Mxm 175 case international powershift diagnosis
HTML-код
- Опубликовано: 28 мар 2017
- Tractor would not move forward or reverse, walk through of how to enter diagnostic mode and powershift transmission clutch calibrations. The diagnostic push button tool part# is 380000488.
This is why I stick with my old JD4630 and JD4010. They may not have 32 speeds or AC. But keep the oil and filters changed, good clean diesel, they just keep on running. The farmers in your area are blessed to have you around.
Why the hell would anyone dislike the video makes no sense..
Mountains of information.
Keep it up.
Jealousy, envy, insecurity, sociopathic tendencies.... all characteristics of people who won’t do anything constructive because it’s safer to criticize others. If you’re gonna do anything in the public spotlight you better have the hide of a rhinoceros. I’ve learned a wealth of information on this channel as well as several others.
Thank you so much for taking the time to share this video. Keep up the good work.
clutches F1, F2 and F3 are for low, medium and high range clutches
One faulty hall effect sensor and the whole tractor is useless? Im having about the same issue with a McCormick ztx right now. Im definitely going to ohm that out after watching this. Thank you 👍
When that sensor goes it's usually because the flex plate is shot. Won't bring up any codes.
I can't say i love these transmissions..
I have a New Holland tm 175 that you can put it in forward or reverse and it moves maybe 10 feet and goes back neutral I can get f70 code to come on which is that torque dampener sensor put a new one and it didn’t help still doing the same thing
Good afternoon did you ever find the problem on you tractor i have the same problem
Dear Mr. Grease, that solution sure
was complicated. WELL over My
head. What are Your customers
going to do upon Your retirement?
Major project to access one sensor.
Sincerely, Kathleen.
Kathleen NAWALT Yeah some of this newer equipment with the electronics is a real pain sometimes.
My mxm 175 moves 5ft forward 5 ft in reverse and lift stop working any ideas would be appreciated changed siloeds on the lift no change please help
I've got a tm175 and same problems, has anybody found a fix?
We have a 06 MXM 120 that's leaking fluid out the bottom hole in transmission housing any guessing as to Why? And will this job be a complete tractor split. I almost know the answer but just need to hear it from someone else. Lol. Thanks
See i need to get the book got the one for my ended up being just for tablet and it dident even tank about the trany sensors.
whe have ah tm165 newholland same tractor there was the clutchfailf broken had the same problem
we have a M135 that loses drive and gives a f81 code at the moment which is worn clutch packs but the funny thing is a new alternator solves the issue.
That's odd , transmission controller must not like low voltage.
hello, with pins would the push button connect? thanks, and great video
Great viidio you shour now your stuff im far from tractomachanic do stuff on my own. I think im dealing with some crap like this in my case ih and whish i hade people like u areoud this area im going to go take look see if i have a sesor u wer only vidio that came up on case beside a few other people asking more less for help
I'm having the same issue with a 155, by chance did it display cp when you tried to move
case ih has F1, F2, F3 in calibration one is forward slow, forward medium, and forward fast, in this process you skipped F3.
👍👍thankyou it was helpfol for my keep doing this
got same problem on nh tm175. the clue was entering callibration/service menu on transmition then the hiden code showed.
btw these tractors are hude pain to repair. another problem on my tm 175 is lack of power(over last year got worse and it has now less power than my same iron 130 ;/ ) and wrong rpm reading(random values. do you know anything about these?
Qual é a fixação desta ferramenta para mover um aki
Does this procedure work on an mxm140? I can't seem to scroll through the menu
Ive seen a power shift problem on my uncle's MX285. We were picking corn and I was operating the 285 with the grain cart. While we were sidewinding or unloading on the go. As we were going alone all controls just stopped and the corn went over the cab. Im not sure how they fixed that.
Noel Hohberger Most of the time it's a speed sensor or electrical problem, sometimes the controllers go out but it's rare.
hi there! i have a 2007 mxu 115, it has started flashing CP and me, usually it means depress clutch and off it goes but now i can push the clutch all i like and she wont move, any ideas?
cam c Well, it could be a few things. First thing I would check is the seat switch which are know to fail on those tractors. If that's ok, then there are 2 switches on the clutch pedal, 1 is a 3 wire potentiometer and the other has 6 wires I think. The 3 wire one is usually what goes bad.
it is the potentiometer that you need to get new and get it calibrated:) i had the same problem on a jx1080u
hello ! What does the code f38 mean? new holland tm 165 , thanks
Good job Warren
Thank you
Do you work on trucks also or what - mainly what do you work on
Puma 180 goes neutral while I was driving shows( c.p) on dash now only drive's on 7 forward and 3 reverse any ideas?
Hi great job bud
Nice job mate big thumbs up
allan mitchell Thanks, have a good one.
What exactly did you do - you said you ordered that speed sensor ?? not cheap I bet
I guess I'm just too damn old. Can't understand why it was decided we needed all that Shit.
Warren, you are a journeyman mechanic.
I don't know union terms very well.
It means you diagnose and fix the actual problem, instead of firing the "Parts Cannon" at it.
Thank you
What year is this tractor
How much do charge per hour
This is enough to make a person scratch their head and pull all their hair
All that work to change a sensor. That's crazy.
Whe have ah newholland tm165 and ah tm 135 and also hase that p32 code if it trows it it shuts the pto of
jeffrey hollink Off the top of my head that should be a steering angle low voltage code. You probably don't have auto steer so shouldn't have to worry about it. I have to work on a case tomorrow, I'll look it up to make sure.
And you realize the parking brake was on....
And your point is?
🇺🇲🤝🇱🇻
now I know why you wear a hat all the time! It's because if you didn't, your head would explode from all the experience and
knowledge tryin' to escape
this is the same as tm series of newholland the tm175 and tm190 are the worst tractor ever made by newholland always probelms with electronics and oil
Case ih is a pos im finding nothing good to say from machanic view cant find info on internet we have cx50 and it wont go in reverse. Ill find tip on trobeshooting like check filters and sylonoida and shit then i cant find any info on how to find and do the trobel shoot. Saftys for seat bealts and all kinds of nightmare if any one is looking at a case ih id be sade to tell them to not and i was a case ih farm for over 50 years and other tractors and case is are horror