diagram is a little different from the actual solderings in the video. Could you clarify which one is correct?
Great project . I did with same components & parts . Value for my time to spend on .😊
Awesome idea with pipe flattening!
Glad you like it!
I agree. Making that pipe so nice and flat must be the hardest part. And takes a lot of patience I guess.
What is the 2 things used with SMPS socket
Very good Project
5v 2A k jaga hm 12v use kar sakta he kya?
compliments for your beautiful project.
Não dá para entender a ligação dos fios da fonte
Nice project! I just couldn't figure out where the led's connected to the board...
They are initially on the DC-DC converter, like the multi-tour potentiometers. He just removes them and places to the front panel. Green for power on and red for short circuit indication.
Super super super super super 👍💯
Thank you dear
@3.43 what components are added and what are there values.
Nice Video
Thank you so much 😀
Untuk lampu indikator nya apakah + dan - nya sama
Good job
So the voltmeter and the step down converter can share the same ground?
This is a nice project but I suggest you make the setup before putting them into the case, sometimes you could burn the wire while soldering in such small space, adding a fan is necessary because 10 amps is a high current for the buck converter and the power supply, small ventilation will overheat the setup and maybe will damage it. Last are the wires, 10 amps needs atleast 18 AWG but in conclusion this is a DIY variable bench power supply
This project is very good!
Thankyou so much dear
9:00 You need to invest in a label maker. Or alternately, get some Dry Transfer Letter sheets, they are very inexpensive.
In that part of the world everything is expensive. Indian guys in their videos make almost everything from scrap.
Nice video bro mgr is me ek Kami hai is smps me aap ko short circuit protection bhi laga dena tha uske bad ye aap ka bord Full price me bikne ke liye ban jayega
SMPS me short circuit protection hain bro.
@@arhemant2796 ☺️☺️☺️
what is that wonder glue?
Which glue do you use? good job ❤️
*Qual nome desse componente que está soldado no soquete?*
Please check in description
@@arhemant2796
*I don't understand what you did with the voltmeter and ammeter, how did you divide the board when it is just one? can you explain to me?*
Can this be done by courier in Bangladesh?
Volt miter kon sha ha Hemant wo batayenge
Thank you very much, excellent project. One question: why is it not protected when joining the test leads?
Because the dc dc converter inside, will also work in constant current mode. So if you short also just it will supply the current value which is set.
Will the circuit work properly if I use 19.5vof 2.31A charger of laptop and connect its output with dc to dc step up module (XL6009) and adjust it to 24v dc and then connect this output wires to 300watt dc to dc 10A stepdown buck converter to get a output voltage varies from 24v to 1.2v?
hemant ji, you didnt mention the model no. of ac-dc 110-220V ac supply 35V,10A in the list....can you pls specifiy...thanks
It's looks more nice if you use voltage-current-power meter
Circuit diagram?
9:17
*I don't understand what you did with the voltmeter and ammeter, how did you divide the board when it is just one? can you explain to me?*
To get the more astheticc look
Very nice good work
Thanks
Very good ! 👍👍👍👍👍
Thanks
Nice master 👍🙏..
Thank you very much
5v power supply board berapa amper
If you went to the effort of desoldering that display.. you could've taken a few 7-segment display modules and wire them up like the small display to get a bigger screen that would look better on a big power supply. Also, cover the display with a foil of some sort, even an black trash bag makes the unlit segments invisible, making the screen look so much better.
Sandaar bro
Love the work you do bro. What was the purpose of replacing the front panel.
It was not possible to fix the acrylic sheets separately
Great!
Thankyou
Please what is the thickness of the pvc
2mm
Isme extra koi fan lgane ki jaroort toh nhi hogi n
Nahi
التلت وصلات الخاصة بالليد طالعين من اين
Buck converter se
Super bro
Thank you 🤗
@@arhemant2796
I don't understand what you did with the voltmeter and ammeter, how did you divide the board when it is just one? can you explain to me?
‼️🤪🛠️ buck converter और smps power supply सभी मार्किट का रेडीमेड हैं ❗️कैबिनेट तो बन ही जाती है ⁉️ और इतनी महंगी नहीं आती इसमें कोई बचत नहीं दिखती
👍👍👍👍👍👍!!!!!! awesome....
Thanks!!
Can I get this completed product from you?
Just ...perfect
Nice video big bro
Thanks 🤗
Won't running a motor without a load cause it to burn out?
No
You've not mentioned complete parts list in description that's about smps suppy, 2 potentiometers etc
Great
Thanks 🙂
श्री मान जी आपने पावर सप्लाई को बनाने के समय बिना कुछ बताए ऐसे ही कनैक्शन कर दिये हैं कितना अच्छा होता अगर आप एक कनैक्शन को बोल कर बताते
nice work.
Thanks!
i have a 12v 20A smps can i use a step up dc-dc converter to make 12 to 30v and then like you use a step down dc - dc converter?
You may use "Buck-Boost Converter".
Can u list the component cost?
Each component pricing
Psu 4k buck converter 700 meter 250 variables and other buttons 300 total 6k ❤
Very nice
Thanks
Sir for channel power supply banao
Don't they sell PVC sheets?
Is this auto cut?
Yes
Totally what is the cost of this product
Maximum 3000
can i get the part list ?
nice
Thanks
thank you so much
You're welcome!
sir mijhko bana kar de deoge kya purchase Karna hai
How much total cost???
Ca you please put a list of all the components names?
So we can buy the items using it, thank you!
Please check in description
@@arhemant2796 Just checked and Subbed you as well.
Hello dear can you make a 120v/220v branch veriable power supply with transformer 120v/220v output voltage
Hi, can you make one for me??? I'll pay you the cost + your making charges, where are you from??? I'm from Bangalore.
Nice
Can you share the parts list
10000000 like
Thank you
What does it do 5v board?
It powers the voltmeter ammeter module
Please make with ATX smps
ATX SMPS Video Link 👇
ruclips.net/video/1VkyYf3PrRE/видео.html
total cost of making?
Maximum ₹ 3000
Thank you for watching dear friend 😊
How much is the smps cost?
₹ 1400
@@arhemant2796 kaha milegq
I want to buy this product. Please sent your whatsapp No or call me.
Hello you did a very good diy this is very useful for me. Just 1 question do i need to short the output everytime im using it to set the amps? Or no need? Just the potentiometer?
Use a false load or add 10 ohms resistor between your output
No you don't. And never do that. He is just trying to show us that the power supply provides 10 amps as promised. When you connect the load to the power supply you will see the current being used. Than you can adjust or limit the current to the requirements.
kripya iska circuit digram bhi uplabdh kaerave
no diagram for the connection? or where to download
9:02
Can put auto ampere option in this
Auto ampere? You can adjust the ampere knob to highest level and the load will decide the current level. That simple.
Adaptere 5v untuk apa itu
That is for the voltmeter display operation. You can use an old phone charger.
Grade job
Can i buy that pls rply
Eu comprei os componentes e uma fonte de 36Volts com 10A logo orei montar minha fonte de bancada por esse vídeo top.❤
ola amigo quanto voce gastou pra montar essa fonte ela vem tudo pra montar?
@@zete814 olá. Conseguiu montar?
nice work
but where is schematic ?
bro use a voltage devider for that 1.4v to make a real 0 v to 1.4 v and than 12v and more
Bro can you help me about your idea
@@sureshgopi8024 just use a third potentiometer for 1.4 to 0 volt voltage regulation
ISO Wire Color Violation (AC INPUT)
SAFETY GROUND ALWAYS USES : Solid GREEN or GREEN with YELLOW Tracer.
** BROWN was used, which signifies LINE (HOT) and that Wire Color was used on HOT AC INPUT (120 or 240 VAC). **
sir mujhko bana kar de dedeoge kya purchase Karna hai
Oo😮
Sir kya mere liye bana doge plz
Total cost?
Maximum 3500
Potentiometer value
10k
Don’t know where he got the equipment . Cheaper to just buy it.