Thanks for the kind words. I'll post a video of it when they come in,,,, and bash the red one as hard as I can at the dirt bowl where I normally drive. 👍
Hey RC, nice parts haul! I love the neat tidy workbench. You managed to pack a lot inside that blue cowling and 35 isn't too shabby for that small of a scale
I has more power than the sock brushed system and will probably get a proper upgrade some day. I just noticed some guys are mounting the ESC in the battery tray and going with a shorter battery. Either way these little cars are low suctions on the wallet. lol
@@RCRoads It is actually funner with the small scale since it is such a major pain getting the 1/5th scale all setup, then if you crash bad...well it gets ugly fast
Thanks so much. They are very nice RC's and I plan on getting them out. I was going to take out my Lasernut next but I will take one with me and bash it in the dirt.
Thanks GB. These mini sized cars are super fun. I actually painted 2 bodies yesterday and they came out decent. The Typhon Grom comes in blue or red but perhaps the sun made the red one look orange. Anyways.. I don't thin I'll dump too much into these cars but after I run them on the street a bit they will both be hitting it hard in the dirt and skate parks.
I totally agree. It's really just something fun to try. The Grom is just a little bit under powered but I would think that a better battery might help. I'm hoping that the extra power will help the car get more air off jumps. Thanks for watching and commenting. 👍👍 I plan on leaving the red one stock and just bash with it.
@@richardbrown6762 I honestly think that there will be tons of upgrades available for this little guy. The hobby store I go to had like 10 of them and they all sold quickly. I just painted 2 bodies last night and the paint cost more than the clear bodies. Stock parts are reasonable and for the most part I'll stick with plastic parts. I mostly drive off road so eventually they will both be bashers. I just think a bit more punch for hitting jumps would be nice.
Castle 0808 at least 52 mph and I've been advised to get a slightly bigger motor they make for it although 0808, smaller KV is recommended and what got me 50 something miles per hour. 2 mm shaft, 0.5, 17t. I wound up snapping the 2 mm shaft, but only pushing it hard as heck and not while speed running.
Castle has some very incredible systems. I really don't do many speed runs but if I could find a good location I'd probably enjoy it more and crash less. 50 mph is plenty fast for this little guy. The setup I installed cogs way too much. I really just wanted more low end punch for taking jumps and hills at lower speeds. I will definitely check out the 0808. Perhaps go with different gearing.
Thanks for watching. The blue body I started venting with an exacto knife but that was too difficult and probably dangerous. If you look carefully you can see that I just drilled different size holes with a cordless drill. Start small and go big when drilling. I think a dremel tool might be the best way to go. Thanks again for watching and try and stay in range. ha ha Take care ..
@@RCRoads I just did two vents with an exacto knife and ya was a bit dangerous when i got to the smaller ones. I will try a drill on the last ones. And your range issue is the other ESC. Ive never gone outta range on my stock one. And the bigger wheels really help as well. I just put those on today and ran it after watching your video. And they make the Grom look tough! Thanks again for the advice.
What motor and ESC do you have? What heatsink and fan did you do? I'm looking to upgrade the motor, ESC, heatsink and fans for my Mojave Grom when it comes.
I used a cheap system to propel my grom. [ GoolRC Waterproof 2845 Brushless Motor 2800KV & 35A Brushless ESC ] The stock motor has an odd size shaft if I can remember correctly. So you will probably need a pinion gear and proper motor mount. Arrma sells individual motor mounts for each gear size. I think the complete set is like $9. I opted to go with an adjustable motor mount from GPM. I guess it also acts as a heat sink. The can size is the same on the Gool motor so the heat sink works. Fan will fit if you relocate the ESC to the battery tray but then your stuck with short batteries. Everything is a super tight fit.
Thanks for watching. The street tires are available on Amazon. They have foam inserts but I just noticed today that they are not glued so you'll need to do that. Here is the link www.amazon.com/dp/B0CTMPXRQP?ref=ppx_yo2ov_dt_b_product_details&th=1
@@mtnbike4522 The Blue one has some Armma Granite Grom tires. Very resonably priced and they actually work the best overall. Thanks for checking it out.
This little groms are good. Do yours have the upgraded diffs? I popped an mjx system into mine, made is faster than the full size typhon but destroyed the rear diff quick
I have not upgraded the diffs yet. The motor and ESC I have in it now isn't that powerful. I think I'm going to compare the 2 out in the dirt, I just received a set of aluminum shocks from Arrma today. I must say they feel plush. I might be leaning towards the smaller cars for ease of transport but man the Lasernut is a real blast and needs some play time too. I like to upgrade and mess with the cars. I ordered 2 clear bodies for the Typhon Groms and they were super reasonable. I guess diffs will be next. Not too many donuts and I think they should last with my driving.
@@RCRoads I'm a big fan of small RC cars. When it comes to RC, the only size that matters to me is the size of the fun! Big cars are a blast, but can be a bit of a hassle to lug around and maintain batteries for, especially if you're running 2 batteries to make 4s, 6s or 8s. Not that you have to do it that way, but I guess I'd rather have more batteries than less. But charming up 4 3s batteries to run 6s in two RC trucks can be a pain. Small cars have the speed, the quickness, and are actually sometimes MORE durable, relatively speaking. I love little RC cars as much as a massive one.
Seems pretty quick to me. I have purchased some of those off brand esc motor combos myself and have had them cog pretty bad. Don't know your gear ratio installed but over gearing will cause cogging too or bottle necking amperage through small connectors or insufficient Guage wires. May need higher CC rating. Yet without high temps and running only 2s I'd lean towards more amps like a 3s just to see if it helps. Also you may be able to pick up a program card for your esc. That could make all the difference. Looks like a blast though. I'm dealing with the same issue but on the other end of the size spectrum. Put a 12s system in my xrt and have cogging. Waiting on the new motor to see if that fixes it. But when it does take off its ridiculous. Blew my belted front tires right off the rims! Lol😂
@@nicholashunt1983 Thanks so much for watching the video and special thanks for helping me out. The Groms are new to me and I really didn't plan the install that well. I had 3 spare motor / ESC combos that I had and one actually fit so I gave it a go. I had actually bought this motor for my MT12 but the saft length was too short. I feel like an expert at purchasing the wrong parts for my cars. I'm always trying to save money and it ends up costing double. Anyways I have fun with it. I will have to check out your 12s beast to see how it does. The XRT is an incredible RC for sure.
It looks a lot quicker to me I’m thinking about getting the Firna brushes 2 in 1 combo but it says it only fits for the Mini Bs hmm I thought people were running those in there Typhon Groms too.
I haven't seen anyone running this system in their Typhon Grom but it's a perfect fit. Super nice system. If I get back into the Groms I will for sure get this system... 👍 Furitek SCORPION 5600kv Brushless Sensored ESC/Motor Power System for Arrma Grom
Thanks for commenting. I really have no idea. It's such a tight fit. If you already have the motor and ESC on hand you should be able to scale it out. I did see one guy that put the ESC in the battery tray all the way to the front. Then he went with short 2s & 3s lipo's. Getting the right pinion is the hard part. It has to be the same pitch as the stock spur and the bore has to match the motor oh yes and the tooth count has to match the motor mount.
@@RCRoadsah yes thanks. Ive seen someone fit the vxl system in the same way as you did in this vid. Although im quite new to upgrades etc and wonder how did you fit the mount for the esc in the receiver?
@@t3floz I just kind of tossed everything in. I installed the Hot Racing servo mount that is intended to mount the ESC but the extra thickness of the plate was too much height and the body would not go on. Some are just sticking the ESC to the Servo with double back tape and have had better luck. I finally just placed the ESC on top of the chassis brace to get the body to fit. Others have shimmed the body clips with washers and some have mounted the ESC in the battery trey and went with short 3s batteries. Not an easy car to upgrade. Best of luck.
Speed run at 4:20 ignore the messy wiring 😊
A very nice and cool Upgrades!!!
Now he just Fly😮
Cool tutorial my Friend ❤
Thanks Panda,, 😊❤the small cars too.
You're welcome my Friend ❤
Cheers 🎉
nice upgrade. looking forward to seeing the new tires👍
Thanks for the kind words. I'll post a video of it when they come in,,,, and bash the red one as hard as I can at the dirt bowl where I normally drive. 👍
You're going to make me go buy a Grom! 😂😂Great video. I just subscribed to your channel.👍👍👍👍👍👍
Thanks for watching and subbing. The Grom is nice for the days you don't want to haul out the big cars. They are an awesome RC.
Hey RC, nice parts haul! I love the neat tidy workbench. You managed to pack a lot inside that blue cowling and 35 isn't too shabby for that small of a scale
I has more power than the sock brushed system and will probably get a proper upgrade some day. I just noticed some guys are mounting the ESC in the battery tray and going with a shorter battery. Either way these little cars are low suctions on the wallet. lol
@@RCRoads It is actually funner with the small scale since it is such a major pain getting the 1/5th scale all setup, then if you crash bad...well it gets ugly fast
@@RCWalletVacuum I must agree but the awesomeness of a large project can't be matched. 👍
@@RCRoads My checkbook disagrees, lol
Can’t wait to see the final result 💪🏾💪🏾 awesome vid Rcfam
Thanks so much. They are very nice RC's and I plan on getting them out. I was going to take out my Lasernut next but I will take one with me and bash it in the dirt.
looking awesome brp..perfect orange body🤩👌
Thanks GB. These mini sized cars are super fun. I actually painted 2 bodies yesterday and they came out decent. The Typhon Grom comes in blue or red but perhaps the sun made the red one look orange. Anyways.. I don't thin I'll dump too much into these cars but after I run them on the street a bit they will both be hitting it hard in the dirt and skate parks.
I see people putting high power motors in the mini's and usually it's a little to fast to actually be fun but good video 😊👍
I totally agree. It's really just something fun to try. The Grom is just a little bit under powered but I would think that a better battery might help. I'm hoping that the extra power will help the car get more air off jumps. Thanks for watching and commenting. 👍👍 I plan on leaving the red one stock and just bash with it.
@@RCRoads20+mph is not bad for a mini I'll wait until they come out with adjustable turnbuckles and camber links and then I'll make mine faster 😮
@@richardbrown6762 I honestly think that there will be tons of upgrades available for this little guy. The hobby store I go to had like 10 of them and they all sold quickly. I just painted 2 bodies last night and the paint cost more than the clear bodies. Stock parts are reasonable and for the most part I'll stick with plastic parts. I mostly drive off road so eventually they will both be bashers. I just think a bit more punch for hitting jumps would be nice.
@@RCRoads well I don't jump my cars it's to expensive for parts IF you can find them that's my problem now my hobby shop don't seem to have any 😯😐
@@RCRoads I've got a losi nascar on order now and some of the parts from the arrma grom and typhon are interchangeable 😎👍
Castle 0808 at least 52 mph and I've been advised to get a slightly bigger motor they make for it although 0808, smaller KV is recommended and what got me 50 something miles per hour. 2 mm shaft, 0.5, 17t. I wound up snapping the 2 mm shaft, but only pushing it hard as heck and not while speed running.
Castle has some very incredible systems. I really don't do many speed runs but if I could find a good location I'd probably enjoy it more and crash less. 50 mph is plenty fast for this little guy. The setup I installed cogs way too much. I really just wanted more low end punch for taking jumps and hills at lower speeds. I will definitely check out the 0808. Perhaps go with different gearing.
What did you use to cut the vents out on the back of the body? And great video. To bad it kept getting outta range on you.
Thanks for watching. The blue body I started venting with an exacto knife but that was too difficult and probably dangerous. If you look carefully you can see that I just drilled different size holes with a cordless drill. Start small and go big when drilling. I think a dremel tool might be the best way to go. Thanks again for watching and try and stay in range. ha ha Take care ..
@@RCRoads I just did two vents with an exacto knife and ya was a bit dangerous when i got to the smaller ones. I will try a drill on the last ones. And your range issue is the other ESC. Ive never gone outta range on my stock one. And the bigger wheels really help as well. I just put those on today and ran it after watching your video. And they make the Grom look tough! Thanks again for the advice.
What motor and ESC do you have? What heatsink and fan did you do? I'm looking to upgrade the motor, ESC, heatsink and fans for my Mojave Grom when it comes.
I used a cheap system to propel my grom. [ GoolRC Waterproof 2845 Brushless Motor 2800KV & 35A Brushless ESC ] The stock motor has an odd size shaft if I can remember correctly. So you will probably need a pinion gear and proper motor mount. Arrma sells individual motor mounts for each gear size. I think the complete set is like $9. I opted to go with an adjustable motor mount from GPM. I guess it also acts as a heat sink. The can size is the same on the Gool motor so the heat sink works. Fan will fit if you relocate the ESC to the battery tray but then your stuck with short batteries. Everything is a super tight fit.
Do you have the link for the tires? Great set up
Thanks for watching. The street tires are available on Amazon. They have foam inserts but I just noticed today that they are not glued so you'll need to do that. Here is the link www.amazon.com/dp/B0CTMPXRQP?ref=ppx_yo2ov_dt_b_product_details&th=1
@@RCRoads What wheels and tires are on the blue one? I like that look of the wider rubber
@@mtnbike4522 The Blue one has some Armma Granite Grom tires. Very resonably priced and they actually work the best overall. Thanks for checking it out.
This little groms are good. Do yours have the upgraded diffs? I popped an mjx system into mine, made is faster than the full size typhon but destroyed the rear diff quick
I have not upgraded the diffs yet. The motor and ESC I have in it now isn't that powerful. I think I'm going to compare the 2 out in the dirt,
I just received a set of aluminum shocks from Arrma today. I must say they feel plush. I might be leaning towards the smaller cars for ease of transport but man the Lasernut is a real blast and needs some play time too. I like to upgrade and mess with the cars. I ordered 2 clear bodies for the Typhon Groms and they were super reasonable. I guess diffs will be next. Not too many donuts and I think they should last with my driving.
@@RCRoads I'm a big fan of small RC cars. When it comes to RC, the only size that matters to me is the size of the fun! Big cars are a blast, but can be a bit of a hassle to lug around and maintain batteries for, especially if you're running 2 batteries to make 4s, 6s or 8s. Not that you have to do it that way, but I guess I'd rather have more batteries than less. But charming up 4 3s batteries to run 6s in two RC trucks can be a pain. Small cars have the speed, the quickness, and are actually sometimes MORE durable, relatively speaking. I love little RC cars as much as a massive one.
Seems pretty quick to me. I have purchased some of those off brand esc motor combos myself and have had them cog pretty bad. Don't know your gear ratio installed but over gearing will cause cogging too or bottle necking amperage through small connectors or insufficient Guage wires. May need higher CC rating. Yet without high temps and running only 2s I'd lean towards more amps like a 3s just to see if it helps. Also you may be able to pick up a program card for your esc. That could make all the difference. Looks like a blast though. I'm dealing with the same issue but on the other end of the size spectrum. Put a 12s system in my xrt and have cogging. Waiting on the new motor to see if that fixes it. But when it does take off its ridiculous. Blew my belted front tires right off the rims! Lol😂
@@nicholashunt1983 Thanks so much for watching the video and special thanks for helping me out. The Groms are new to me and I really didn't plan the install that well. I had 3 spare motor / ESC combos that I had and one actually fit so I gave it a go. I had actually bought this motor for my MT12 but the saft length was too short. I feel like an expert at purchasing the wrong parts for my cars. I'm always trying to save money and it ends up costing double. Anyways I have fun with it. I will have to check out your 12s beast to see how it does. The XRT is an incredible RC for sure.
It looks a lot quicker to me I’m thinking about getting the Firna brushes 2 in 1 combo but it says it only fits for the Mini Bs hmm I thought people were running those in there Typhon Groms too.
I haven't seen anyone running this system in their Typhon Grom but it's a perfect fit. Super nice system. If I get back into the Groms I will for sure get this system... 👍
Furitek SCORPION 5600kv Brushless Sensored ESC/Motor Power System for Arrma Grom
@@RCRoads sounds good man I’m just figuring it what I should run in mine wether I should go with the hobby wing system or not.
@@RCRoads hopefully you watched my Arrma grom Typhon video I gave you a shout out hope your evenings going well buddy.
@@GearWorksRc Thanks so much. I will definitely tune in. Love your channel.
Would my traxxas 1/16 brushless motor and esc work in this?
Thanks for commenting. I really have no idea. It's such a tight fit. If you already have the motor and ESC on hand you should be able to scale it out. I did see one guy that put the ESC in the battery tray all the way to the front. Then he went with short 2s & 3s lipo's. Getting the right pinion is the hard part. It has to be the same pitch as the stock spur and the bore has to match the motor oh yes and the tooth count has to match the motor mount.
@@RCRoadsah yes thanks. Ive seen someone fit the vxl system in the same way as you did in this vid. Although im quite new to upgrades etc and wonder how did you fit the mount for the esc in the receiver?
@@t3floz I just kind of tossed everything in. I installed the Hot Racing servo mount that is intended to mount the ESC but the extra thickness of the plate was too much height and the body would not go on. Some are just sticking the ESC to the Servo with double back tape and have had better luck. I finally just placed the ESC on top of the chassis brace to get the body to fit. Others have shimmed the body clips with washers and some have mounted the ESC in the battery trey and went with short 3s batteries. Not an easy car to upgrade. Best of luck.
Do the wheels fit on with standard arms
Yes the all fit just fine. I had no issues and there is plenty of clearance with the stock suspension arms. Thanks for watching.
@@RCRoads thanks so much for the reply look forward to more content