Removing a Harmonic Balancer // ToolPRO Harmonic Balancer Puller
HTML-код
- Опубликовано: 13 дек 2016
- Find out more: bit.ly/2h173IB
When it comes to a complete overhaul with an automotive engine, eventually the harmonic balancer has to be removed which can be a troublesome task, and potentially damaging. The function of a universal harmonic balancer puller is to line up with either the two or three bolt holes on the front of the balancer, which varies across different engines. Using the correct size bolts to thread into the holes and hold the puller in place, the centre shaft is then threaded through the centre of the puller to brace against the loosened centre bolt that normally holds the balancer in place. The tightening of these pullers centre shaft then produces a pulling acting which safely slips the harmonic balancer off its key. 
Авто/Мото
1:14 solved my problem! Thank you!
LMAO is that a 5sfe? Literally what I'm working on for my Celica right now. Thanks!
How good
Need help to take off old part any advice
That's all well and good, but what do you do when your east west motor is still in the car?
Take a tire off?
Can anyone help us with this my husband is having a hard time taking my off the truck its 2004 ford explorer
What do you mean "make sure the washer remains in place"? You can't leave the washer in the balancer because it will stop you from being able to put the puller through the balancer and onto the end of the crank. The washer MUST be removed with the crank bolt.
I dont know why the kits dont come with 3 6mm / 1/4 inch bolts for the V6 Commodores, bought one for 80 bucks and got no where so crap
Buy 2 "hard" bolts from hardware store.
5/16 - 18 tpi, 3inch (LY7 3.6)
Don't forget to PB Blast or wd-40 soak and clean the threads for the 2 holes you will be using straight across from each other with standard duck-foot puller kit.
What if you strip your threads?
Hi babegyrl704, That's a tricky one. Best to look into a tap & die set, a thread repair set with new threads, or a professional machinist. - Ash
how did you stop the engine rotation
Adrian Percival im having the same problem when I turn the 🔧 the harmonic balancer turns. Aswell
I jammed a flat head in between the torque converter and started teeth
I'm 10 months late but i've seen people who take the bolt off by putting a breaker bar on the nut, then activate the starter for like 1/4 of a second. Interesting way of doing it, no idea how you get the nut back on though.
get an air compressor and air impact wrench
"240great wall
None of the bolts fit a nissan nirvara . Waste of money.
Put the transmission in gear
NOT ALL HARMONIC BALANCERS HAVE HOLES IN EM 🤦🏽♂️ if y’all gon try to help actually help wtf
Got me one of those too, different ballgame altogether
1:18
I don't have any holes for those bolts! Then what?