Great looking bike! Hey I have a cm400t and just bought the headlight. I have a flasher module but can't figure out the wiring. Any way you can share to color matches for the red and black headlight to the wiring?
Hi Tim wonderful videos. I was wondering about the battery that you used for you bike. Did you purchase a special one or just use a stock battery ? In order for it to be rotated on the side has to be a gel battery correct ? Thanks and have a great one.
Where did you get your electrical connectors from? I want to replace my stock connectors as well. How easy is that? Thanks! Been watching this video series back-and-forth.
Hey Tim Cyrille here. Could you tell me what exact size you got for that electrical box from Cognito? I have the exact same bike and would like to replicate what you've done with your electrical storage. Cheers mate. LOVE the videos super helpful.
Hi Tim, me again. So I'm on Cognito's website looking at the electronic trays and in you're video you say you eventually ended up getting the tray for a CB550. On their site the trays for the CB550 look nothing like the one that figs so snuggly in your video (the holes for the screws are all wrong and the shape is also nowhere what you've got in your video). What am I not getting?
Hey Tim another quick question have you had any problems with your battery?? just wondering cause I have been trying to figure out what I want to do about what kind of battery I want to use and I have seen these ballistic battery's and antigravity battery's but they are super spendy and if you have had no problems with yours I will probably do the same battery you have.
Hey Tim i'm working on the same bike at 250cc and i want use something like this box for electrics.What dimensions of your box and where i can find it??
Quick question. what did you do with the breather hose on the valve cover that ran to the stock airbox?? just curious cause I'm currently doing a 81 cm400 build. did you just leave it off or run it somewhere else. and thank you for posting your build videos they have been loads help!
Ill be following closely. Read a LOT on hondatwins.net about carb issues once the factory airbox is gone... Also been looking into mikuni vm30 carbs as another option
+Tim Hines ill definitely be keeping an eye on your channel for info too!! check out jinxdog on twins. that was my buddies build and i have since taken it over to finish it up. still a work in progress of course but she turns heads
Congratulations for this great job! i also do a cb400N, i wanted to know if the battery you are using is the original amperage? because on mine it is 12Ah thank you
says that only has 80 CCA. is that enough with an electric start? I have a 190 CCA conventional duralast. have you had any issues with such a small CCA?
thanks so much! also if you dont mind, what did you end up doing for the oil breather since you removed the stock airbox? never worked on a bike before and this is my first, not totally sure where to go with it
are you sure that it wasn't this one? cognitomoto.com/collections/electronics/products/under-seat-electronics-tray-deep-cb750 . I only ask because the holes you have 4 drilled holes in the one in the video. Just making sure it will match my frame! Thank you. Great videos.
This video helped me order the right headlight mount bracket . Look for the ones with the hole centered.
Thank you for the help Tim. love what you did with your build looks awesome!
Great looking bike! Hey I have a cm400t and just bought the headlight. I have a flasher module but can't figure out the wiring. Any way you can share to color matches for the red and black headlight to the wiring?
less is more. dig it!
where did you get your seat??
Hi Tim wonderful videos. I was wondering about the battery that you used for you bike. Did you purchase a special one or just use a stock battery ? In order for it to be rotated on the side has to be a gel battery correct ? Thanks and have a great one.
Tim awesome videos. Do you have a place where you got the pan for the wiring bits.
Hey Tim sorry kind of a dumb question just didn't know if you went somewhere special for the connectors. Thanks :)
Hi Tim, great videos. I'm working on the same bike. Where can I find that exhaust setup you have?
Where did you get your electrical connectors from? I want to replace my stock connectors as well. How easy is that? Thanks! Been watching this video series back-and-forth.
Hey Tim where did you get the single smaller connectors ? and those rubber clamps ?
Hey Tim Cyrille here. Could you tell me what exact size you got for that electrical box from Cognito?
I have the exact same bike and would like to replicate what you've done with your electrical storage.
Cheers mate. LOVE the videos super helpful.
Hi Tim, me again. So I'm on Cognito's website looking at the electronic trays and in you're video you say you eventually ended up getting the tray for a CB550. On their site the trays for the CB550 look nothing like the one that figs so snuggly in your video (the holes for the screws are all wrong and the shape is also nowhere what you've got in your video). What am I not getting?
Hey Tim another quick question have you had any problems with your battery?? just wondering cause I have been trying to figure out what I want to do about what kind of battery I want to use and I have seen these ballistic battery's and antigravity battery's but they are super spendy and if you have had no problems with yours I will probably do the same battery you have.
Hey Tim i'm working on the same bike at 250cc and i want use something like this box for electrics.What dimensions of your box and where i can find it??
Any specific type of battery? that one looks smaller and slimmer then most I've seen. advice?
@@tims-garage Thank you
Where did you get the LED blinker module at? im looking to use LED blinkers on my cm400c, bit i need that module.
Quick question. what did you do with the breather hose on the valve cover that ran to the stock airbox?? just curious cause I'm currently doing a 81 cm400 build. did you just leave it off or run it somewhere else. and thank you for posting your build videos they have been loads help!
nvm found my answer haha, thanks for sharing
what kind of bars ar those? and grips?
love it so far... working on a cm400t myself.
i just stumbled across your series and its helping me a lot... what pods are you going with?
Ill be following closely. Read a LOT on hondatwins.net about carb issues once the factory airbox is gone...
Also been looking into mikuni vm30 carbs as another option
+Tim Hines ill definitely be keeping an eye on your channel for info too!!
check out jinxdog on twins. that was my buddies build and i have since taken it over to finish it up. still a work in progress of course but she turns heads
+Tim Hines www.hondatwins.net/forums/67-miscellaneous-discussion/23807-opinions-tanks.html
Congratulations for this great job!
i also do a cb400N, i wanted to know if the battery you are using is the original amperage?
because on mine it is 12Ah
thank you
OK.
your gel battery delivers how much of ah? tanks
says that only has 80 CCA. is that enough with an electric start? I have a 190 CCA conventional duralast. have you had any issues with such a small CCA?
Where to buy cdi? I'm from Philippines
Cdi?
What the link for the box
Got it at Cognitomoto
link for box?
hey tim, working on the same bike you have here, where did you find that tray you put your battery/electronics in?
thanks so much! also if you dont mind, what did you end up doing for the oil breather since you removed the stock airbox? never worked on a bike before and this is my first, not totally sure where to go with it
are you sure that it wasn't this one? cognitomoto.com/collections/electronics/products/under-seat-electronics-tray-deep-cb750 . I only ask because the holes you have 4 drilled holes in the one in the video. Just making sure it will match my frame! Thank you. Great videos.
Philip Allman I just asked the same question. Did you ever make a purchase? 550 or 750?