Live Q&A with John Heisz
HTML-код
- Опубликовано: 11 окт 2024
- John Heisz will be visiting my shop this Thursday, so I figured this would be a cool opportunity to do a live Q&A with both of us.
More about this here: woodgears.ca/mi...
John Heisz's RUclips channel:
/ jpheisz
My main RUclips channel:
/ matthiaswandel
I finally worked up the nerve to watch this :D
hey john did you say you were a train engineer?
i think i remember an old video of yourse explaining your job while doing some renovations to a school door ... how's that?
don trump
That was more of a joke. In construction, we would say that a particularly inept engineer was a train engineer, as in not a real engineer.
I loved it. Great sense of humor on both of you guys. Glad we got to see that.
You guys make a great duo. I would like to see a collaboration with you two. Though I'm not so sure what the project would be since you guys do such similar things.
John, 3 Questions please:
- Now that Matthias has moved, is he closer to you than 4 hours?
- Will you two be doing another live session like this one? (I hope so!!)
- Do you watch Mustie1 videos??
The best thing about the saw stop is whenever someone buys one a good saw becomes available on the used market
good point there!
💯🔜🔳✅💯✅💯💯✅✅💯✅💯✅💯✅✅💯✅💯✅💯✅💯✅💯✅💯✅✅💯✅💯✅💯✅💯✅💯✅💯✅💯✅💯✅💯✅💯✅✅💯✅✅✅✅💯✅💯✅✅💯✅💯✅✅💯✅💯✅✅💯✅💯✅💯✅💯✅✅💯✅✅💯✅💯✅💯✅💯✅✅
Sorry for the late youtube post. It was only a few hours later that I realized that not only did I have to stop streaming, I also had to click the button on youtube that said "stop streaming" to turn it into a youtube video.
Thanks for doing this Matthias, My two favorite tubers side by side. good watch!
I managed to watch the last 10 seconds of the stream so I will definetly wach it tomorrow after work :)
did you know, there are actually saws, like sawstop saws from different vendors, like bosch. That do the same thing without ruining your blade :D
did john say he awas a train engineer?
i probably misunderstood because he has a video explaining his job and how he has been a handyman/carpenter all his life
Andreas I have you seen that Bosch lost the patent lawsuit against them?
Its great to see two of my favorite people on RUclips on the same video.
Wonderful to see the non-commercialized guys together. As long as there are no Festools in either shops, I'm watching.
I have a festool clamp!
Dogma is for non-thinkers.
another thoughtless aspersion
Why are Festools so bad?
They are German made and engineered!
I'm sure they're great high quality products. But the price is not for us weekend woodworkers, so when I see the guys using them, I switch channels. That's what I meant.
Finally watching this - It's refreshing how level headed you both are.
Luckiest find was my broadcast tripod.
My two fave wood workers talking shop and joking around! Life is good. Well done, guys!
I enjoyed this Q&A video of my two favourite Canadian woodworkers but I enjoyed meeting both of you in Toronto in May even more. I did not realize that you guys had been friends for years. Thank you for filming and sharing.
I really enjoyed this Q & A. I wish I could have caught it live...but it was fun to watch.
I watched this live but I'll comment here :D
It was great seeing the last couple minutes where you thought you'd stopped streaming, but hadn't :P Two awesome makers, side by each! What a great video :D
Like I have commented on both of your channels, Thank You for the inspiration, and the laughs. You tell it like it is, and to me, that is important! Not worried aboot, the comments, or the negative feedback, and for that, I give another BIG Thank You!!!!!! Please keep sharing your honest opinions, and thoughts.
Love y'alls banter back and forth. Really good on-screen personalities, especially when paired together. Thanks fellas!
As you both know, I have been watching your channels pretty much since you both started (or very near). It was really good to see you both together! The Q&A was very interesting and entertaining.. Thanks for making the trip John! Matthias, I must say I had not seen so much of your humor and enjoyed it. Thanks for doing this with John!
Thanks Mac!
Two of the best woodworkers in the world together!!!
i was listening to you guys while sitting at my desk working. very entertaining. i was expecting to click stop after 20 minutes but i watched the whole thing. thanks from oz
Caught some of the stream and then came back to finish the rest. Thanks to John and you for sharing, was interesting. Admire both of you. Best wishes.
I'm 40 minutes into a "talking" video that I thought I would just check out very quickly. Awesome video guys. Very entertaining.
11 seconds in... "we are live probably"... the eybrow raises, head turns and the eyes question, shoulder shrug, small hurmpf, quirk smile, grab a drink... at 28 seconds more eyebrow... Matthias you were teetering on the edge of witnessing the conversion to Primal John. Then you just kept poking the bear throughout. Great to see you two bantering together.
You two are the best. Glad to see you guys are friends.
A cool idea for a live Q & A like this would be to have a 3rd person behind the scenes screening the questions that are coming in. That person would filter out the noise and trolling, and queue up the questions for you two to answer. The questions would then be displayed on a larger screen so you can read them easier and faster. That way the two of you could sit there and chat without having to stare at the screen.
Good idea
I propose that subscribers submit questions ahead of time
Ah crap. I had no idea this happened. Seems like you two had a good time....
I heard an, "I agree." from John @ the 30min mark. My world view has been shattered.
I used Openshot in Linux for my first 20 videos. Glad to be done with that.
Thank you, Matthias and John. I enjoyed.
loved this and both of your channels! it's good to see more of your personalities come through. i found that i kept wanting John to elaborate further. i think if you answered fewer questions, but in greater depth it would be more fun. Pick a question and use it as a discussion point between you both! the dynamics between you two are what make it more fun, more so that the questions themselves.
Sad I missed this. Two of my favorite RUclipsrs!
you guys are awesome, this vid to me was great, and reminds me of a time way back were my friend was a framer and ive learnt alot from him in reguards to building things strong enough and he learnt how to finish things, so great times...i had to re-invent a bench that i built and sold over 300 of them and all was great...so to me sharing things is very helpful...thanks again for this great vid...awesome job guys!!
This was great fun to watch. You guys are obviously great mates and it's awesome how you both inspire each other.
This was fun when it went live. And I even made Matthias laugh.
I think it is great that you guys live close enough together to visit. I look forward to future collaboration between you.
Thanks for doing this. It was fun to watch and hear your answers to the questions. It was a nice surprise.
Both of you are a super model of wood working, i am just quite surprise that almost all your achievements on woodworking are so amazing,. For me, i am mastering the joinery by not using bolts, screw or glue. I love watching both of your creation or inventions & i tried to copy both of you,. Keep up the good work Gentlemen & God Bless both of you,...
Two of my favorite RUclipsrs, thank you guys.
G'day from down under. You two looked like you enjoyed yourselves, I know I did. Well done. When I was over there I liked Moorhead as well.🍻
Regards
Wayne
I wish I had seen this, my two favourite men on RUclips. Just realised now that it was over when I got home but I thought it was waiting to start because of the black screen. Anyway, maybe there will be another when Matthias goes to John's shop. Thanks for doing this, I'll watch it all later, 5.20am here, so that's something to look forward to.
Bst Wishes, Brendan.
Finally got a chance to watch this and I really enjoyed it. This is the first time I ever watched a Q&A because, really, none others interested me so thank you for doing this.
Best Wishes, Brendan.
Let's not be modest Brendan we need one from you.
LOL Don, I'm way out of my league with these two boys but I do have a new project coming up soon when my mates arrive back here to build an extension on my workshop. There are a few technical, and legal, issues that they have had to address so, if you are interested, you might like their solutions.
baconsoda )
You two are so funny. A Big Thumbs up.:) lol even though you don't like cats John Heisz I still love watching your videos :) My husband and I really enjoy watching you both, we have learned a lot from you two. Thank you both for sharing with us:) Hope to see more videos from the both of you.
For those of you that don't know, a kilometre is 1000 metres which is the distance light travels in 1/299792458 seconds. A kilometre is not defined by miles but 1 mile is _precisely_ 1609.344 metres.
This was fun to watch. Thanks for doing it!
I can't believe I never heard of Colinfurze before this. Glad I watched.
I found when deeping timber on the band saw it helps if you run the diamond stone to the side of the blade,keeping the set even it helps keep the blade straight helps stop creeping.
Joe . Northampton.
You guys are a good personality match. Matt knows the physics and John knows you usually don't need to know that. John, when you get around to it, show us what you've done with your new pantorouter. Lucky you. Please read the question aloud when you're answering one, so we know what you're referring to.
I took drafting in the seventh grade and now it is dead, lol. Loved making doors with the semi arc showing the direction they opened and now all of that is dead. :(
Like a few other comments - one alteration is having a larger monitor frontwards near below or behind the camera tripod so you both are looking towards the camera. And the luxury of an off screen moderator/facilitator would mean a great improvement. Even in the rough it was entertaining and informative. Rest up and try this again.
Lemmings was my favorite game when I was a child.
YES!
I made my own self sander for sanding bowls and it works great, every self sander that I bought so far something broke on them, it's two berrings in a copper pipe fitting then a shaft bolted to the berrings and a sanding pad, when it slows down just slip out the berrings and oil them.Everything that I used except the berrings and the sanding pad to make this was from from junk around the house, my question do you make video from some one else's ideas
Good to see your two together. A little different, but both goooood for woodworking people. :)
This is wonderful! Two of my favorite youtubers in one place. Add in AVE and all the best Canadians would be in the same room lol.
You should do this with Diresta.Or even better, AvE!
I love the videos of you 2 RUclips. giants! I hope youre planning a project togehther! I´m sorry I missed this video on time!
"It's my makeup"... LoL! Killer, John! Nice vid, guys.
You guys should do another one of these!
i dont think i have ever seen Matthias have a normal T-Shirt on
I missed it live but glad you posted this. Pretty cool guys!
I wanted, so badly, to refill Johns water. He was making me thirsty.
Awesome! Rats, sorry I missed the live version. Great seeing my two favorite wood workers answering questions together. You guys should do a collaborative project together, now that would be cool!!........................... :) Steve
Youre both from Canada Oh gosh I'm gonna have to rethink existence all over again U guys both rock ALOT The amount of info for the average guy on the street on your channels collectively is priceless. I consider You both the best of the best Why John are not all 3/4 bits created equal Also I want to commend you both for still having 10 fingers like me These kind of cutting operations always look more dangerous when someone else is doing them.....
Thanks for putting this up! Two awesome youtubers!
great woodworkers meet under the same roof. thats wonderful
That was actually very good and very funny!!! Poor John, get him a refill, willya??? He did everything but wring out that glass.....
Seriously, that was good, and enjoyable.... Gave me a laugh. I imagined John to be about my age, Matthias's age surprised me....
Really Mathius sharpening a chainsaw with a grinder dropping hand planes on your tablesaw my hero
I kinda feel that the length of Paul Sellers' videos suits the vibe of his style of woodworking - more of an anti-fast food hand tools approach. Plus they tend to be more about technique than new or innovative designs - i.e. Woodgears videos aren't teaching you how to use a chisel, they're showing you an interesting project. To a degree, a lot of Sellers' videos are less about the end product and more about learning the processes - thus going through everything in detail makes sense.
That's not to say there aren't plenty of producers putting out videos that could do with some serious editing; the "VerySuperCool Tools" guy does some great products, but he tends to take 30 minutes to say (often repeatedly, and then again in the next video in a series) what could have been edited into 3 minutes.
True, I kind of figure you already know how to use a chisel and telling you how to do it is insulting your intelligence.
Yeah, but my chisels (or hand planes, or spokeshaves, or saws) never seem to be quite as accurate as his. Must be the tools. Nothing to do with experience or talent ;)
OMG I thought you were arch enemies and never met each other, and if that happened you would fight to death!!!! :P
Thanks guys for so many hours of knowledge sharing and fun. Cheers!!!
I thought it quite good as a first attempt. You should be satisfied with the result and having done this now your understanding of the process should make ( for both of you ) it an easier effort in the future. Definitely at several points you had good interaction occurring though watching you two watching the comments stream by was occasionally painful so your initial idea to have a prepared list of questions as a fall back would be sensible. Would be helpful if there was a tool to divert quality questions from the train of repetition ( which wasn't specifically a viewer problem except in aggregate ). Do think about mounting occasional future editions you both will soon have a handle on it and it was valuable.
My question would've been: Have you considered getting into some kind of metal founding or casting? It seems like a great way to use your gear software and you could take advantage of the RUclips sensation of melting soda can with a propane, wood gas, or homemade charcoal foundry. How many RUclips keywords was that?
sadly the stream wasn't working at the time i joined in. i had some questions too. but it's fun to watch this too :)
haha i love both of your vids been watching for years now...and im glad you guys have a great scents of humor...yes woodworking should be fun or not many people would do it...thanks guys
I've found a couple motors in HVAC store dumpsters. They are often weird and run at slow rpms like 1750 or close to 1000 for the forced air blowers, but they are often at least 1/3 hp
I love the marble run videos, finally made one too.
My 2 favorite RUclipsrs..love it!
Thanks for doing what you do
Shame I couldn't watch live, had to be at work :( Thank you for archiving it though!
I love Johns work!
the only person we need here is Izzy Swan, then the apocalypse rebuilding team is ready to go.
My two favorite together! Wow
wow - my most favorite personalities together!!!
keep up the great videos fellas you both have been an inspiration to me
Very entertaining:)
you guys should make this like a yearly thing
Johns shirt reminds me, when can we expect Woodgears t-shirts??
This was great, guys!
Great stream! That was fun.
Will you have a word with your self Mathias please put some warning out about these awesome q&as and live streams I keep missing these as RUclips won't notify me :(
Matthias definitely has the best 42" strip sander. John has a real good bigger strip sander.
i think the original comment was saying that
hi where are you guys from i watch both of you and your great
Im from Moncton NB
With your combined critical thinking abilities. At the end of every year, couldn't you take nominations (as well as your own) for Best Wood Video (with categories) on RUclips? Then a broadcast RUclips called the Wandel-Heisz Awards or the Woodies or...? I know I'd like to do it but I just like to watch.
I will leave it to everyone to pick their own favourites.
Two good reasons to be proud to come from Canada! Where you guys are from exactly ? And, you can send me one of your extra pantorouter anytime ! ;)
would you consider making the plans available for the plasma cutter pantograph?
I am 4 years to late. Just found this. Hi guys
hi from Japan
Re Matthisas skippng ahead. I have the same internet supplier.
I use a YT download add on, then watch on MPC Medial player classic. Much more control
- volume on the thumbwheel, skipping ahead, freezeframe, step ahead frame by frame.
unable to save this file though.
I know this could be a lot of work, but if you watch this again, any chance you could annotate the video with the names you mention? It is very very hard for a non-native speaker to figure out the names.
really like your work from cambodia
You two would make a great couple.
What channels would you recommend over Chuck2009? I really got tired of his style, but don't know anyone else with the same regularity or consistency.
this old tony, welding tips and tricks. And either of those are way more knowledgeable.
i missed it because of our time zone :(
thumbs up guys! really enjoyed this vid
You are live!
Push stick humor was classic!
I want more videos from your alterego in the backyard if i were U I would never leave the backyard kudos for patience REALLY
Oh Matthias what do you thing about a wooden scooter, with electric motor or without ??? :/ :D
I enjoyed this video... lots of laughs too....
both are the wood's Papa!