Sorry my English is not so well and you misunderstood me ,I turn off the engine at 1200 rpm handbrake on and sort leaver front... thank u for the information 🙏
When calibration is finished drop revs and turn off tractor. Then start normal and it will be sorted. Your English is grand don't worry I probably didn't explain the start procedure
Thanks again my friend for your time and if you want when you make oil change and filters make a video i just start to working in a farm and he has the mxm 140. really appreciated 👍
I will find out today for you. I'm not as used to the powershift as range commands 👍
10 месяцев назад
Hi Michael, from time to time I have the problem that I can't engage a gear. After switching the tractor on and off a few times, I'm lucky and it works again. No error code is signaled in the cockpit. As soon as you release the clutch and want to drive off (even in reverse), the alarm starts and the gearshift flashes like in the video. There is also a continuous beeping when switching off. Can anyone tell me what the problem is? Video : ruclips.net/video/a_54U0BMYuI/видео.html
we have new Holland t5 105.shares lot with case tractor. Very easy tractor to drive.
Lovely handy tractor the t5 ideal for farming
Is this procedure done the same on an MXU?
I'm not to familiar with the mxu but if it looks the same layout then it should be the same
@@michaelclavin thank you Michael 👍
Good day
I have an MXM displaying an error code FCO which appear to inhibit clutch calibration. Any idea how I can clear it?
When you finish the calibration and you must make the restart to engine you leave the handbrake up the rpm 1200 and sort leaver forward???
I should have said you can start normally
Sorry my English is not so well and you misunderstood me ,I turn off the engine at 1200 rpm handbrake on and sort leaver front... thank u for the information 🙏
When calibration is finished drop revs and turn off tractor. Then start normal and it will be sorted. Your English is grand don't worry I probably didn't explain the start procedure
Thanks again my friend for your time and if you want when you make oil change and filters make a video i just start to working in a farm and he has the mxm 140. really appreciated 👍
Is it The same procedur with fullpowershift gearbox modells of case mxm ?
I will find out today for you. I'm not as used to the powershift as range commands 👍
Hi Michael, from time to time I have the problem that I can't engage a gear.
After switching the tractor on and off a few times, I'm lucky and it works again.
No error code is signaled in the cockpit. As soon as you release the clutch and want to drive off (even in reverse), the alarm starts and the gearshift flashes like in the video.
There is also a continuous beeping when switching off. Can anyone tell me what the problem is?
Video : ruclips.net/video/a_54U0BMYuI/видео.html
The lift is up to the last @ 99%it is pumping constant. Not a good idea
Well spotted fair play. I was after taking the agitator out of a tank and didn't let it of 99. Usually run the lift around 94 to 96
Good man