Exhaust Part 1 - ULPower 350iS Engine - Zenith 750 Cruzer Kit Plane Build

Drilling holes in the exhaust tubes for EGT sensors and replacing the sealing rings. UL350iS engine.
🛠🧰🛠Tools We Use to Build Our Airplane (that you can get from Amazon)🛠🧰🛠
+ Rivet Gun amzn.to/2oZIpP5
(Be sure to use the custom heads from Zenith for the Zenith rivets!)
+ Gyroscopic Lithium Screwdriver amzn.to/2MnTqBI
+ Swivel Deburring Tool amzn.to/328LRWl
+ Edge Deburring Tool amzn.to/2Iyqy8I
+ 1/4” Drive Torque Wrench amzn.to/2VqcC5L
+ 3/8” Drive Torque Wrench amzn.to/2orWvIR
+ Orange Rubber Tool Tray amzn.to/2VrrlNL
+ Magnetic Parts Holder amzn.to/324M2Sw
+ Dental Picks amzn.to/30WJLax
+ Tap & Die Set amzn.to/2AQRcFE
+ Deburring Wheel for Drill amzn.to/2VqELtJ
+ Fluting Pliers amzn.to/2OvhGV6
+ 1/8” (copper) Clecos amzn.to/2LXrcyz
+ 5/32” (black) Clecos amzn.to/30ZnGYW
+ 3/16” (gold) Clecos amzn.to/2Oyd1lk
+ Right-Angle Drill Attachment amzn.to/30Wp1zy
+ 300mm Metric/Standard Ruler amzn.to/35ec2wt
+ Vise-Grip Pliers amzn.to/2OtQciz
+ Round File amzn.to/32aMvlO
+ Flat File amzn.to/2VvdDJV
(By the way, I'm supposed to let you know that these are affiliate links. So if you make a purchase using these links, I will make a small commission (but at no extra cost to you 👍))
DISCLAIMER
This video is intended for informational purposes only, and may include information that is inaccurate or not applicable to any other situation. Use any information at your own risk. The individual views and opinions expressed here are solely those of the individual. Always follow manufacturer recommendations and FAA regulations and best practices.
#JeffAndAdamBuildaZenith #builditflyit #zenith750cruzer